Date: Wed, 20 Feb 2002 11:00:45 -0800 From: "Jeremiah Gowdy" <data@dualcpus.com> To: <stable@freebsd.org> Subject: Panic in 4.4/4.5-STABLE Message-ID: <002501c1ba40$e6ed28e0$03e2cbd8@server>
next in thread | raw e-mail | index | archive | help
I am getting a panic while attempting to access an smbfs mounted resource.
It's part of a script that I used to execute with zero problems with my xl0
and fxp0, but it panics with my nge0.
Please cc me in any replies, I am not currently subscribed to stable.
panic: nge_jfree: freeing buffer of wrong size!
mp_lock=00000001 cpuid=0 lapic.id=01000000
boot() called on cpu0
Here is my ifconfig:
fxp0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
inet 10.0.0.1 netmask 0xffffff00 broadcast 10.0.0.255
ether 00:06:29:ee:13:48
media: Ethernet autoselect (none)
status: no carrier
xl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=3<rxcsum,txcsum>
ether 00:50:04:75:4a:37
media: Ethernet autoselect (10baseT/UTP)
status: active
nge0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 9000
options=3<rxcsum,txcsum>
inet 216.203.226.2 netmask 0xffffff80 broadcast 216.203.226.127
ether 00:40:f4:17:73:a5
media: Ethernet autoselect (1000baseTX <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
Here is my dmesg:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #1: Wed Jan 30 13:21:03 PST 2002
root@sherline.net:/usr/src/sys/compile/BRITNEY
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (499.15-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268423168 (262132K bytes)
avail memory = 257736704 (251696K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc034e000.
netsmb_dev: loaded
Pentium Pro MTRR support enabled
Using $PIR table, 11 entries at 0xc00f1ad0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
IOAPIC #0 intpin 18 -> irq 2
IOAPIC #0 intpin 19 -> irq 9
IOAPIC #0 intpin 17 -> irq 10
IOAPIC #0 intpin 16 -> irq 11
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva Vanta TNT2 graphics accelerator> at 0.0 irq 11
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x68e0-0x68ff mem
0xf6f00000-0xf6ffffff,0xf3ffd000-0xf3ffdfff irq 2 at device 2.0 on pci0
fxp0: Ethernet address 00:06:29:ee:13:48
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec aic7895 Ultra SCSI adapter> port 0x7000-0x70ff mem
0xf6efd000-0xf6efdfff irq 9 at device 3.0 on pci0
aic7895C: Ultra Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc1: <Adaptec aic7895 Ultra SCSI adapter> port 0x7400-0x74ff mem
0xf6efe000-0xf6efefff irq 9 at device 3.1 on pci0
aic7895C: Ultra Wide Channel B, SCSI Id=7, 32/255 SCBs
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfff0-0xffff at device 4.1 on
pci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 4.2 irq 9
Timecounter "PIIX" frequency 3579545 Hz
chip1: <Intel 82371AB Power management controller> port 0xfe00-0xfe0f at
device 4.3 on pci0
bktr0: <BrookTree 878> mem 0xf3ffe000-0xf3ffefff irq 10 at device 13.0 on
pci0
iicbb0: <I2C generic bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
smbus0: <System Management Bus> on bti2c0
bktr0: Hauppauge Model 44801 C110
bktr0: Hauppauge WinCast/TV, Philips NTSC tuner.
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 13.1 irq 10
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0x6c00-0x6c7f mem
0xf6efcf80-0xf6efcfff irq 2 at device 14.0 on pci0
xl0: Ethernet address: 00:50:04:75:4a:37
miibus1: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
nge0: <National Semiconductor Gigabit Ethernet> port 0x7800-0x78ff mem
0xf6eff000-0xf6efffff irq 11 at device 16.0 on pci0
nge0: Ethernet address: 00:40:f4:17:73:a5
miibus2: <MII bus> on nge0
nsgphy0: <DP83861 10/100/1000 media interface> on miibus2
nsgphy0: 1000baseTX-FDX, 1000baseTX, 100baseTX-FDX, 100baseTX, 10baseT-FDX,
10baseT, auto
orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd4fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcm0: <CS423x-PCI> at port 0x534-0x537,0x388-0x38b,0x220-0x22f irq 5 drq 1,0
on isa0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
IP packet filtering initialized, divert enabled, rule-based forwarding
enabled, default to accept, unlimited logging
BRIDGE 011031, have 3 interfaces
-- index 1 type 6 phy 0 addrl 6 addr 00.06.29.ee.13.48
-- index 2 type 6 phy 0 addrl 6 addr 00.50.04.75.4a.37
-- index 3 type 6 phy 0 addrl 6 addr 00.40.f4.17.73.a5
SMP: AP CPU #1 Launched!
acd0: CDROM <CRD-8400B> at ata1-master using PIO4
Waiting 2 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 1 lun 0
sa0: <CONNER CTT8000-S 1.22> Removable Sequential Access SCSI-2 device
sa0: 6.944MB/s transfers (6.944MHz, offset 15)
sa1 at ahc1 bus 0 target 6 lun 0
sa1: <Quantum DLT4000 D782> Removable Sequential Access SCSI-2 device
sa1: 10.000MB/s transfers (10.000MHz, offset 15)
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM-PSG DNES-309170W !# SAB0> Fixed Direct Access SCSI-3 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing
Enabled
da0: 8678MB (17774160 512 byte sectors: 255H 63S/T 1106C)
WARNING: / was not properly dismounted
>> now fxp0 promisc ON if_flags 0xffff8943 bdg_flags 0x5
>> now xl0 promisc ON if_flags 0xffff8943 bdg_flags 0x5
>> now nge0 promisc ON if_flags 0xffff8943 bdg_flags 0x5
nge0: gigabit link up
nge0: gigabit link up
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?002501c1ba40$e6ed28e0$03e2cbd8>