Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 2 Sep 2004 16:55:10 +0200
From:      Tijl Coosemans <tijl@ulyssis.org>
To:        freebsd-mobile@freebsd.org
Cc:        scott+freebsd@fishballoon.org
Subject:   Re: 5.3beta2 Xircom CEM56 attach returned 12
Message-ID:  <200409021655.10601.tijl@ulyssis.org>
In-Reply-To: <20040902120838.GA29503@llama.fishballoon.org>
References:  <200409011440.58934.tijl@ulyssis.org> <20040902120838.GA29503@llama.fishballoon.org>

next in thread | previous in thread | raw e-mail | index | archive | help

--Boundary-00=_ORzNBgRaVOZ0Gz0
Content-Type: text/plain;
  charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

Now hopefully with attachement.

On Thursday 02 September 2004 14:08, Scott Mitchell wrote:
> On Wed, Sep 01, 2004 at 02:40:58PM +0200, Tijl Coosemans wrote:
> > I'm having problems to get my Xircom card working. It doesn't
> > seem to be able to allocate mem. I think in 4-stable it used
> > 0xd1000. Anyway, I've set the syctl variabe hw.xe.debug to 2 and
> > included the output below.
> > There are a couple messages related to this in the archives, even
> > a patch, but the code has changed since then and it no longer
> > applies.
>
> I think all the patches that were floating around a while ago did
> finally get committed - could you send URLs so I can check I didn't
> miss anything?

http://lists.freebsd.org/pipermail/freebsd-mobile/2004-April/003570.html
But as far as I can understand the xe driver code, this is not the 
problem.

> In the meantime, could you also send me your /var/run/dmesg.boot?

oldcard dmesg attached.

thanks,
Tijl



--Boundary-00=_ORzNBgRaVOZ0Gz0
Content-Type: text/plain;
  charset="iso-8859-1";
  name="dmesg.old"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
	filename="dmesg.old"

