Date: Thu, 1 Jun 2000 12:58:18 +1000 (EST) From: Carl Makin <carl@xena.aipo.gov.au> To: freebsd-scsi@freebsd.org, freebsd-stable@freebsd.org Subject: QLogic 2200 to IBM ESS (Shark) via SAN Data Gateway. Message-ID: <Pine.BSF.4.21.0006011252340.4914-100000@newton.aipo.gov.au>
next in thread | raw e-mail | index | archive | help
Is anyone using a QLogic 2200 FC card that can help me with a problem. I'm trying to get a 4.0-STABLE box qith a QLogic 2200 card talking to an IBM ESS 2105-E20 (Shark) via an IBM SAN Data Gateway. The card is seeing the two LUNS as delivered by the ESS through the Gateway but they are not being properly configured by the isp driver. Here is some dmesg output; isp0: <Qlogic ISP 2200 PCI FC-AL Adapter> port 0xfc00-0xfcff mem 0xfeb00000-0xfeb00fff irq 5 at device 1.0 on pci3 isp0: Firmware State Config Wait -> Ready isp0: Target 0 (Loop 0x0) Port ID 0xef role Target arrived Port WWN 0x20010060451604e5 Node WWN 0x10000060451604e5 pass2 at isp0 bus 0 target 0 lun 0 pass2: <PATHLGHT SAN Gateway 328e> Fixed Storage Arrray SCSI-3 device pass2: 100.000MB/s transfers, Tagged Queueing Enabled pass3 at isp0 bus 0 target 0 lun 1 pass3: <PATHLGHT SAN Gateway 328e> Fixed Storage Arrray SCSI-3 device pass3: 100.000MB/s transfers, Tagged Queueing Enabled pass4 at isp0 bus 0 target 0 lun 2 pass4: <PATHLGHT SAN Gateway 328e> Fixed Storage Arrray SCSI-3 device pass4: 100.000MB/s transfers, Tagged Queueing Enabled pass5 at isp0 bus 0 target 0 lun 3 pass5: <PATHLGHT SAN Gateway 328e> Fixed Storage Arrray SCSI-3 device pass5: 100.000MB/s transfers, Tagged Queueing Enabled pass6 at isp0 bus 0 target 0 lun 4 pass6: <PATHLGHT SAN Gateway 328e> Fixed Storage Arrray SCSI-3 device pass6: 100.000MB/s transfers, Tagged Queueing Enabled pass7 at isp0 bus 0 target 0 lun 5 pass7: <PATHLGHT SAN Gateway 328e> Fixed Storage Arrray SCSI-3 device pass7: 100.000MB/s transfers, Tagged Queueing Enabled pass8 at isp0 bus 0 target 0 lun 6 pass8: <PATHLGHT SAN Gateway 328e> Fixed Storage Arrray SCSI-3 device pass8: 100.000MB/s transfers, Tagged Queueing Enabled pass9 at isp0 bus 0 target 0 lun 7 pass9: <PATHLGHT SAN Gateway 328e> Fixed Storage Arrray SCSI-3 device pass9: 100.000MB/s transfers, Tagged Queueing Enabled There is an 8Gb LUN at 1, and a 20Gb LUN at 2. LUN 0 is the Gateway itself. There is nothing at LUN 3->7. I had to enable the bios on the QLogic card to get this far. Without the bios enabled the card just timed out in the probe. Carl. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0006011252340.4914-100000>