Date: Wed, 23 Aug 2000 18:48:55 +0200 From: David Scialom <oscialom@club-internet.fr> To: freebsd-stable@freebsd.org Subject: UDMA66 not recognized Message-ID: <39A40077.49F228E0@club-internet.fr>
next in thread | raw e-mail | index | archive | help
I have also the problem that my FreeBSD does not recognize my Matrox
hard disk drive which is UDMA 66 and is connected to the first
controller with a 80 pin cable. FreeBSD use only the drive with the UDMA
33 mode ( see my dmesg output below).
It possible that the reason is that there is a second drive on the OTHER
controller which does not support UDMA 66 ?
Can someone help me?
David
------------------------------------------------------------------------
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
FreeBSD 4.0-RELEASE #0: Tue Aug 15 13:00:07 CEST 2000
root@lupo:/usr/src/sys/compile/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon (535.28-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x681 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR,XMM>
real memory = 67092480 (65520K bytes)
config> di sn0
config> di lnc0
config> di le0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> q
avail memory = 60948480 (59520K bytes)
Preloaded elf kernel "kernel" at 0xc03f0000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03f009c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device
1.0 on pci0
pci1: <PCI bus> on pcib2
isab0: <VIA 82C596B PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C596 ATA33 controller> port 0xd800-0xd80f at device
4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <VIA 83C572 USB controller> at 4.2 irq 5
pcm0: <AudioPCI ES1371> port 0xd000-0xd03f irq 10 at device 11.0 on
pci0
pci0: <S3 Trio graphics accelerator> at 12.0 irq 11
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 6MP> PJL,MLC,PCLXL,PCL,POSTSCRIPT
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
ad0: 9770MB <Maxtor 91021U2> [19852/16/63] at ata0-master using UDMA33
ad3: 3077MB <ST33232A> [6253/16/63] at ata1-slave using UDMA33
acd0: CDROM <ASUS CD-S500/A> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s2a
----------------------------------------------------------
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?39A40077.49F228E0>