Date: Mon, 29 Jan 2007 17:44:52 +0100 (CET) From: "Kirill Ponazdyr" <lists@codeangels.com> To: freebsd-hardware@freebsd.org Subject: Dell 128T (HP 2/20) library on FCAL problem Message-ID: <4841.195.162.161.47.1170089092.squirrel@www.codeangels.com>
next in thread | raw e-mail | index | archive | help
Hi, I have a problem control our Dell 128T (HP 2/20) library connected via Fibrechannel to FreeBSD host. The LUNs seem to be visible but problem is that library controller is reported as "Fixed Storage Array SCSI-0 device": sa0 at isp0 bus 0 target 129 lun 0 sa0: <HP Ultrium 1-SCSI E32L> Removable Sequential Access SCSI-3 device sa0: 100.000MB/s transfers pass1 at isp0 bus 0 target 129 lun 1 pass1: <HP C7200 FC Interface 009t> Fixed Storage Array SCSI-0 device pass1: 100.000MB/s transfers root@backup:~# camcontrol inquiry pass1 pass1: <HP C7200 FC Interface 009t> Fixed Storage Array SCSI-0 device pass1: Serial Number A00PA7 pass1: 100.000MB/s transfers , Tagged Queueing Enabled The mtx fails on pass1, chio as well: root@backup:~# chio -f /dev/pass1 status chio: /dev/pass1: CHIOGPARAMS: Inappropriate ioctl for device It seems as if the problem is actually on the Library side as it is recognized as array in linux as well, is there any way to force this LUN to be recognized as changer device despite of it claiming to be an array? Does anyone have a 128T / HP2/20 working under BSD? Cheers Kirill
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4841.195.162.161.47.1170089092.squirrel>