Date: Mon, 10 Apr 2006 19:09:30 GMT From: Marcel Moolenaar <marcel@FreeBSD.org> To: Perforce Change Reviews <perforce@freebsd.org> Subject: PERFORCE change 94942 for review Message-ID: <200604101909.k3AJ9U0W041808@repoman.freebsd.org>
next in thread | raw e-mail | index | archive | help
http://perforce.freebsd.org/chv.cgi?CH=94942 Change 94942 by marcel@marcel_nfs on 2006/04/10 19:08:57 Allow non-standard rclk values for PCI cards and attach those single-UART PCI boards with uart(4) and not puc(4). Affected files ... .. //depot/projects/uart/dev/puc/pucdata.c#17 edit .. //depot/projects/uart/dev/uart/uart_bus_pci.c#12 edit Differences ... ==== //depot/projects/uart/dev/puc/pucdata.c#17 (text+ko) ==== @@ -798,16 +798,6 @@ }, }, - /* Oxford Semiconductor OXCB950 PCI/CardBus UARTs */ - { "Oxford Semiconductor OXCB950 UART", - { 0x1415, 0x950b, 0, 0 }, - { 0xffff, 0xffff, 0, 0 }, - { - /* { PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ }, */ - { PUC_PORT_TYPE_COM, 0x10, 0x00, 16384000 }, - }, - }, - /* * Oxford Semiconductor OX9160/OX16PCI954 PCI UARTS * Second chip on Exsys EX-41098 8x cards @@ -1165,21 +1155,6 @@ }, }, - { "Dell RAC III Virtual UART", - { 0x1028, 0x0008, 0, 0 }, - { 0xffff, 0xffff, 0, 0 }, - { - { PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ * 128 }, - }, - }, - - { "Dell RAC IV/ERA Virtual UART", - { 0x1028, 0x0012, 0, 0 }, - { 0xffff, 0xffff, 0, 0 }, - { - { PUC_PORT_TYPE_COM, 0x14, 0x00, DEFAULT_RCLK * 128 }, - }, - }, { /* "VScom 200Li" 00=14D2 02=8028 uart@20 uart@+8 */ "VScom 200Li", { 0x14d2, 0x8028, 0, 0 }, ==== //depot/projects/uart/dev/uart/uart_bus_pci.c#12 (text+ko) ==== @@ -40,6 +40,8 @@ #include <dev/uart/uart.h> #include <dev/uart/uart_bus.h> +#define DEFAULT_RCLK 1843200 + static int uart_pci_probe(device_t dev); static device_method_t uart_pci_methods[] = { @@ -60,13 +62,17 @@ uint32_t type; const char *desc; int rid; + int rclk; }; static struct pci_id pci_ns8250_ids[] = { { 0x048011c1, "Actiontec 56K PCI Master", 0x14 }, + { 0x00081028, "Dell RAC III Virtual UART", 0x14, 128*DEFAULT_RCLK }, + { 0x00121028, "Dell RAC IV/ERA Virtual UART", 0x14, 128*DEFAULT_RCLK }, { 0x01101407, "Lava Computers serial port", 0x10 }, { 0x01111407, "Lava Computers serial port", 0x10 }, { 0x9051deaf, "Middle Digital, Inc. Weasel serial port", 0x10 }, + { 0x950b1415, "Oxford Semiconductor OXCB950 UART", 0x10, 16384000 }, { 0x01c0135c, "Quatech SSCLP-200/300", 0x18 /* * NB: You must mount the "SPAD" jumper to correctly detect @@ -115,7 +121,7 @@ match: if (id->desc) device_set_desc(dev, id->desc); - return (uart_bus_probe(dev, 0, 0, id->rid, 0)); + return (uart_bus_probe(dev, 0, id->rclk, id->rid, 0)); } DRIVER_MODULE(uart, pci, uart_pci_driver, uart_devclass, 0, 0);
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200604101909.k3AJ9U0W041808>