Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 13 Apr 2008 05:45:14 +0000 (UTC)
From:      Qing Li <qingli@FreeBSD.org>
To:        src-committers@FreeBSD.org, cvs-src@FreeBSD.org, cvs-all@FreeBSD.org
Subject:   cvs commit: src/sys/conf files options src/sys/net radix.c radix.h route.c route.h rtsock.c src/sys/netinet in_proto.c ip_output.c src/sys/netinet6 in6_proto.c in6_src.c nd6_nbr.c
Message-ID:  <200804130545.m3D5jEtd081771@repoman.freebsd.org>

next in thread | raw e-mail | index | archive | help
qingli      2008-04-13 05:45:14 UTC

  FreeBSD src repository

  Modified files:
    sys/conf             files options 
    sys/net              radix.c radix.h route.c route.h rtsock.c 
    sys/netinet          in_proto.c ip_output.c 
    sys/netinet6         in6_proto.c in6_src.c nd6_nbr.c 
  Log:
  This patch provides the back end support for equal-cost multi-path
  (ECMP) for both IPv4 and IPv6. Previously, multipath route insertion
  is disallowed. For example,
  
          route add -net 192.103.54.0/24 10.9.44.1
          route add -net 192.103.54.0/24 10.9.44.2
  
  The second route insertion will trigger an error message of
  "add net 192.103.54.0/24: gateway 10.2.5.2: route already in table"
  
  Multiple default routes can also be inserted. Here is the netstat
  output:
  
  default         10.2.5.1        UGS     0       3074    bge0 =>
  default         10.2.5.2        UGS     0       0       bge0
  
  When multipath routes exist, the "route delete" command requires
  a specific gateway to be specified or else an error message would
  be displayed. For example,
  
          route delete default
  
  would fail and trigger the following error message:
  
  "route: writing to routing socket: No such process"
  "delete net default: not in table"
  
  On the other hand,
  
          route delete default 10.2.5.2
  
  would be successful: "delete net default: gateway 10.2.5.2"
  
  One does not have to specify a gateway if there is only a single
  route for a particular destination.
  
  I need to perform more testings on address aliases and multiple
  interfaces that have the same IP prefixes. This patch as it
  stands today is not yet ready for prime time. Therefore, the ECMP
  code fragments are fully guarded by the RADIX_MPATH macro.
  Include the "options  RADIX_MPATH" in the kernel configuration
  to enable this feature.
  
  Reviewed by:    robert, sam, gnn, julian, kmacy
  
  Revision  Changes    Path
  1.1289    +1 -0      src/sys/conf/files
  1.625     +1 -0      src/sys/conf/options
  1.39      +22 -0     src/sys/net/radix.c
  1.27      +1 -0      src/sys/net/radix.h
  1.127     +121 -1    src/sys/net/route.c
  1.69      +3 -0      src/sys/net/route.h
  1.145     +20 -0     src/sys/net/rtsock.c
  1.88      +8 -0      src/sys/netinet/in_proto.c
  1.280     +9 -0      src/sys/netinet/ip_output.c
  1.49      +8 -0      src/sys/netinet6/in6_proto.c
  1.50      +9 -0      src/sys/netinet6/in6_src.c
  1.50      +14 -0     src/sys/netinet6/nd6_nbr.c



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200804130545.m3D5jEtd081771>