Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 25 Jun 2018 22:50:00 +0800 (CST)
From:      kelly <kelly@rsw-power.com>
To:        freebsd-net@freebsd.org
Subject:   Re: Handheld Inkjet Printer with 3.5 Inch Touch Screen
Message-ID:  <258e76fb.130ea.1643637345e.Coremail.kelly@rsw-power.com>

next in thread | raw e-mail | index | archive | help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From owner-freebsd-net@freebsd.org  Mon Jun 25 15:00:17 2018
Return-Path: <owner-freebsd-net@freebsd.org>
Delivered-To: freebsd-net@mailman.ysv.freebsd.org
Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1])
 by mailman.ysv.freebsd.org (Postfix) with ESMTP id 820FC1012765
 for <freebsd-net@mailman.ysv.freebsd.org>;
 Mon, 25 Jun 2018 15:00:17 +0000 (UTC) (envelope-from gjb@FreeBSD.org)
Received: from freefall.freebsd.org (freefall.freebsd.org
 [IPv6:2610:1c1:1:6074::16:84])
 (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits))
 (Client CN "freefall.freebsd.org",
 Issuer "Let's Encrypt Authority X3" (verified OK))
 by mx1.freebsd.org (Postfix) with ESMTPS id 38E53804C1;
 Mon, 25 Jun 2018 15:00:17 +0000 (UTC) (envelope-from gjb@FreeBSD.org)
Received: from FreeBSD.org (freefall.freebsd.org [IPv6:2610:1c1:1:6074::16:84])
 (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits))
 (Client did not present a certificate)
 by freefall.freebsd.org (Postfix) with ESMTPS id E2CF615B65;
 Mon, 25 Jun 2018 15:00:16 +0000 (UTC) (envelope-from gjb@FreeBSD.org)
Date: Mon, 25 Jun 2018 15:00:15 +0000
From: Glen Barber <gjb@FreeBSD.org>
To: "Rodney W. Grimes" <freebsd-rwg@pdx.rh.CN85.dnsmgr.net>
Cc: Grzegorz Junka <list1@gjunka.com>, freebsd-net@freebsd.org
Subject: Re: Killer E2500 network driver
Message-ID: <20180625150015.GC51569@FreeBSD.org>
References: <d80c6445-a2d8-d04e-de56-9b3ee5d605a8@gjunka.com>
 <201806251431.w5PEVrZl098861@pdx.rh.CN85.dnsmgr.net>
MIME-Version: 1.0
Content-Type: multipart/signed; micalg=pgp-sha256;
 protocol="application/pgp-signature"; boundary="FsscpQKzF/jJk6ya"
Content-Disposition: inline
In-Reply-To: <201806251431.w5PEVrZl098861@pdx.rh.CN85.dnsmgr.net>
User-Agent: Mutt/1.9.1 (2017-09-22)
X-BeenThere: freebsd-net@freebsd.org
X-Mailman-Version: 2.1.26
Precedence: list
List-Id: Networking and TCP/IP with FreeBSD <freebsd-net.freebsd.org>
List-Unsubscribe: <https://lists.freebsd.org/mailman/options/freebsd-net>,
 <mailto:freebsd-net-request@freebsd.org?subject=unsubscribe>
List-Archive: <http://lists.freebsd.org/pipermail/freebsd-net/>;
List-Post: <mailto:freebsd-net@freebsd.org>
List-Help: <mailto:freebsd-net-request@freebsd.org?subject=help>
List-Subscribe: <https://lists.freebsd.org/mailman/listinfo/freebsd-net>,
 <mailto:freebsd-net-request@freebsd.org?subject=subscribe>
X-List-Received-Date: Mon, 25 Jun 2018 15:00:17 -0000


