Date: Wed, 15 Mar 2017 10:04:38 +0000 From: bugzilla-noreply@freebsd.org To: freebsd-net@FreeBSD.org Subject: [Bug 217606] Bridge stops working after some days Message-ID: <bug-217606-2472-IuPjASey8R@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-217606-2472@https.bugs.freebsd.org/bugzilla/> References: <bug-217606-2472@https.bugs.freebsd.org/bugzilla/>
next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D217606 --- Comment #6 from Aiko Barz <aiko@torrentkino.de> --- Hardware: Dell PowerEdge R320 * Intel Xeon E5-2430 v2 (2,5GHz, 6C, 15MB Cache, 7,2GT/s QPI, 80W, Turbo) * PowerEdge R320 Mainboard, TPM * Intel Ethernet I350 DP 1Gbit/s Serveradapter, Low Profile * Intel X520 DP 10Gbit/s DA/SFP+ Serveradapter <--- bridge0 * 10GbE SR SFP+ Transceiver, 10GB and 1GB compatible with Intel and Broadcom Serveradapter This is the patched kernel as mentioned above. The other machine uses the vanilla kernel: $ dmesg Copyright (c) 1992-2016 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.0-RELEASE-p8 #0: Thu Mar 2 12:13:46 CET 2017 root@goldengate01:/usr/obj/usr/src/sys/GENERIC amd64 FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0) VT(vga): resolution 640x480 CPU: Intel(R) Xeon(R) CPU E5-2430 v2 @ 2.50GHz (2500.05-MHz K8-class CPU) Origin=3D"GenuineIntel" Id=3D0x306e4 Family=3D0x6 Model=3D0x3e Steppi= ng=3D4 =20 Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,= MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> =20 Features2=3D0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSS= E3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,O= SXSAVE,AVX,F16C,RDRAND> AMD Features=3D0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=3D0x1<LAHF> Structured Extended Features=3D0x281<FSGSBASE,SMEP,ERMS> XSAVE Features=3D0x1<XSAVEOPT> VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr TSC: P-state invariant, performance statistics real memory =3D 17179869184 (16384 MB) avail memory =3D 16531873792 (15766 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <DELL PE_SC3 > FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads random: unblocking device. ioapic1: Changing APIC ID to 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 32-55 on motherboard random: entropy device external interface kbd1 at kbdmux0 netmap: loaded module module_register_init: MOD_LOAD (vesa, 0xffffffff8101d970, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <DELL PE_SC3> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 cpu4: <ACPI CPU> on acpi0 cpu5: <ACPI CPU> on acpi0 cpu6: <ACPI CPU> on acpi0 cpu7: <ACPI CPU> on acpi0 cpu8: <ACPI CPU> on acpi0 cpu9: <ACPI CPU> on acpi0 cpu10: <ACPI CPU> on acpi0 cpu11: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 350 Event timer "HPET1" frequency 14318180 Hz quality 340 Event timer "HPET2" frequency 14318180 Hz quality 340 Event timer "HPET3" frequency 14318180 Hz quality 340 Event timer "HPET4" frequency 14318180 Hz quality 340 Event timer "HPET5" frequency 14318180 Hz quality 340 Event timer "HPET6" frequency 14318180 Hz quality 340 Event timer "HPET7" frequency 14318180 Hz quality 340 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 pci0: <ACPI PCI bus> numa-domain 0 on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 53 at device 1.0 numa-domain 0 on pci0 pci1: <ACPI PCI bus> numa-domain 0 on pcib1 mfi0: <Drake Skinny> port 0xfc00-0xfcff mem 0xd8ffc000-0xd8ffffff,0xd8f80000-0xd8fbffff irq 34 at device 0.0 numa-domai= n 0 on pci1 mfi0: Using MSI mfi0: Megaraid SAS driver Ver 4.23=20 pcib2: <ACPI PCI-PCI bridge> irq 53 at device 3.0 numa-domain 0 on pci0 pci2: <ACPI PCI bus> numa-domain 0 on pcib2 ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.1.13-k> po= rt 0xecc0-0xecdf mem 0xd9e80000-0xd9efffff,0xd9ff8000-0xd9ffbfff irq 48 at dev= ice 0.0 numa-domain 0 on pci2 ix0: Using MSIX