Date: Mon, 19 Mar 2001 11:02:02 -0800 From: Soren Kristensen <soren@soekris.com> To: freebsd-net@FreeBSD.ORG Subject: Re: Moving ethernet cable between cards, ARP problem ? Message-ID: <3AB657AA.345BE49C@soekris.com> References: <3AB5D441.BA3C43B1@soekris.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Just a follow up with more information....
The status do change to active when I move the cable from one
interface to another, so there is physical connection.
Output from "ifconfig -a":
sis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.1.20 netmask 0xffffff00 broadcast
192.168.1.255
inet6 fe80::200:24ff:fec0:0%sis0 prefixlen 64 scopeid 0x1
ether 00:00:24:c0:00:00
media: autoselect (100baseTX) status: active
supported media: autoselect 100baseTX <full-duplex>
100baseTX 10baseT/UT
P <full-duplex> 10baseT/UTP none
sis1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.1.21 netmask 0xffffff00 broadcast
192.168.1.255
inet6 fe80::200:24ff:fec0:1%sis1 prefixlen 64 scopeid 0x2
ether 00:00:24:c0:00:01
media: autoselect (none) status: no carrier
supported media: autoselect 100baseTX <full-duplex>
100baseTX 10baseT/UT
P <full-duplex> 10baseT/UTP none
sis2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.1.22 netmask 0xffffff00 broadcast
192.168.1.255
inet6 fe80::200:24ff:fec0:2%sis2 prefixlen 64 scopeid 0x3
ether 00:00:24:c0:00:02
media: autoselect (none) status: no carrier
supported media: autoselect 100baseTX <full-duplex>
100baseTX 10baseT/UT
P <full-duplex> 10baseT/UTP none
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
faith0: flags=8000<MULTICAST> mtu 1500
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif1: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif2: flags=8010<POINTOPOINT,MULTICATT> mtu 1280
gif3: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0xa
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
Thanks,
Soren Kristensen
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-net" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3AB657AA.345BE49C>