Date: Tue, 13 May 2008 15:34:32 -0400 From: Kurt Rosenfeld <hardware@ee.ccny.cuny.edu> To: freebsd-multimedia@freebsd.org Cc: WATANABE Kazuhiro <CQG00620@nifty.ne.jp> Subject: Re: snd_csa driver problem in 7.0-RELEASE on IBM T20 Message-ID: <20080513193431.GA8416@eesfc24.engr.ccny.cuny.edu> In-Reply-To: <20080513113614.27E3D5C0C7@mail.asahi-net.or.jp> References: <20080511014926.GB7610@eesfc24.engr.ccny.cuny.edu> <20080513113614.27E3D5C0C7@mail.asahi-net.or.jp>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, May 13, 2008 at 08:36:13PM +0900, WATANABE Kazuhiro wrote: > Hi. > > At Sat, 10 May 2008 21:49:26 -0400, > Kurt Rosenfeld wrote: > > Hello, > > > > I'm running 7.0-RELEASE with the GENERIC kernel. The sound > > chip in my IBM T20 laptop uses the snd_csa driver. When I > > kldload the snd_csa driver, this is written to the system > > log: > > > > csa0: <CS4280/CS4614/CS4622/CS4624/CS4630> mem 0xe8100000-0xe8100fff,0xe8000000-0xe80fffff irq 11 at device 5.0 on pci0 > > csa: card is Thinkpad 600X/A20/T20 > > csa0: [GIANT-LOCKED] > > csa0: [ITHREAD] > > device_attach: csa0 attach returned 6 > > > > and there is no /dev/dsp* driver. kldstat gives > > this: > > > > $ kldstat > > Id Refs Address Size Name > > 1 9 0xc0400000 906518 kernel > > 2 1 0xc0d07000 6a32c acpi.ko > > 3 1 0xc23f8000 22000 linux.ko > > 4 1 0xc27a5000 7000 snd_csa.ko > > 5 2 0xc27ac000 3f000 sound.ko > > > > I tested it on two T20 laptops with the same result. > > It works under Linux. Any idea what the problem > > might be? thanks, -kurt > > > > Here is the complete dmesg output: > > > > Copyright (c) 1992-2008 The FreeBSD Project. > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > > The Regents of the University of California. All rights reserved. > > FreeBSD is a registered trademark of The FreeBSD Foundation. > > FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC 2008 > > root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC > > Timecounter "i8254" frequency 1193182 Hz quality 0 > > CPU: Intel Pentium III (189.32-MHz 686-class CPU) > > Origin = "GenuineIntel" Id = 0x683 Stepping = 3 > > Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> > > real memory = 268369920 (255 MB) > > avail memory = 248623104 (237 MB) > > kbd1 at kbdmux0 > > ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) > > hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 19:59:27) > > acpi0: <PTLTD RSDT> on motherboard > > acpi0: [ITHREAD] > > acpi0: Power Button (fixed) > > acpi0: reservation of 0, a0000 (3) failed > > acpi0: reservation of 100000, ff00000 (3) failed > > Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 > > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 > > acpi_ec0: <Embedded Controller: GPE 0x9, GLK> port 0x62,0x66 on acpi0 > > cpu0: <ACPI CPU> on acpi0 > > acpi_throttle0: <ACPI CPU Throttling> on cpu0 > > acpi_lid0: <Control Method Lid Switch> on acpi0 > > acpi_button0: <Sleep Button> on acpi0 > > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > > pci0: <ACPI PCI bus> on pcib0 > > agp0: <Intel 82443BX (440 BX) host to PCI bridge> on hostb0 > > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 > > pci1: <ACPI PCI bus> on pcib1 > > vgapci0: <VGA-compatible display> mem 0xf0000000-0xf7ffffff irq 11 at device 0.0 on pci1 > > cbb0: <TI1450 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 2.0 on pci0 > > cardbus0: <CardBus bus> on cbb0 > > pccard0: <16-bit PCCard bus> on cbb0 > > cbb0: [ITHREAD] > > cbb1: <TI1450 PCI-CardBus Bridge> mem 0x50100000-0x50100fff irq 11 at device 2.1 on pci0 > > cardbus1: <CardBus bus> on cbb1 > > pccard1: <16-bit PCCard bus> on cbb1 > > cbb1: [ITHREAD] > > pci0: <multimedia, audio> at