Date: Fri, 7 Mar 2008 16:38:49 +0100 From: "d_elbracht" <d_elbracht@ecngs.de> To: "'Scott Long'" <scottl@samsco.org> Cc: freebsd-scsi@freebsd.org Subject: AW: AW: only 8 LUNs on MPT Message-ID: <003801c88069$57510cb0$639049d9@EC1a> In-Reply-To: <47D1605A.8030505@samsco.org> References: <001301c88056$76745f60$639049d9@EC1a> <47D152B6.7030307@samsco.org><001e01c88063$3a1b3b80$639049d9@EC1a> <47D1605A.8030505@samsco.org>
next in thread | previous in thread | raw e-mail | index | archive | help
the tunable is set: sysctl -a | grep kern.cam.cam_srch kern.cam.cam_srch_hi: 1 here is the output from 'camcontrol inq da45': pass45: <IFT S16S-G1030 361F> Fixed Direct Access SCSI-4 device pass45: Serial Number 01F53A00000000472CF136000000 300.000MB/s transfers , Command Queueing Enabled Dieter > -----Ursprüngliche Nachricht----- > Von: owner-freebsd-scsi@freebsd.org > [mailto:owner-freebsd-scsi@freebsd.org] Im Auftrag von Scott Long > Gesendet: Freitag, 7. März 2008 16:34 > An: d_elbracht > Cc: freebsd-scsi@freebsd.org > Betreff: Re: AW: only 8 LUNs on MPT > > d_elbracht wrote: > > adding > > > > kern.cam.cam_srch_hi=1 > > > > to /boot/loader.conf did not change anything. > > still da52 remains the highest device. I would expect da53 > to show up. > > > > did I miss something ? > > > > Dieter > > > > Can you send me the output of 'camcontrol inq da45'. It > might be that this device is reporting itself as SCSI-2 > instead of SCSI-3. Also, you can verify that the tunable got > set in the loader by checking it with the sysctl command. > > Scott > > _______________________________________________ > freebsd-scsi@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-scsi > To unsubscribe, send any mail to > "freebsd-scsi-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?003801c88069$57510cb0$639049d9>