Date: Wed, 8 Mar 2017 23:01:19 -0800 From: Adrian Chadd <adrian.chadd@gmail.com> To: Trev <freebsd-wifi@sentry.org> Cc: "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org> Subject: Re: Mac Mini late 2009 BCM4321 issues :) Message-ID: <CAJ-VmokiPU543ZHn-K4Z1K91FSd6ZV-mT%2BnKDH9v5OCSv_vn5g@mail.gmail.com> In-Reply-To: <6e188362-fad7-4dee-967b-1280ebe8978e@sentry.org> References: <6e188362-fad7-4dee-967b-1280ebe8978e@sentry.org>
next in thread | previous in thread | raw e-mail | index | archive | help
hiya,
CAn you try freebsd-head? I'm sure I fixed bwn enough to work in
freebsd-head. I don't know how things could've broken in freebsd-11
though!
-adrian
On 8 March 2017 at 22:55, Trev <freebsd-wifi@sentry.org> wrote:
> 1A, uname -a shows:
>
> FreeBSD citadel.sentry.org 11.0-STABLE FreeBSD 11.0-STABLE #0 \
> r314907M: Thu Mar 9 04:26:47 AEDT 2017 \
> root@citadel.sentry.org:/usr/obj/usr/src/sys/GENERIC amd64
>
>
> 1B. dmesg shows:
>
> siba_bwn0: <Broadcom BCM4321 802.11a/b/g/n Wireless> \
> mem 0xd3200000-0xd3203fff at device 0.0 on pci3
> siba_bwn0: warn: multiple PCI(E) cores
> siba_bwn0: unsupported coreid (USB 1.1 Host)
> bwn0 on siba_bwn0
> bwn0: WLAN (chipid 0x4321 rev 12) PHY (analog 5 type 4 rev 2) \
> RADIO (manuf 0x17f ver 0x2055 rev 4)
> bwn0: DMA (64 bits)
> bwn0: Note: compiled with BWN_GPL_PHY; includes GPLv2 code
> bwn0: Using 1 MSI messages
>
>
> 2. wpa_supplicant.conf contains:
>
> network={
> ssid="WLAN24G"
> psk="my_password"
> }
>
>
> 3, wlan0 is created with:
>
> ifconfig wlan0 create wlandev bwn0 wlanaddr 48:02:2a:63:4e:c1 \
> inet 192.168.1.99 channel 3
>
> Note: Unless I specify a wlanaddr then wlan0 is created with a mac address
> of ff:ff:ff:ff:ff:ff
>
>
> 4. ifconfig wlan0 shows:
>
> wlan0: flags=8c02<BROADCAST,OACTIVE,SIMPLEX,MULTICAST> metric 0 mtu 1500
> ether 48:02:2a:63:4e:c1
> inet 192.168.1.99 netmask 0xffffff00 broadcast 192.168.1.255
> inet6 fe80::4a02:2aff:fe63:4ec1%wlan0 prefixlen 64 tentative scopeid
> 0x3
> nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
> media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
> status: no carrier
> ssid "" channel 3 (2422 MHz 11g)
> regdomain FCC country US authmode OPEN privacy OFF txpower 30 bmiss
> 7
> scanvalid 60 protmode CTS wme
> groups: wlan
>
>
> 5. ifconfig wlan0 scan shows (among others):
> SSID/MESH ID BSSID CHAN RATE S:N INT CAPS
> WLAN24G 34:31:c4:bc:d0:21 3 54M -77:-95 100 EPS HTCAP WME
> ATH RSN
>
>
> 5. wpa_supplicant -dd -i wlan0 -c /etc/wpa_supplicant.conf produces:
>
> wpa_supplicant v2.5
> Successfully initialized wpa_supplicant
> Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver
> 'default' ctrl_interface 'N/A' bridge 'N/A'
> Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
> Reading configuration file '/etc/wpa_supplicant.conf'
> Line: 5 - start of a new network block