interrupts with 9 vectors ix0: Ethernet address: xx:xx:xx:xx:xx:xx ix0: PCI Express Bus: Speed 5.0GT/s Width x8 ix0: netmap queues/slots: TX 8/2048, RX 8/2048 ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.1.13-k> po= rt 0xece0-0xecff mem 0xd9f00000-0xd9f7ffff,0xd9ffc000-0xd9ffffff irq 52 at dev= ice 0.1 numa-domain 0 on pci2 ix1: Using MSIX interrupts with 9 vectors ix1: Ethernet address: xx:xx:xx:xx:xx:xx ix1: PCI Express Bus: Speed 5.0GT/s Width x8 ix1: netmap queues/slots: TX 8/2048, RX 8/2048 pcib3: <PCI-PCI bridge> irq 16 at device 17.0 numa-domain 0 on pci0 pci3: <PCI bus> numa-domain 0 on pcib3 pci0: <simple comms> at device 22.0 (no driver attached) pci0: <simple comms> at device 22.1 (no driver attached) ehci0: <Intel Patsburg USB 2.0 controller> mem 0xdd0fd000-0xdd0fd3ff irq 23= at device 26.0 numa-domain 0 on pci0 usbus0: EHCI version 1.0 usbus0 numa-domain 0 on ehci0 pcib4: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci0 pci4: <ACPI PCI bus> numa-domain 0 on pcib4 igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> mem 0xdad00000-0xdadfffff,0xdaff8000-0xdaffbfff irq 16 at device 0.0 numa-domai= n 0 on pci4 igb0: Using MSIX interrupts with 9 vectors igb0: Ethernet address: xx:xx:xx:xx:xx:xx igb0: Bound queue 0 to cpu 0 igb0: Bound queue 1 to cpu 1 igb0: Bound queue 2 to cpu 2 igb0: Bound queue 3 to cpu 3 igb0: Bound queue 4 to cpu 4 igb0: Bound queue 5 to cpu 5 igb0: Bound queue 6 to cpu 6 igb0: Bound queue 7 to cpu 7 igb0: netmap queues/slots: TX 8/1024, RX 8/1024 igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> mem 0xdae00000-0xdaefffff,0xdaffc000-0xdaffffff irq 17 at device 0.1 numa-domai= n 0 on pci4 igb1: Using MSIX interrupts with 9 vectors igb1: Ethernet address: xx:xx:xx:xx:xx:xx igb1: Bound queue 0 to cpu 8 igb1: Bound queue 1 to cpu 9 igb1: Bound queue 2 to cpu 10 igb1: Bound queue 3 to cpu 11 igb1: Bound queue 4 to cpu 0 igb1: Bound queue 5 to cpu 1 igb1: Bound queue 6 to cpu 2 igb1: Bound queue 7 to cpu 3 igb1: netmap queues/slots: TX 8/1024, RX 8/1024 pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 numa-domain 0 on pci0 pci5: <ACPI PCI bus> numa-domain 0 on pcib5 bge0: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0xd50a0000-0xd50affff,0xd50b0000-0xd50bffff,0xd50c0000-0xd50cffff irq 16 at device 0.0 numa-domain 0 on pci5 bge0: APE FW version: NCSI v1.2.37.0 bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E miibus0: <MII bus> numa-domain 0 on bge0 brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Using defaults for TSO: 65518/35/2048 bge0: Ethernet address: xx:xx:xx:xx:xx:xx bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0xd50d0000-0xd50dffff,0xd50e0000-0xd50effff,0xd50f0000-0xd50fffff irq 17 at device 0.1 numa-domain 0 on pci5 bge1: APE FW version: NCSI v1.2.37.0 bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E miibus1: <MII bus> numa-domain 0 on bge1 brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: Using defaults for TSO: 65518/35/2048 bge1: Ethernet address: xx:xx:xx:xx:xx:xx pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.7 numa-domain 0 on pci0 pci6: <ACPI PCI bus> numa-domain 0 on pcib6 pcib7: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci6 pci7: <PCI bus> numa-domain 0 on pcib7 pcib8: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci7 pci8: <PCI bus> numa-domain 0 on pcib8 pcib9: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci8 pci9: <PCI bus> numa-domain 0 on pcib9 vgapci0: <VGA-compatible display> mem 0xd4000000-0xd4ffffff,0xdc7fc000-0xdc7fffff,0xdb800000-0xdbffffff irq 19 at device 0.0 numa-domain 0 on pci9 vgapci0: Boot video device pcib10: <PCI-PCI bridge> at device 1.0 numa-domain 0 on pci7 pci10: <PCI bus> numa-domain 0 on pcib10 ehci1: <Intel Patsburg USB 2.0 controller> mem 0xdd0fe000-0xdd0fe3ff irq 22= at device 29.0 