--FsscpQKzF/jJk6ya
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

On Mon, Jun 25, 2018 at 07:31:53AM -0700, Rodney W. Grimes wrote:
> > On 24/06/2018 22:29, Rodney W. Grimes wrote:
> > >> On 24/06/2018 17:16, Rodney W. Grimes wrote:
> > >>>> Hi All,
> > >>>>
> > >>>> This list states that 10-Stable supports Killer E2500 Gigabit Ethe=
rnet
> > >>>> controller:
> > >>>>
> > >>>> https://www.freebsd.org/relnotes/10-STABLE/hardware/support.html
> > >>>>
> > >>>> However, similar list for 11-Stable doesn't list that driver:
> > >>>>
> > >>>> https://www.freebsd.org/relnotes/11-STABLE/hardware/support.html
> > >>>>
> > >>>> Does it mean that the driver has been removed, and if yes then why?
> > >>> I believe it was a "added" feature in 10 stable, my 11 stable
> > >>> alc(4) man page lists the E2500 as supported.
> > >>>
> > >>>        The alc device driver provides support for the following Eth=
ernet
> > >>>        controllers:
> > >>>
> > >>>        o   Atheros AR8131 PCI Express Gigabit Ethernet controller
> > >>>        o   Atheros AR8132 PCI Express Fast Ethernet controller
> > >>>        o   Atheros AR8151 v1.0 PCI Express Gigabit Ethernet control=
ler
> > >>>        o   Atheros AR8151 v2.0 PCI Express Gigabit Ethernet control=
ler
> > >>>        o   Atheros AR8152 v1.1 PCI Express Fast Ethernet controller
> > >>>        o   Atheros AR8152 v2.0 PCI Express Fast Ethernet controller
> > >>>        o   Atheros AR8161 PCI Express Gigabit Ethernet controller
> > >>>        o   Atheros AR8162 PCI Express Fast Ethernet controller
> > >>>        o   Atheros AR8171 PCI Express Gigabit Ethernet controller
> > >>>        o   Atheros AR8172 PCI Express Fast Ethernet controller
> > >>>        o   Killer E2200 Gigabit Ethernet controller
> > >>>        o   Killer E2400 Gigabit Ethernet controller
> > >>>        o   Killer E2500 Gigabit Ethernet controller
> > >>>
> > >> Yeah, listing drivers in alc shows support for that card. But the wh=
ole
> > >> alc driver isn't listed on the hardware support page for 11-Stable. =
So
> > >> wanted to check if it's an omission or it was removed deliberately.
> > > Which page are you looking at, it needs fixed.
> > >
> > > @x230a:/ # ls -lag /boot/kernel/if_alc.ko
> > > -r-xr-xr-x  1 root  wheel  84912 Jul 21  2017 /boot/kernel/if_alc.ko
> > > @x230a:/ # uname -UK
> > > 1101001 1101001
> > >
> >=20
> > The one listed in my email:
> >=20
> > https://www.freebsd.org/relnotes/11-STABLE/hardware/support.html
> >=20
> > alc(4) isn't listed there.
>=20
> Thank you, I should of reread the whole of the message before I
> asked you to repeat your self.
>=20
> I have checked the 11.0R 11.1R release notes at:
> https://www.freebsd.org/releases/11.0R/relnotes.html
> https://www.freebsd.org/releases/11.1R/relnotes.html
>=20
> and the infact do list alc(4) correctly, so I have sent an internal
> mail to Release Engineering so that we can track down why the
> release notes at
> https://www.freebsd.org/relnotes/11-STABLE/hardware/support.html
> are not reflecting this.
>=20
> I suspect this happened in a transition that recently occured=20
> to the repository location that the release notes are stored in/
> generated from.
>=20

For 11.x, no, this is not the case.  That change was only in 12-CURRENT,
and was not retroactively applied to stable branches due to a problem
that is outstanding with the hardware page generation for 12.

That said, I'll try to track down where exactly this driver went missing
=66rom the hardware page, but it is too late to fix it for the 11.2
release.  It can be noted in an errata entry, however, and a link to the
11-STABLE page once it is fixed there.

Glen


--FsscpQKzF/jJk6ya
Content-Type: application/pgp-signature; name="signature.asc"

-----BEGIN PGP SIGNATURE-----
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=23+y
-----END PGP SIGNATURE-----

--FsscpQKzF/jJk6ya--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?258e76fb.130ea.1643637345e.Coremail.kelly>