Date: Thu, 9 Apr 2015 10:00:40 +0300 From: "Sergey V. Dyatko" <sergey.dyatko@gmail.com> To: Rui Paulo <rpaulo@me.com> Cc: FreeBSD-Current <freebsd-current@freebsd.org> Subject: Re: Call For Testers: Synaptics touchpads Message-ID: <20150409100040.22093546@laptop.minsk.domain> In-Reply-To: <3270374.XyG30qCihb@akita> References: <1849381.HnoQVUIgNM@akita> <20150409091052.63d44c77@laptop.minsk.domain> <3270374.XyG30qCihb@akita>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 08 Apr 2015 23:27:28 -0700
Rui Paulo <rpaulo@me.com> wrote:
> On Thursday 09 April 2015 09:10:52 Sergey V. Dyatko wrote:
> > On Wed, 08 Apr 2015 00:19:45 -0700
> >
> > Rui Paulo <rpaulo@me.com> wrote:
> > > Hi,
> > >
> > > The attached patch adds support for newer touchpad features and implements
> > > two finger scrolling. This is such a common feature these days that I
> > > think we should enable it by default and disable edge scrolling. I've
> > > implemented some detection code to keep edge scrolling enabled when the
> > > touchpad has a dedicated area for scrolling.
> > >
> > > Please test it and report back your experience. To enable synaptics
> > > support, you need:
> > >
> > > hw.psm.synaptics_support=1
> > >
> > > in loader.conf.
> > >
> > > Thanks,
> >
> > Patch applied successfully (head, r280980).
> >
> > with and without hw.psm.synaptics_support=1 I have
> >
> > [tiger@laptop]:~>synclient
> > Couldn't find synaptics properties. No synaptics driver loaded?
>
> This isn't the xorg driver, so you can't use it.
>
> >
> > and mouse cursor moved soooo slooowly,
>
> Is this a new problem with this patch? You can adjust the speed in xorg.
>
> > without hw.psm.synaptics_support it
> > moved faster, vertical scrolling doesn't work in both cases
>
> Ok, I just wanted to make sure there are no regressions. I don't have your
> model, so it's hard to help you.
>
Now I revert patch, results:
booting w/o hw.psm.synaptics_support=1
* vscroll doesn't work
* buttons works fine
* mouse cursor moved slow (~ like without synaptics_support + your patch)
booting with synaptics_support enabled:
* vscroll works fine
* buttons doesn't work
* mouse cursor moved ok (fast)
* synclient works fine two figers too, after `synclient
VertTwoFingerScroll=1`
So, it general, there is no large regression if I can adjust the speed in xorg
(now?). Just in case, I have following on xorg.conf:
Section "InputDevice"
Identifier "Mouse0"
Driver "synaptics"
Option "Protocol" "psm"
Option "Device" "/dev/psm0"
# Option "SHMConfig" "on"
Option "LBCornerButton" "1"
Option "RBCornerButton" "2"
Option "MinSpeed" "7"
Option "MaxSpeed" "9"
Option "AccelFactor" "0.0015"
Option "ZAxisMapping" "4 5 6 7"
EndSection
I would be grateful if you (or somebody else) told me how I can fix vscroll
with your patch
Thanks!
--
wbr, tiger
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20150409100040.22093546>