Date: Mon, 31 Jul 2006 00:33:58 +0200 From: Ed Schouten <ed@fxq.nl> To: FreeBSD ACPI <freebsd-acpi@freebsd.org>, FreeBSD Stable <freebsd-stable@freebsd.org> Subject: Odd PCI and ACPI messages on 'INSYDE RSDT_000' laptop Message-ID: <20060730223358.GN48334@hoeg.nl>
next in thread | raw e-mail | index | archive | help
--wAI/bQb0EMvlZCHl Content-Type: multipart/mixed; boundary="hTKW8p8tUZ/8vLMe" Content-Disposition: inline --hTKW8p8tUZ/8vLMe Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hello, Last week I got a laptop from a few friends of mine with a broken screen. I removed the screen from the device and connected a regular CRT to it to install FreeBSD 6.1 on it for serving as a jukebox (silent, doesn't consume too much power). I first tried FreeSBIE 1.1, which just deadlocked during the bootsplash. After that I downloaded a FreeBSD 6.1 CD. When I boot FreeBSD 6.1 without the ACPI kernel module, it panics (fatal trap 12) right after probing uhci0. When I boot with ACPI, it boots like it should. Because the laptop doesn't have a serial connector, I didn't copy the kernel backtrace. If it is really needed, I'll boot the CD once again and type over the screen contents. Anyway, I installed FreeBSD 6.1 on it, with the ACPI module loaded, but I still get some really strange messages in my dmesg I thought would be useful to mention: | ... | cpu0: <ACPI CPU> on acpi0 | acpi_perf0: <ACPI CPU Frequency Control> on cpu0 | acpi_perf0: failed in PERF_STATUS attach | device_attach: acpi_perf0 attach returned 6 | ... | acpi_perf0: <ACPI CPU Frequency Control> on cpu0 | acpi_perf0: failed in PERF_STATUS attach | device_attach: acpi_perf0 attach returned 6 | ... And these: | ... | pci_link0: BIOS IRQ 11 for 0.2.INTA is invalid | pci_link1: BIOS IRQ 5 for 0.31.INTB is invalid | ... | pci_link4: BIOS IRQ 11 for 1.0.INTA is invalid | pci_link5: BIOS IRQ 11 for 1.1.INTA is invalid | ... The device Just Works at the moment, so I can live with it, but I was wondering if these messages do any harm. I've attached the entire dmesg of the device for those who are interested. Yours, --=20 Ed Schouten <ed@fxq.nl> WWW: http://g-rave.nl/ --hTKW8p8tUZ/8vLMe Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.txt" Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-STABLE #0: Thu Jul 27 15:07:26 CEST 2006 root@kiebort.fxq.nl:/usr/obj/usr/src/sys/KIEBORT Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) M processor 1500MHz (1498.73-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x695 Stepping = 5 Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE> Features2=0x180<EST,TM2> real memory = 520028160 (495 MB) avail memory = 503705600 (480 MB) acpi0: <INSYDE RSDT_000> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_perf0: <ACPI CPU Frequency Control> on cpu0 acpi_perf0: failed in PERF_STATUS attach device_attach: acpi_perf0 attach returned 6 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_perf0: <ACPI CPU Frequency Control> on cpu0 acpi_perf0: failed in PERF_STATUS attach device_attach: acpi_perf0 attach returned 6 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci_link0: BIOS IRQ 11 for 0.2.INTA is invalid pci_link1: BIOS IRQ 5 for 0.31.INTB is invalid pci0: <ACPI PCI bus> on pcib0 pci0: <base peripheral> at device 0.1 (no driver attached) pci0: <base peripheral> at device 0.3 (no driver attached) pci0: <display, VGA> at device 2.0 (no driver attached) pci0: <display> at device 2.1 (no driver attached) pci0: <serial bus, USB> at device 29.0 (no driver attached) pci0: <serial bus, USB> at device 29.1 (no driver attached) pci0: <serial bus, USB> at device 29.2 (no driver attached) pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci_link4: BIOS IRQ 11 for 1.0.INTA is invalid pci_link5: BIOS IRQ 11 for 1.1.INTA is invalid pci1: <ACPI PCI bus> on pcib1 pci1: <serial bus, FireWire> at device 0.0 (no driver attached) rl0: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem 0xe0000000-0xe00000ff irq 9 at device 1.0 on pci1 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:02:3f:12:cd:5a pci1: <bridge, PCI-CardBus> at device 4.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1100-0x110f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pcm0: <Intel ICH4 (82801DB)> port 0xe100-0xe1ff,0xe200-0xe23f mem 0xf0080400-0xf00805ff,0xf0080600-0xf00806ff irq 9 at device 31.5 on pci0 pcm0: <Avance Logic ALC202 AC97 Codec> pci0: <simple comms, generic modem> at device 31.6 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd0: [GIANT-LOCKED] acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 orm0: <ISA Option ROMs> at iomem 0xe0000-0xe17ff,0xe6000-0xe6fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 1498733692 Hz quality 800 Timecounters tick every 1.000 msec ad0: DMA limited to UDMA33, controller found non-ATA66 cable ad0: 38154MB <TOSHIBA MK4025GAS KA100A> at ata0-master UDMA33 acd0: DVDR <TOSHIBA DVD-ROM SD-R6112/1031> at ata1-master UDMA33 Trying to mount root from ufs:/dev/ad0s1a --hTKW8p8tUZ/8vLMe-- --wAI/bQb0EMvlZCHl Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.4 (FreeBSD) iD8DBQFEzTPW52SDGA2eCwURAoNwAJ9zvdTWRJiAH7pxBw76mfWbVSmIjwCfQksA Kmo8nd6Fvk4RJ0YdU9zZvM8= =FmPh -----END PGP SIGNATURE----- --wAI/bQb0EMvlZCHl--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060730223358.GN48334>