Date: Sun, 29 Jan 2006 05:22:15 +0000 From: "Jr Porkchop" <jrporkchop@hotmail.com> To: freebsd-multimedia@freebsd.org Subject: Sound Blaster Live! External: Would like some help please Message-ID: <BAY102-F1671969B231C57A40C68C5C5160@phx.gbl>
next in thread | raw e-mail | index | archive | help
Hello,
I was wondering if anyone has had success with the 'Sound Blaster
Live! 24-bit External' USB Audio card, I have managed to get it initialising
but i can't get it to produce sound. I have produced a custom kernel with
Ariff Abdullah's patch for RELEASE 6.0 to the /usr/src and used:
device sound # Loads generic sound for headers
device snd_uaudio # Loads USB audio
in the kernel config.
The model number is SB0490. I also run KDE 3.4 if that could be also
causing a problem.
Here is some debug stuff as I have been reading a lot in this forum and is
always asked for;
uname -a:
FreeBSD lees.resnet.gre.ac.uk 6.0-RELEASE FreeBSD 6.0-RELEASE #0: Sun Jan 29
03:50:23 GMT 2006 root@lees.resnet.gre.ac.uk:/usr/obj/usr/src/sys/SBLE
i386
dmesgs:
uaudio0: Creative Technology SB Live! 24-bit External, rev 1.10/1.00, addr 2
uaudio0: audio rev 1.00
pcm0: <USB Audio> on uaudio0
cat /dev/sndstat:
FreeBSD Audio Driver (newpcm)
Installed devices:
pcm0: <USB Audio> at ? (1p/1r/0v channels duplex default)
mode 1:(output) 2ch, 16/16bit, pcm, 44100Hz
mode 2:(output) 2ch, 24/24bit, pcm, 44100Hz
mode 3:(output) 4ch, 16/16bit, pcm, 44100Hz
mode 4:(output) 4ch, 24/24bit, pcm, 44100Hz
mode 5:(output) 6ch, 16/16bit, pcm, 44100Hz
mode 6:(output) 6ch, 24/24bit, pcm, 44100Hz
mode 7:(output) 2ch, 16/16bit, pcm, 48000Hz
mode 8:(output) 2ch, 24/24bit, pcm, 48000Hz
mode 9:(output) 4ch, 16/16bit, pcm, 48000Hz
mode 10:(output) 4ch, 24/24bit, pcm, 48000Hz
mode 11:(output) 6ch, 16/16bit, pcm, 48000Hz
mode 12:(output) 6ch, 24/24bit, pcm, 48000Hz
mode 13:(output) 2ch, 16/16bit, pcm, 96000Hz
mode 14:(output) 2ch, 24/24bit, pcm, 96000Hz
mode 1:(input) 2ch, 16/16bit, pcm, 44100Hz
mode 2:(input) 2ch, 24/24bit, pcm, 44100Hz
mode 3:(input) 2ch, 16/16bit, pcm, 48000Hz
mode 4:(input) 2ch, 24/24bit, pcm, 48000Hz
mode 5:(input) 2ch, 16/16bit, pcm, 96000Hz
mode 6:(input) 2ch, 24/24bit, pcm, 96000Hz
usbdevs -v:
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
VIA(0x0000), rev 1.00
port 1 addr 2: full speed, power 308 mA, config 1, SB Live! 24-bit
External(0x3040), Creative Technology(0x041e), rev 1.00
port 2 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
VIA(0x0000), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb2:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
VIA(0x0000), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x0000), rev 1.00
port 1 addr 2: low speed, power 100 mA, config 1, Microsoft 3-Button Mouse
with IntelliEye(TM)(0x0040), Microsoft(0x045e), rev 3.00
port 2 powered
Any thing else needed for helping you diagnose my problem I am happy to do
but I'm new Unix and I'm just looking for help.
Christopher Lees
University E-mail : lc423@gre.ac.uk (if nobody likes sending to hotmail)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BAY102-F1671969B231C57A40C68C5C5160>