numa-domain 0 on pci0 usbus1: EHCI version 1.0 usbus1 numa-domain 0 on ehci1 pcib11: <PCI-PCI bridge> at device 30.0 numa-domain 0 on pci0 pci11: <PCI bus> numa-domain 0 on pcib11 isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0 isa0: <ISA bus> numa-domain 0 on isab0 ahci0: <Intel Patsburg AHCI SATA controller> port 0xdce8-0xdcef,0xdcf8-0xdcfb,0xdcf0-0xdcf7,0xdcfc-0xdcff,0xdcc0-0xdcdf mem 0xdd0ff000-0xdd0ff7ff irq 20 at device 31.2 numa-domain 0 on pci0 ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 pcib12: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 pci12: <ACPI PCI bus> numa-domain 0 on pcib12 pcib13: <ACPI Host-PCI bridge> on acpi0 pci13: <ACPI PCI bus> on pcib13 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xec000-0xeffff on isa0 ppc0: cannot reserve I/O port range est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1f6200001c00 device_attach: est0 attach returned 6 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1f6200001c00 device_attach: est1 attach returned 6 est2: <Enhanced SpeedStep Frequency Control> on cpu2 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1f6200001c00 device_attach: est2 attach returned 6 est3: <Enhanced SpeedStep Frequency Control> on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1f6200001c00 device_attach: est3 attach returned 6 est4: <Enhanced SpeedStep Frequency Control> on cpu4 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1f6200001c00 device_attach: est4 attach returned 6 est5: <Enhanced SpeedStep Frequency Control> on cpu5 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1f6200001c00 device_attach: est5 attach returned 6 est6: <Enhanced SpeedStep Frequency Control> on cpu6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1f6200001c00 device_attach: est6 attach returned 6 est7: <Enhanced SpeedStep Frequency Control> on cpu7 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1f6200001c00 device_attach: est7 attach returned 6 est8: <Enhanced SpeedStep Frequency Control> on cpu8 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1f3900001c00 device_attach: est8 attach returned 6 est9: <Enhanced SpeedStep Frequency Control> on cpu9 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1f6200001c00 device_attach: est9 attach returned 6 est10: <Enhanced SpeedStep Frequency Control> on cpu10 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1f6200001c00 device_attach: est10 attach returned 6 est11: <Enhanced SpeedStep Frequency Control> on cpu11 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1f6200001c00 device_attach: est11 attach returned 6 mfi0: 1288 (541774932s/0x0020/info) - Shutdown command received from host mfi0: 1289 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0073/1000/1f51/1028) mfi0: 1290 (boot + 3s/0x0020/info) - Firmware version 2.121.14-3416 mfi0: 1291 (boot + 5s/0x0020/info) - Package version 20.13.0-0007 mfi0: 1292 (boot + 5s/0x0020/info) - Board Revision A06 mfi0: 1293 (boot + 31s/0x0004/info) - Enclosure PD 20(c None/p1) communicat= ion restored mfi0: 1294 (boot + 31s/0x0002/info) - Inserted: Encl PD 20 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec nvme cam probe device init mfisyspd0 numa-domain 0 on mfi0 mfisyspd0: 286102MB (585937500 sectors) SYSPD volume (deviceid: 0) mfisyspd0: SYSPD volume attached mfisyspd1 numa-domain 0 on mfi0 mfisyspd1: 286102MB (585937500 sectors) SYSPD volume (deviceid: 1) mfisyspd1: SYSPD volume attached mfi0: 1295 (boot + 31s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=3D20, scsiType=3Dd, portMap=3D00, sasAddr=3D5d81f060f497d900,0000000= 000000000 mfi0: 1296 (boot + 31s/0x0002/info) - Inserted: PD 00(e0x20/s0) mfi0: 1297 (boot + 31s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=3D20, scsiType=3D0, portMap=3D00, sasAddr=3D500003957801561a,0000000= 000000000 mfi0: 1298 (boot + 31s/0x0002/info) - Inserted: PD 01(e0x20/s1) mfi0: 1299 (boot + 31s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=3D20, scsiType=3D0, portMap=3D01, sasAddr=3D50000395780155f6,0000000= 000000000 mfi0: 1300 (541774984s/0x0020/info) - Time established as 03/02/17 13:03:04; (43 seconds since power on) mfi0: 1301 (541775071s/0x0020/info) - Host driver is loaded and operational usbus0: 480Mbps High Speed USB v2.0 usbus1: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ses0 at ahciem0 bus 0 scbus5 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device SMP: AP CPU #1 Launched! SMP: AP CPU #10 Launched! SMP: AP CPU #8 Launched! SMP: AP CPU #11 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #9 Launched! SMP: AP CPU #7 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #6 Launched! SMP: AP CPU #4 Launched! SMP: AP CPU #5 Launched! cd0 at ahcich4 bus 0 scbus4 target 0 lun 0 cd0: <HL-DT-ST DVD-ROM DU90N D300> Removable CD-ROM SCSI device cd0: Serial Number KMJE3BL2145 cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - t= ray closed Timecounter "TSC-low" frequency 1250026658 Hz quality 1000 Trying to mount root from zfs:zroot/ROOT/default []... Root mount waiting for: usbus1 usbus0 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered Root mount waiting for: usbus1 usbus0 ugen0.2: <vendor 0x8087> at usbus0 uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 ugen1.2: <vendor 0x8087> at usbus1 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 Root mount waiting for: usbus1 usbus0 uhub2: 6 ports with 6 removable, self powered uhub3: 8 ports with 8 removable, self powered ugen0.3: <no manufacturer> at usbus0 uhub4: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 3> on usbus0 Root mount waiting for: usbus0 uhub4: 6 ports with 6 removable, self powered ugen0.4: <Avocent> at usbus0 ukbd0: <Keyboard> on usbus0 kbd2 at ukbd0 bridge0: Ethernet address: xx:xx:xx:xx:xx:xx ix0: link state changed to UP ix0: link state changed to DOWN ix0: link state changed to UP ix1: link state changed to UP bge0: link state changed to DOWN ix0: promiscuous mode enabled bridge0: link state changed to UP ix1: promiscuous mode enabled ix0: link state changed to DOWN ix1: link state changed to DOWN ix0: link state changed to UP ix1: link state changed to UP ums0: <Mouse> on usbus0 ums0: 3 buttons and [Z] coordinates ID=3D0 ums1: <Mouse REL> on usbus0 ums1: 3 buttons and [XYZ] coordinates ID=3D0 pflog0: promiscuous mode enabled bge0: link state changed to UP bridge0: promiscuous mode enabled bridge0: promiscuous mode disabled bridge0: promiscuous mode enabled bridge0: promiscuous mode disabled bridge0: promiscuous mode enabled bridge0: promiscuous mode disabled bridge0: promiscuous mode enabled bridge0: promiscuous mode disabled bridge0: promiscuous mode enabled bridge0: promiscuous mode disabled mfi0: 1302 (541911600s/0x0020/WARN) - Patrol Read can't be started, as PDs = are either not ONLINE, or are in a VD with an active process, or are in an excl= uded VD bridge0: promiscuous mode enabled bridge0: promiscuous mode disabled bridge0: promiscuous mode enabled bridge0: promiscuous mode disabled ix1: link state changed to DOWN ix1: link state changed to UP ix1: link state changed to DOWN ix1: link state changed to UP ix0: link state changed to DOWN ix0: link state changed to UP ix0: link state changed to DOWN ix0: link state changed to UP [zone: pf frag entries] PF frag entries limit reached mfi0: 1303 (542516400s/0x0020/WARN) - Patrol Read can't be started, as PDs = are either not ONLINE, or are in a VD with an active process, or are in an excl= uded VD ix0: link state changed to DOWN ix0: link state changed to UP ix1: link state changed to DOWN ix1: link state changed to UP --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-217606-2472-IuPjASey8R>