Date: Mon, 11 Feb 2008 00:40:06 GMT From: Rick Voland <rpvoland@spamcop.net> To: freebsd-scsi@FreeBSD.org Subject: Re: kern/120487: [sg] scsi_sg incompatible with scanners Message-ID: <200802110040.m1B0e6iC061457@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/120487; it has been noted by GNATS. From: Rick Voland <rpvoland@spamcop.net> To: Scott Long <scottl@samsco.org> Cc: bug-followup@FreeBSD.org, rpvoland@spamcop.net Subject: Re: kern/120487: [sg] scsi_sg incompatible with scanners Date: Sun, 10 Feb 2008 18:32:53 -0600 So, the scanners are detected both ways. I looked, but didn't see the pass* and sg* devices yesterday with sg in the kernel. #with sg in kernel and scanners turned on $ sudo camcontrol devlist -v Password: scbus0 on dpt0 bus 0: <SEAGATE ST318417W 0105> at scbus0 target 0 lun 0 (da0,sg0,pass0) <SEAGATE ST36530W 1206> at scbus0 target 1 lun 0 (da1,sg1,pass1) <PLEXTOR CD-ROM PX-32CS 1.01> at scbus0 target 3 lun 0 (sg2,pass2,cd0) < > at scbus0 target -1 lun -1 () scbus1 on aha1 bus 0: <Minolta #2883 1.02> at scbus1 target 2 lun 0 (sg3,pass3) <HP C5110A 3701> at scbus1 target 3 lun 0 (sg4,pass4) <YAMAHA CRW6416S 1.0d> at scbus1 target 4 lun 0 (sg5,pass5,cd1) <CWS ORB2 -SE U ID 5 D42> at scbus1 target 5 lun 0 (da2,sg6,pass6) < > at scbus1 target -1 lun -1 () scbus-1 on xpt0 bus 0: < > at scbus-1 target -1 lun -1 (xpt0) $ ############################################## #without sg in kernel, with scanners turned on $ sudo camcontrol devlist -v Password: scbus0 on dpt0 bus 0: <SEAGATE ST318417W 0105> at scbus0 target 0 lun 0 (da0,pass0) <SEAGATE ST36530W 1206> at scbus0 target 1 lun 0 (da1,pass1) <PLEXTOR CD-ROM PX-32CS 1.01> at scbus0 target 3 lun 0 (pass2,cd0) < > at scbus0 target -1 lun -1 () scbus1 on aha2 bus 0: <Minolta #2883 1.02> at scbus1 target 2 lun 0 (pass3) <HP C5110A 3701> at scbus1 target 3 lun 0 (pass4) <YAMAHA CRW6416S 1.0d> at scbus1 target 4 lun 0 (pass5,cd1) <CWS ORB2 -SE U ID 5 D42> at scbus1 target 5 lun 0 (da2,pass6) < > at scbus1 target -1 lun -1 () scbus-1 on xpt0 bus 0: < > at scbus-1 target -1 lun -1 (xpt0) $ ----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200802110040.m1B0e6iC061457>