device 5.0 (no driver attached) > > isab0: <PCI-ISA bridge> at device 7.0 on pci0 > > isa0: <ISA bus> on isab0 > > atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1800-0x180f at device 7.1 on pci0 > > ata0: <ATA channel 0> on atapci0 > > ata0: [ITHREAD] > > ata1: <ATA channel 1> on atapci0 > > ata1: [ITHREAD] > > uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1820-0x183f irq 11 at device 7.2 on pci0 > > uhci0: [GIANT-LOCKED] > > uhci0: [ITHREAD] > > usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 > > usb0: USB revision 1.0 > > uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 > > uhub0: 2 ports with 2 removable, self powered > > pci0: <bridge> at device 7.3 (no driver attached) > > acpi_tz0: <Thermal Zone> on acpi0 > > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > > kbd0 at atkbd0 > > atkbd0: [GIANT-LOCKED] > > atkbd0: [ITHREAD] > > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > > psm0: [GIANT-LOCKED] > > psm0: [ITHREAD] > > psm0: model Generic PS/2 mouse, device ID 0 > > fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 > > fdc0: [FILTER] > > sio0: configured irq 4 not in bitmap of probed irqs 0 > > sio0: port may not be enabled > > battery0: <ACPI Control Method Battery> on acpi0 > > acpi_acad0: <AC Adapter> on acpi0 > > sio0: configured irq 4 not in bitmap of probed irqs 0 > > sio0: port may not be enabled > > pmtimer0 on isa0 > > orm0: <ISA Option ROMs> at iomem 0xc0000-0xcbfff,0xe0000-0xeffff pnpid ORM0000 on isa0 > > ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0 > > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > > ppbus0: <Parallel port bus> on ppc0 > > ppbus0: [ITHREAD] > > plip0: <PLIP network interface> on ppbus0 > > lpt0: <Printer> on ppbus0 > > lpt0: Interrupt-driven port > > ppi0: <Parallel I/O> on ppbus0 > > ppc0: [GIANT-LOCKED] > > ppc0: [ITHREAD] > > sc0: <System console> at flags 0x100 on isa0 > > sc0: VGA <16 virtual consoles, flags=0x300> > > sio0: configured irq 4 not in bitmap of probed irqs 0 > > sio0: port may not be enabled > > sio0: configured irq 4 not in bitmap of probed irqs 0 > > sio0: port may not be enabled > > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > > sio0: type 8250 or not responding > > sio0: [FILTER] > > sio1: configured irq 3 not in bitmap of probed irqs 0 > > sio1: port may not be enabled > > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > > Timecounter "TSC" frequency 189322216 Hz quality 800 > > Timecounters tick every 1.000 msec > > hptrr: no controller detected. > > wi0: <Lucent Technologies WaveLAN/IEEE> at port 0x100-0x13f irq 11 function 0 config 1 on pccard1 > > wi0: [ITHREAD] > > wi0: using Lucent Technologies, WaveLAN/IEEE > > wi0: Lucent Firmware: Station (8.10.1) > > wi0: Ethernet address: 00:02:2d:1f:c0:24 > > ad0: 19077MB <IBM DJSA-220 JS4IAC6A> at ata0-master UDMA33 > > acd0: CDRW <DW-28E/2.1A> at ata1-master UDMA33 > > Trying to mount root from ufs:/dev/ad0s1a > > wi0: link state changed to DOWN > > csa0: <CS4280/CS4614/CS4622/CS4624/CS4630> mem 0xe8100000-0xe8100fff,0xe8000000-0xe80fffff irq 11 at device 5.0 on pci0 > > csa: card is Thinkpad 600X/A20/T20 > > csa0: [GIANT-LOCKED] > > csa0: [ITHREAD] > > device_attach: csa0 attach returned 6 > > How about this (modify DELAY() values)? > > Thinkpad T23 Setup (part 1) > http://docs.freebsd.org/cgi/getmsg.cgi?fetch=135463+0+archive/2002/freebsd-mobile/20020519.freebsd-mobile > > --- > WATANABE Kazuhiro (CQG00620@nifty.ne.jp) Thanks for your response. Since posting, I noticed that the soundcard works when ACPI is disabled at the startup menu. Is this a useful clue? -kurt
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20080513193431.GA8416>