Date: Tue, 19 Apr 2005 01:32:09 +0200 From: =?ISO-8859-1?Q?Lluis_L=F3pez?= <cronopiolopez@gmail.com> To: freebsd-multimedia@freebsd.org Subject: Re: PVR-150? Message-ID: <8f8eb53e0504181632449ee267@mail.gmail.com> In-Reply-To: <20050418031027.GA76818@bitsurf.net> References: <20050412064056.GA24914@bitsurf.net> <425C0F44.10407@elischer.org> <20050415033559.GA74522@bitsurf.net> <425F48F7.5000005@elischer.org> <20050418031027.GA76818@bitsurf.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On 4/18/05, Michael Haro <mharo@bitsurf.net> wrote: > I got the PVR150 card, but I could use a few pointers as to what to look > at to get it working with 5.4-rc2. >=20 > I installed the multimedia/pvr250 port and when I load the device, dmesg > reports the following: >=20 > cxm0: <Conexant iTVC16 MPEG Coder> mem 0xc8000000-0xcbffffff irq 10 at > device 13.0 on pci0 > cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on cxm0 > iicbb0: <I2C bit-banging driver> on cxm_iic0 > iicbus0: <Philips I2C bus> on iicbb0 master-only > cxm0: LG Innotek TAPC-H701F tuner > cxm0: could not initialize video decoder pvr150/500 have a cx25840 decoder chip, this isn't suported by cxm driver := ( (I think that the audio decoder is unsupported too). > cxm0@pci0:13:0: class=3D0x040000 card=3D0x80030070 chip=3D0x00164444 rev= =3D0x01 hdr=3D0x00 > vendor =3D 'Conexant Inc (Was: Globespan, ICompression Inc)' > device =3D 'iTVC16/CX23416 MPEG Codec' > class =3D multimedia > subclass =3D video >=20 > Any tips as to which files I need to modify, or how to figure what I need > to do to make this card work with the cxm driver? You can see the lastest unstable releases of ivtv driver (for linux). This releases have support for this decoder. You can see his code... Luis
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?8f8eb53e0504181632449ee267>