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA2 #3: Thu Sep  2 10:47:00 CEST 2004
    root@kalimero.kotnet.org:/usr/obj/usr/src/sys/KALIMERO
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel.old/kernel" at 0xc0721000.
Calibrating clock(s) ... i8254 clock: 1193132 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 233288938 Hz
CPU: Pentium/P55C (quarter-micron) (233.29-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x581  Stepping = 1
  Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory  = 167903232 (160 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000826000 - 0x0000000009d1efff, 156209152 bytes (38137 pages)
avail memory = 158859264 (151 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f8e20
bios32: Entry = 0xfe95a (c00fe95a)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xd7d6
pnpbios: Found PnP BIOS data at 0xc00f8e30
pnpbios: Entry = f0000:9113  Rev = 1.0
pnpbios: Event flag at 510
pnpbios: OEM ID 9932f351
Other BIOS signatures found:
Intel Pentium detected, installing workaround for F00F bug
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80001850
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=06011179)
pcibios: BIOS version 2.10
Found $PIR table, 3 entries at 0xc00f8e80
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
embedded    0   11    A   0x01  3 4 5 6 7 9 10 11 12 14 15
embedded    0    2    A   0x01  3 4 5 6 7 9 10 11 12 14 15
embedded    0    2    B   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 1      0    6    A   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 1      0    6    B   0x01  3 4 5 6 7 9 10 11 12 14 15
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 3 Entries> on motherboard
$PIR: Links after initial probe:
Link  IRQ  Rtd  Ref  IRQs
 0x1  255   N     5  3 4 5 6 7 9 10 11 12 14 15
$PIR: Found matching pin for 0.11.INTA at func 0: 11
$PIR: Links after initial IRQ discovery:
Link  IRQ  Rtd  Ref  IRQs
 0x1   11   Y     5  3 4 5 6 7 9 10 11 12 14 15
$PIR: IRQs used by BIOS: 11
$PIR: Interrupt Weights:
[    0   1   2   3   4   5   6   7   8   9  10  11  12  13  14  15 ]
[    0   0   0   0   0   0   0   0   0   0   0   5   0   0   0   0 ]
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found->	vendor=0x1179, dev=0x0601, revid=0x2c
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2280, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 1, range 32, base fd000000, size 24, enabled
found->	vendor=0x102c, dev=0x00e5, revid=0xc6
	bus=0, slot=4, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0083, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 1, range 32, base fcfff000, size 12, enabled
$PIR: 0:11 INTA routed to irq 11
found->	vendor=0x1033, dev=0x0035, revid=0x01
	bus=0, slot=11, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x15 (5250 ns)
	intpin=a, irq=11
pci0: <display, VGA> at device 4.0 (no driver attached)
ohci0: <NEC uPD 9210 USB controller> mem 0xfcfff000-0xfcffffff irq 11 at device 11.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfcfff000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
cpu0 on motherboard
isa0: <ISA bus> on motherboard
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 21 devices, largest 195 bytes
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x100000-0xa01ffff, size=0x9f20000
PNP0c01: adding fixed memory32 range 0xa020000-0xa03ffff, size=0x20000
PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000
PNP0c01: adding fixed memory32 range 0xfefc0000-0xfeffffff, size=0x40000
pnpbios: handle 1 device ID PNP0c01 (010cd041)
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x81-0x83, size=0x3, align=0x1
PNP0200: adding io range 0x87-0x87, size=0x1, align=0x1
PNP0200: adding io range 0x89-0x8b, size=0x3, align=0x1
PNP0200: adding io range 0x8f-0x8f, size=0x1, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 2 device ID PNP0200 (0002d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 0x1
pnpbios: handle 4 device ID PNP0100 (0001d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 5 device ID PNP0800 (0008d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
pnpbios: handle 6 device ID PNP0c04 (040cd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 0x2
pnpbios: handle 7 device ID PNP0303 (0303d041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 8 device ID PNP0f13 (130fd041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
pnpbios: handle 9 device ID PNP0b00 (000bd041)
PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1
PNP0c02: adding io range 0x84-0x86, size=0x3, align=0x1
PNP0c02: adding io range 0x88-0x88, size=0x1, align=0x1
PNP0c02: adding io range 0x8c-0x8e, size=0x3, align=0x1
PNP0c02: adding io range 0xe0-0xef, size=0x10, align=0x1
PNP0c02: adding io range 0xb0-0xb2, size=0x3, align=0x1
PNP0c02: adding io range 0x24-0x25, size=0x2, align=0x1
PNP0c02: adding io range 0x2e-0x2f, size=0x2, align=0x1
PNP0c02: adding io range 0x1882-0x1885, size=0x4, align=0x1
PNP0c02: adding io range 0x1888-0x188d, size=0x6, align=0x1
PNP0c02: adding io range 0x480-0x48f, size=0x10, align=0x1
PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0x100-0x107, size=0x8, align=0x1
PNP0c02: adding io range 0x10e-0x10e, size=0x1, align=0x1
pnpbios: handle 10 device ID PNP0c02 (020cd041)
PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0x1
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
pnpbios: handle 11 device ID PNP0700 (0007d041)
PNP0600: adding io range 0x1f0-0x1f7, size=0x8, align=0x1
PNP0600: adding io range 0x3f6-0x3f6, size=0x1, align=0x1
