Date: Wed, 5 Jan 2000 04:50:03 -0800 (PST) From: Tony Finch <fanf@demon.net> To: freebsd-bugs@FreeBSD.org Subject: Re: kern/12104: Certain cdcontrol commands don%27t work properly with my ATAPI CD-ROM drive Message-ID: <200001051250.EAA27730@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/12104; it has been noted by GNATS.
From: Tony Finch <fanf@demon.net>
To: FreeBSD-gnats-submit@freebsd.org, tempest@ecst.csuchico.edu
Cc:
Subject: Re: kern/12104: Certain cdcontrol commands don%27t work properly with my ATAPI CD-ROM drive
Date: Wed, 05 Jan 2000 12:40:49 +0000
I have the same problem, but with a couple of additional issues: if I
use `cdcontrol status` or `cdcontrol info` while the cd is playing
then playing stops. Also, when I use `cdcontrol close` the kernel logs
"read_toc failed" twice (it also does this if I use `cdcontrol play`
when the drive is open).
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.3-STABLE-19991115 #0: Mon Nov 15 14:39:47 GMT 1999
root@fanf.eng.demon.net:/usr/src/sys/compile/DELL-PREC410-SMP
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III (686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,<b25>>
real memory = 268435456 (262144K bytes)
avail memory = 258355200 (252300K bytes)
Programming 24 pins in IOAPIC #0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc02b8000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc02b809c.
Pentium Pro MTRR support enabled
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x03 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x03 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3
xl0: <3Com 3c905B-TX Fast Etherlink XL> rev 0x00 int a irq 19 on pci0.17.0
xl0: Ethernet address: 00:c0:4f:60:49:dd
xl0: autoneg complete, link status good (half-duplex, 100Mbps)
chip4: <PCI to PCI bridge (vendor=1011 device=0024)> rev 0x03 on pci0.19.0
Probing for devices on PCI bus 1:
vga0: <VGA-compatible display device> rev 0x11 int a irq 16 on pci1.0.0
Probing for devices on PCI bus 2:
ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> rev 0x00 int a irq 18 on pci2.10.0
ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc1: <Adaptec aic7880 Ultra SCSI adapter> rev 0x01 int a irq 18 on pci2.14.0
ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
Probing for PnP devices:
CSN 1 Vendor ID: CSC6835 [0x3568630e] Serial 0xffffffff Comp ID: @@@0000 [0x00000000]
mss_attach <CS4236B>1 at 0x530 irq 5 dma 1:0 flags 0x10
pcm1 (CS423x/Yamaha/AD1816 <CS4236B> sn 0xffffffff) at 0x530-0x537 irq 5 drq 1 flags 0x10 on isa
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 not found at 0x1f0
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <SAMSUNG SC-140B/ d003>, removable, intr, dma, iordis
acd0: drive speed 6875KB/sec, 128KB cache
acd0: supported read types: CD-R, CD-RW, CD-DA, packet track
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM 120mm audio disc loaded, unlocked
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
npx0 on motherboard
npx0: INT 16 interface
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via pin 2
SMP: AP CPU #1 Launched!
changing root device to da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST39103LW 0001> Fixed Direct Access SCSI-2 device
da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200001051250.EAA27730>