> ssid - hexdump_ascii(len=7):
> 57 4c 41 4e 32 34 47 WLAN24G
> PSK (ASCII passphrase) - hexdump_ascii(len=16): [REMOVED]
> PSK (from passphrase) - hexdump(len=32): [REMOVED]
> Priority group 0
> id=0 ssid='WLAN24G'
> wpa_driver_bsd_capa: drivercaps=0x0581e801,cryptocaps=0x00000000
> Add interface wlan0 to a new radio N/A
> wlan0: Own MAC address: 48:02:2a:63:4e:c1
> bsd_set_key: alg=0 addr=0x0 key_idx=0 set_tx=0 seq_len=0 key_len=0
> bsd_del_key: key_idx=0
> bsd_set_key: alg=0 addr=0x0 key_idx=1 set_tx=0 seq_len=0 key_len=0
> bsd_del_key: key_idx=1
> bsd_set_key: alg=0 addr=0x0 key_idx=2 set_tx=0 seq_len=0 key_len=0
> bsd_del_key: key_idx=2
> bsd_set_key: alg=0 addr=0x0 key_idx=3 set_tx=0 seq_len=0 key_len=0
> bsd_del_key: key_idx=3
> wpa_driver_bsd_set_countermeasures: enabled=0
> wlan0: RSN: flushing PMKID list in the driver
> wlan0: Setting scan request: 0.100000 sec
> wlan0: WPS: UUID based on MAC address: dbcf9172-a2c4-5074-bfc2-05bfaecc535f
> ENGINE: Loading dynamic engine
> ENGINE: Loading dynamic engine
> EAPOL: SUPP_PAE entering state DISCONNECTED
> EAPOL: Supplicant port status: Unauthorized
> EAPOL: KEY_RX entering state NO_KEY_RECEIVE
> EAPOL: SUPP_BE entering state INITIALIZE
> EAP: EAP entering state DISABLED
> wlan0: Added interface wlan0
> wlan0: State: DISCONNECTED -> DISCONNECTED
> wlan0: State: DISCONNECTED -> SCANNING
> wlan0: Starting AP scan for wildcard SSID
> wlan0: Add radio work 'scan'@0x801ce4000
> wlan0: First radio work item in the queue - schedule start immediately
> wlan0: Starting radio work 'scan'@0x801ce4000 after 0.000012 second wait
> wpa_driver_bsd_set_wpa: enabled=1
> wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
> wlan0: Event SCAN_RESULTS (3) received
> Received 868 bytes of scan results (4 BSSes)
> wlan0: BSS: Start scan result update 1
> wlan0: BSS: Add new id 0 BSSID 48:02:2a:61:6a:24 SSID 'router-2' freq 2422
> wlan0: BSS: Add new id 1 BSSID 48:02:2a:63:4e:c0 SSID 'router-3' freq 2422
> wlan0: BSS: Add new id 2 BSSID 34:31:c4:bc:d0:21 SSID 'WLAN24G' freq 2422
> wlan0: BSS: Add new id 3 BSSID 44:33:4c:b5:d3:68 SSID 'router-4' freq 2422
> BSS: last_scan_res_used=4/32
> wlan0: New scan results available (own=0 ext=0)
> wlan0: Radio work 'scan'@0x801ce4000 done in 0.212149 seconds
> wlan0: Selecting BSS from priority group 0
> wlan0: 0: 48:02:2a:61:6a:24 ssid='router-2' wpa_ie_len=0 rsn_ie_len=20
> caps=0x11 level=-66 freq=2422
> wlan0: skip - SSID mismatch
> wlan0: 1: 48:02:2a:63:4e:c0 ssid='router-3' wpa_ie_len=0 rsn_ie_len=20
> caps=0x11 level=-69 freq=2422
> wlan0: skip - SSID mismatch
> wlan0: 2: 34:31:c4:bc:d0:21 ssid='WLAN24G' wpa_ie_len=0 rsn_ie_len=20
> caps=0x31 level=-77 freq=2422
> wlan0: selected based on RSN IE
> wlan0: selected BSS 34:31:c4:bc:d0:21 ssid='WLAN24G'
> wlan0: Considering connect request: reassociate: 0 selected:
