Date: Mon, 29 Oct 2012 16:31:34 +0100 From: Monthadar Al Jaberi <monthadar@gmail.com> To: Andriy Gapon <avg@freebsd.org> Cc: freebsd-current <freebsd-current@freebsd.org>, Ryan Stone <rysto32@gmail.com> Subject: Re: Dtrace: Module is no longer loaded Message-ID: <CA%2BsBSo%2Bxxf4YO4vx=nmrMh6FZV=mTbJ3o1JYHFnEjWbtCRSwCw@mail.gmail.com> In-Reply-To: <508E98E1.7010502@FreeBSD.org> References: <CA%2BsBSoLWT=7dRC=BUo2tRXnvS%2BPuijWMP5%2BB=wD=jSGys37QBw@mail.gmail.com> <CAFMmRNyM_OUz6aAYWAhJKiFvZ0BVVnNvVT0cR_OmWJieXjU0yA@mail.gmail.com> <CA%2BsBSoKZszxXsaeieJu9BZ5SDKsB2YJ%2BrJiq7zDKpLAppm3DQA@mail.gmail.com> <508E98E1.7010502@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
-g is included in the base file "AR71XX_BASE" which I have not changed. The error message seems cryptic to me, which module it is talking about that is not loaded? Attaching base file: # # AR71XX -- Kernel configuration file for FreeBSD/MIPS for Atheros 71xx systems # # This includes all the common drivers for the AR71XX boards along with # the usb, net80211 and atheros driver code. # # $FreeBSD$ # machine mips mips ident AR71XX_BASE cpu CPU_MIPS4KC makeoptions KERNLOADADDR=0x80050000 options HZ=1000 options HWPMC_HOOKS files "../atheros/files.ar71xx" # For now, hints are per-board. hints "AR71XX_BASE.hints" makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols # Build these as modules so small platform builds will have the # modules already built. makeoptions MODULES_OVERRIDE="random gpio ar71xx if_gif if_gre if_bridge bridgestp usb wlan wlan_xauth wlan_acl wlan_wep wlan_tkip wlan_ccmp wlan_rssadapt wlan_amrr ath ath_pci" options DDB options KDB options SCHED_4BSD #4BSD scheduler options INET #InterNETworking options INET6 # IPv6 # options NFS_CL #Network Filesystem Client options PSEUDOFS #Pseudo-filesystem framework options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions # options NFS_LEGACYRPC # Debugging for use in -current options INVARIANTS options INVARIANT_SUPPORT options WITNESS options WITNESS_SKIPSPIN options DEBUG_REDZONE options DEBUG_MEMGUARD options FFS #Berkeley Fast Filesystem # options SOFTUPDATES #Enable FFS soft updates support # options UFS_ACL #Support for access control lists # options UFS_DIRHASH #Improve performance on big directories # options MSDOSFS # Read MSDOS filesystems; useful for USB/CF device pci device ar71xx_pci # 802.11 framework options IEEE80211_DEBUG options IEEE80211_ALQ options IEEE80211_SUPPORT_MESH # This option is currently broken for if_ath_tx. options IEEE80211_SUPPORT_TDMA options IEEE80211_AMPDU_AGE device wlan # 802.11 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_xauth # 802.11 hostap support device wlan_acl # 802.11 ACL support # Atheros wireless NICs device ath # Atheros interface support device ath_pci # Atheros PCI/Cardbus bus options ATH_DEBUG options ATH_DIAGAPI options ATH_ENABLE_11N options AH_DEBUG options AH_DEBUG_ALQ options ALQ device ath_hal option AH_SUPPORT_AR5416 device ath_rate_sample option AH_RXCFG_SDMAMW_4BYTES option AH_AR5416_INTERRUPT_MITIGATION # There's no DFS radar detection support yet so this won't actually # detect radars. It however does enable the rest of the channel change # machinery so DFS can be debugged. option ATH_ENABLE_DFS device mii device arge device usb options USB_EHCI_BIG_ENDIAN_DESC # handle big-endian byte order options USB_DEBUG options USB_HOST_ALIGN=32 # AR71XX (MIPS in general?) requires this device ehci device scbus device umass device da # On-board SPI flash device spibus device ar71xx_spi device mx25l device ar71xx_wdog device uart device loop device ether device md device bpf device random device if_bridge device gif # ip[46] in ip[46] tunneling protocol device gre # generic encapsulation - only for IPv4 in IPv4 though atm options ARGE_DEBUG # Enable if_arge debugging for now # Enable GPIO device gpio device gpioled On Mon, Oct 29, 2012 at 3:55 PM, Andriy Gapon <avg@freebsd.org> wrote: > on 29/10/2012 16:40 Monthadar Al Jaberi said the following: >> On Mon, Oct 29, 2012 at 2:10 PM, Ryan Stone <rysto32@gmail.com> wrote: >>> You didn't build with WITH_CTF=1 >> >> Yes I did, sorry forgot to attach kernel config. > > What about -g ? > http://wiki.freebsd.org/DTrace > >> # >> # Ubiquiti Routerstation Pro: boot from NFS >> # >> # $FreeBSD$ >> # >> >> include "AR71XX_BASE" >> ident "RSPRO_NFS" >> hints "RSPRO.hints" >> >> makeoptions MODULES_OVERRIDE+="opensolaris dtrace cyclic >> dtrace/dtnfsclient dtrace/dtnfscl dtrace/lockstat dtrace/profile" >> makeoptions WITH_CTF=1 >> options KDTRACE_HOOKS # all architectures - enable general DTrace hooks >> options DDB_CTF # all architectures - kernel ELF linker loads CTF data >> #options NFSCL #Network Filesystem Client >> >> >> # RTC - requires hackery in the spibus code to work >> device pcf2123_rtc >> >> # GEOM modules >> device geom_redboot # to get access to the SPI flash partitions >> device geom_uzip # compressed in-memory filesystem hackery! >> options GEOM_UZIP >> >> # Boot from NFS >> options NFSLOCKD #Network Lock Manager >> options NFSCLIENT #Network Filesystem Client >> options NFS_ROOT >> >> options BOOTP >> options BOOTP_NFSROOT >> options BOOTP_NFSV3 >> options BOOTP_WIRED_TO=arge0 >> options BOOTP_COMPAT >> options ROOTDEVNAME=\"nfs:172.16.1.101:/usr/obj/rspro/nfs\" >> >> > > > -- > Andriy Gapon -- Monthadar Al Jaberi
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CA%2BsBSo%2Bxxf4YO4vx=nmrMh6FZV=mTbJ3o1JYHFnEjWbtCRSwCw>