Date: Tue, 6 Mar 2001 05:46:21 -0500 From: "Otter" <otterr@telocity.com> To: "'Christopher Schulte'" <christopher@schulte.org>, "'Todd Punderson'" <tpunder@mediaone.net>, <stable@FreeBSD.ORG> Subject: RE: Problem with 4.2-STABLE and dc0 Message-ID: <001001c0a62a$af5ae1e0$1401a8c0@zoso> In-Reply-To: <5.0.2.1.0.20010306001037.00aecaf0@pop.schulte.org>
next in thread | previous in thread | raw e-mail | index | archive | help
no problems here... and my dc0 is also a NetGear FA310TX. see below
from last night's update:
> uname -a
FreeBSD kashmir.myip.org 4.3-BETA FreeBSD 4.3-BETA #3: Mon Mar 5
23:29:10 EST 2001
otterr@kashmir.myip.org:/usr/obj/usr/src/sys/kashmir i386
> ifconfig dc0
dc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.1.10 netmask 0xffffff00 broadcast 192.168.1.255
ether 00:a0:cc:65:da:4e
media: autoselect (100baseTX <full-duplex>) status: active
supported media: autoselect 100baseTX <full-duplex> 100baseTX
10baseT/UTP <full-duplex> 10baseT/UTP none
working just fine... dc0 is the internal NIC on my NAT box.
-Otter
> -----Original Message-----
> From: owner-freebsd-stable@FreeBSD.ORG
> [mailto:owner-freebsd-stable@FreeBSD.ORG]On Behalf Of Christopher
> Schulte
> Sent: Tuesday, March 06, 2001 1:16 AM
> To: Todd Punderson; stable@FreeBSD.ORG
> Subject: Re: Problem with 4.2-STABLE and dc0
>
>
> Same problem here, installworld and install installkernel just after
> freeze. Card is a Linksys LNE 100-TX.
>
> dc0: failed to force tx and rx to idle state
>
> Last CVSUP was December-ish, so that's not going to help any. ;p
>
> The card still works; I can login just fine and no apparent
> (as of yet)
> problems with throughput or such.
>
> At 01:09 AM 3/6/2001 -0500, Todd Punderson wrote:
> >I just cvsup'ed 11pm EST 3/5/01. After I heard that stable was
locked
> >thinking all would be well....Well, I now get this message
> repeated many
> >times:
> >
> >dc0: failed to force tx and rx to idle state
> >
> >The card is a Netgear FA310TX. It was fine before I did this
> update. The
> >last cvsup I ran was appx. 2 weeks ago (around 2/24.)
> Hopefully that will
> >let you pin down where the program crept in.
> >Thanks!
> >Todd
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-stable" in the body of the message
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001001c0a62a$af5ae1e0$1401a8c0>