> 34:31:c4:bc:d0:21 bssid: 00:00:00:00:00:00 pending: 00:00:00:00:00:00
> wpa_state: SCANNING ssid=0x801c45000 current_ssid=0x0
> wlan0: Request association with 34:31:c4:bc:d0:21
> wlan0: Add radio work 'connect'@0x801ce4000
> wlan0: First radio work item in the queue - schedule start immediately
> wlan0: Starting radio work 'connect'@0x801ce4000 after 0.000009 second wait
> wlan0: Trying to associate with 34:31:c4:bc:d0:21 (SSID='WLAN24G' freq=2422
> MHz)
> FT: Stored MDIE and FTIE from (Re)Association Response - hexdump(len=0):
> wlan0: Cancelling scan request
> wlan0: WPA: clearing own WPA/RSN IE
> wlan0: Automatic auth_alg selection: 0x1
> RSN: PMKSA cache search - network_ctx=0x801c45000 try_opportunistic=0
> RSN: Search for BSSID 34:31:c4:bc:d0:21
> RSN: No PMKSA cache entry found
> wlan0: RSN: using IEEE 802.11i/D9.0
> wlan0: WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2
> wlan0: WPA: clearing AP WPA IE
> WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac
> 04 01 00 00 0f ac 02 00 00
> wlan0: WPA: using GTK CCMP
> wlan0: WPA: using PTK CCMP
> wlan0: WPA: using KEY_MGMT WPA-PSK
> WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00
> 00 0f ac 04 01 00 00 0f ac 02 00 00
> wlan0: State: SCANNING -> ASSOCIATING
> Limit connection to BSSID 34:31:c4:bc:d0:21 freq=2422 MHz based on scan
> results (bssid_set=0)
> wpa_driver_bsd_associate: ssid 'WLAN24G' wpa ie len 22 pairwise 16 group 16
> key mgmt 2
> wpa_driver_bsd_set_drop_unencrypted: enabled=1
> bsd_set_opt_ie: set WPA+RSN ie (len 22)
> wpa_driver_bsd_associate: set PRIVACY 1
> wlan0: Setting authentication timeout: 10 sec 0 usec
> EAPOL: External notification - EAP success=0
> EAPOL: External notification - EAP fail=0
> EAPOL: External notification - portControl=Auto
> EAPOL: disable timer tick
> wlan0: Authentication with 34:31:c4:bc:d0:21 timed out.
> Added BSSID 34:31:c4:bc:d0:21 into blacklist
> wlan0: WPA: Clear old PMK and PTK
> wlan0: Request to deauthenticate - bssid=00:00:00:00:00:00
> pending_bssid=34:31:c4:bc:d0:21 reason=3 state=ASSOCIATING
> wlan0: Event DEAUTH (12) received
> wlan0: Deauthentication notification
> wlan0: * reason 3 (locally generated)
> Deauthentication frame IE(s) - hexdump(len=0): [NULL]
> wlan0: CTRL-EVENT-DISCONNECTED bssid=34:31:c4:bc:d0:21 reason=3
> locally_generated=1
> wlan0: Auto connect enabled: try to reconnect (wps=0/0 wpa_state=5)
> wlan0: Setting scan request: 0.100000 sec
> wlan0: Radio work 'connect'@0x801ce4000 done in 10.022229 seconds
> [etc]
>
> and never manages to associate successfully.
>
> Any ideas?
>
> Thanks,
> TREV.
> _______________________________________________
> freebsd-wireless@freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-wireless
> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-VmokiPU543ZHn-K4Z1K91FSd6ZV-mT%2BnKDH9v5OCSv_vn5g>