Date: Mon, 04 Oct 2004 13:41:08 +0200 From: Ralf Wenk <RZ-FreeBSD1004@fh-karlsruhe.de> To: FreeBSD-gnats-submit@FreeBSD.org Cc: Ralf Wenk <RZ-FreeBSD1004@fh-karlsruhe.de> Subject: kern/72301: Cardbus card activation broken with FreeBSD 5.3-BETA7 Message-ID: <E1CERDI-0000GE-F4@localhost> Resent-Message-ID: <200410041150.i94BoNPF040193@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 72301 >Category: kern >Synopsis: Cardbus card activation broken with FreeBSD 5.3-BETA7 >Confidential: no >Severity: critical >Priority: high >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Mon Oct 04 11:50:23 GMT 2004 >Closed-Date: >Last-Modified: >Originator: Ralf Wenk >Release: FreeBSD 5.3-BETA7 i386 >Organization: FH Karlsruhe, University of Applied Sciences >Environment: System: FreeBSD rz-tp390x 5.3-BETA7 FreeBSD 5.3-BETA7 #4: Sun Oct 3 22:54:47 CEST 2004 root@:/usr/src/sys/i386/compile/GENERIC on a IBM ThinkPad 390X >Description: FreeBSD 5.3-BETA7 breaks cardbus card activation leaving machine without network interface. FreeBSD 5.2.1-RELEASE-p10 works as shown. Booting the 5.2.1-RELEASE-p10 kernel shows Rebooting... Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2.1-RELEASE-p10 #12: Sat Oct 2 11:40:51 CEST 2004 root@rz-tp390x:/usr/src/sys/i386/compile/tp390x Preloaded elf kernel "/boot/kernel.521.old/kernel" at 0xc07a6000. Preloaded elf module "/boot/kernel.521.old/snd_solo.ko" at 0xc07a61fc. Preloaded elf module "/boot/kernel.521.old/snd_pcm.ko" at 0xc07a62b4. Preloaded elf module "/boot/kernel.521.old/apm.ko" at 0xc07a6368. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Pentium II/Pentium II Xeon/Celeron (398.05-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x66a Stepping = 10 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 201261056 (191 MB) avail memory = 190033920 (181 MB) Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pcibios: BIOS version 2.10 Using $PIR table, 8 entries at 0xc00fdf40 apm0: <APM BIOS> on motherboard apm0: found APM BIOS v1.2, connected at v1.2 pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci_cfgintr: 0:2 INTD BIOS irq 11 pci_cfgintr: 0:3 INTA BIOS irq 11 pci_cfgintr: 0:3 INTA BIOS irq 11 pci_cfgintr: 0:6 INTA BIOS irq 11 pci_cfgintr: 0:7 INTA BIOS irq 5 agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci_cfgintr: 1:0 INTA BIOS irq 11 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x10c0-0x10cf at device 2.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq 11 at device 2.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge, PCI-unknown> at device 2.3 (no driver attached) cbb0: <TI1251B PCI-CardBus Bridge> irq 11 at device 3.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb1: <TI1251B PCI-CardBus Bridge> irq 11 at device 3.1 on pci0 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [MPSAFE] pci0: <simple comms> at device 6.0 (no driver attached) pcm0: <ESS Solo-1 (unknown vendor)> port 0x10f8-0x10fb,0x10fc-0x10ff,0x10d0-0x10df,0x10e0-0x10ef,0x1080-0x10bf irq 5 at device 7.0 on pci0 orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0303> can't assign resources (port) unknown: <PNP0c02> can't assign resources (port) unknown: <PNP0700> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <IBM3780> can't assign resources (irq) unknown: <PNP0400> can't assign resources (port) Timecounters tick every 10.000 msec cbb1: bad Vcc request. ctrl=0x33, status=0x30000b20 cbb_power: 3V dc0: <Xircom X3201 10/100BaseTX> port 0x1100-0x117f mem 0x88002000-0x880027ff,0x88002800-0x88002fff irq 11 at device 0.0 on cardbus1 dc0: Ethernet address: 00:06:29:52:42:e4 miibus0: <MII bus> on dc0 tdkphy0: <TDK 78Q2120 media interface> on miibus0 tdkphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto GEOM: create disk ad0 dp=0xc235e660 ad0: 6194MB <IBM-DBCA-206480> [13424/15/63] at ata0-master UDMA33 acd0: CDROM <CRN-8241B> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s1a while booting the 5.3-BETA kernel shows Rebooting... Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-BETA7 #4: Sun Oct 3 22:54:47 CEST 2004 root@:/usr/src/sys/i386/compile/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Pentium II/Pentium II Xeon/Celeron (398.05-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x66a Stepping = 10 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 201261056 (191 MB) avail memory = 187277312 (178 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface apm0: <APM BIOS> on motherboard apm0: found APM BIOS v1.2, connected at v1.2 pcib0: <Intel 82443BX (440 BX) host to PCI bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 8 Entries> on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf8000000-0xfbffffff at d evice 0.0 on pci0 pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x10c0-0x10cf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 2.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq 11 at device 2.2 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered piix0: <PIIX Timecounter> port 0x1040-0x104f at device 2.3 on pci0 Timecounter "PIIX" frequency 3579545 Hz quality 0 cbb0: <TI1251B PCI-CardBus Bridge> irq 11 at device 3.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb_power_call: 0V cbb0: bad Vcc request. ctrl=0xf000ff00, status=0xf000e2c3 cbb_power: 0V cbb1: <TI1251B PCI-CardBus Bridge> irq 11 at device 3.1 on pci0 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb_power_call: 0V cbb1: bad Vcc request. ctrl=0x7200700, status=0x7200720 cbb_power: 0V pci0: <simple comms> at device 6.0 (no driver attached) pcm0: <ESS Solo-1 (unknown vendor)> port 0x10f8-0x10fb,0x10fc-0x10ff,0x10d0-0x10df,0x10e0-0x10ef,0x1080-0x10bf irq 5 at device 7.0 on pci0 pcm0: [GIANT-LOCKED] cpu0 on motherboard orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0c01> can't assign resources (memory) unknown: <PNP0303> can't assign resources (port) unknown: <PNP0c02> can't assign resources (port) ahc0: No resources allocated. ahc0: No resources allocated. unknown: <PNP0700> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) ahc0: No resources allocated. unknown: <IBM3780> can't assign resources (irq) unknown: <PNP0400> can't assign resources (port) Timecounters tick every 10.000 msec cbb1: bad Vcc request. ctrl=0xf200f00, status=0xf200f20 cbb_power: 0V cbb1: bad Vcc request. ctrl=0xf200f33, status=0xf200f20 cbb_power: 3V cbb1: bad Vcc request. ctrl=0xf200f00, status=0xf200f20 cbb_power: 0V cbb1: CardBus card activation failed ad0: 6194MB <IBM-DBCA-206480/BC4OA87F> [13424/15/63] at ata0-master UDMA33 acd0: CDROM <CRN-8241B/1.22a> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s1a >How-To-Repeat: Do an update from RELENG_5_2 to RELENG_5. You will possible need the same hardware to repeat. >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E1CERDI-0000GE-F4>