PNP0600: adding irq mask 0x4000
pnpbios: handle 12 device ID PNP0600 (0006d041)
PNP0600: adding io range 0x170-0x177, size=0x8, align=0x1
PNP0600: adding io range 0x376-0x377, size=0x2, align=0x1
PNP0600: adding irq mask 0x8000
pnpbios: handle 13 device ID PNP0600 (0006d041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1
PNP0501: adding irq mask 0x10
pnpbios: handle 14 device ID PNP0501 (0105d041)
PNP0401: adding io range 0x378-0x37a, size=0x3, align=0x1
PNP0401: adding io range 0x778-0x77a, size=0x3, align=0x1
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x8
pnpbios: handle 16 device ID PNP0401 (0104d041)
pnpbios: handle 17 device ID PNP0a03 (030ad041)
PNP0e00: adding io range 0x3e0-0x3e1, size=0x2, align=0x1
pnpbios: handle 19 device ID PNP0e00 (000ed041)
pnpbios: handle 22 device ID TOS7009 (0970f351)
YMH0021: adding io range 0x220-0x22f, size=0x10, align=0x1
YMH0021: adding io range 0x530-0x537, size=0x8, align=0x1
YMH0021: adding io range 0x388-0x38b, size=0x4, align=0x1
YMH0021: adding io range 0x330-0x331, size=0x2, align=0x1
YMH0021: adding io range 0x370-0x371, size=0x2, align=0x1
YMH0021: adding irq mask 0x20
YMH0021: adding dma mask 0x2
YMH0021: adding dma mask 0x1
pnpbios: handle 23 device ID YMH0021 (2100a865)
YMH0022: adding io range 0x201-0x201, size=0x1, align=0x1
pnpbios: handle 32 device ID YMH0022 (2200a865)
PNP0e00: adding io range 0x3e2-0x3e3, size=0x2, align=0x1
pnpbios: handle 37 device ID PNP0e00 (000ed041)
sc: sc0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xc97ff on isa0
pmtimer0 on isa0
fdc0: <NEC 765 or clone> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
isa_probe_children: probing PnP devices
unknown: <PNP0800> failed to probe at port 0x61 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 irq 1 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> at irq 12 on isa0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0
ata0: <Generic ESDI/IDE/ATA controller> at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <Generic ESDI/IDE/ATA controller> at port 0x376-0x377,0x170-0x177 irq 15 on isa0
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1-slave:  stat=0x00 err=0x01 lsb=0x0f msb=0x0f
ata1: reset tp2 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0: <16550A-compatible COM port> at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
ppc0: using extended I/O port range
ppc0: ECP SPP SPP
ppc0: <ECP parallel printer port> at port 0x778-0x77a,0x378-0x37f irq 7 drq 3 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pcic0: <Intel i82365SL-A/B> at port 0x3e0-0x3e1 on isa0
pcic0: Polling mode
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pccard1: <PC Card 16-bit bus (classic)> on pcic0
unknown: <TOS7009> failed to probe on isa0
unknown: <YMH0021> failed to probe at port 0x370-0x371,0x330-0x331,0x388-0x38b,0x530-0x537,0x220-0x22f irq 5 drq 0,1 on isa0
unknown: <YMH0022> failed to probe at port 0x201 on isa0
pcic1: <Intel i82365SL-A/B> at port 0x3e2-0x3e3 on isa0
pcic1: Polling mode
pccard2: <PC Card 16-bit bus (classic)> on pcic1
pccard3: <PC Card 16-bit bus (classic)> on pcic1
Device configuration finished.
procfs registered
TSC timecounter disabled: APM enabled.
Timecounter "TSC" frequency 233288938 Hz quality -1000
Timecounters tick every 10.000 msec
lo0: bpf attached
ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ad0: <TOSHIBA MK4006MAV/F2.03 A> ATA-0 disk at ata0-master
ad0: 3909MB (8007552 sectors), 7944 C, 16 H, 63 S, 512 B
ad0: 1 secs/int, 1 depth queue, PIO4
GEOM: new disk ad0
ata1-master: pio=0x0b wdma=0x21 udma=0xffffffff cable=40pin
ATAPI_RESET time = 20us
acd0: <TOSHIBA CD-ROM XM-1502BS/1012> CDROM drive at ata1 as master
acd0: read 1722KB/s (1722KB/s), 128KB buffer, PIO3
acd0: Reads: CDR, CDDA
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:8007489
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 4099834368 end 4099866623
GEOM: Configure ad0s1a, start 0 length 134217728 end 134217727
GEOM: Configure ad0s1b, start 134217728 length 201326592 end 335544319
GEOM: Configure ad0s1c, start 0 length 4099834368 end 4099834367
GEOM: Configure ad0s1d, start 335544320 length 134217728 end 469762047
GEOM: Configure ad0s1e, start 469762048 length 3630072320 end 4099834367
pcic0: Power: Vcc=0 Vpp=0
pcic0: Power applied
Power complete.
pcic0: Power: Vcc=-1 Vpp=-1
pcic0: Couldn't autodetect voltage, assuming 5.0V
pcic0: Power applied
pcic0: Output enabled
pcic0: Settling complete
Power complete.
pccard: card inserted, slot 0
pcic0: reset 1 int is 0 stat is ff
Mounting root from ufs:/dev/ad0s1a
pcic0: reset 2 int is 60 stat is cf
start_init: trying /sbin/init
pcic0: reset 3 int is 60 stat is ef
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pcic: mem addr 0xd0000: reg 48: d0 0 d0 0 0 7f 30
pcic: mem addr 0: reg 48: 0 0 0 0 0 0 20
pccard0: Assigning xe0: io 0x2e8-0x2ef irq 10 flags 0x0
xe0: pccard_probe
xe0: vendor = 0x0105
xe0: product = 0x110a
xe0: prodext = 0x46
xe0: vendor_str = Xircom
xe0: product_str = CreditCard Ethernet 10/100 + Modem 56
xe0: cis3_str = CEM56
xe0: cis4_str = 1.00
xe0: <Xircom RealPort Ethernet 10/100 + Modem 56> at port 0x2e8-0x2ef irq 10 slot 0 on pccard0
xe0: pccard_attach
xe0: activate
xe0: Finding an aligned port for RealPort
pcic: I/O win 1 flags 17 10f-11e
pcic: I/O win 1 flags 7 10f-11e
xe0: RealPort port 0x10f, size 0x10
xe0: Cannot allocate ioport
device_attach: xe0 attach returned 12
Linux ELF exec handler installed

--Boundary-00=_ORzNBgRaVOZ0Gz0--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200409021655.10601.tijl>