Date: Sun, 5 Sep 2004 23:07:16 -0400 From: Derrick Edwards <dantavious@comcast.net> To: freebsd-current@freebsd.org Subject: Re: device pcm Message-ID: <200409052307.16534.dantavious@comcast.net> In-Reply-To: <20040905193154.GD19729@cnd.mcgill.ca> References: <4139D650.9030506@pldrouin.net> <20040905190340.GC39255@abigail.blackend.org> <20040905193154.GD19729@cnd.mcgill.ca>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sunday 05 September 2004 03:31 pm, Mathew Kanner wrote:
Well guys still having probs with sound. I have tried all recommendtions.
This is the outpit of my /dev/sndstat
cat /dev/sndstat
FreeBSD Audio Driver (newpcm)
Installed devices:
pcm0: <Intel ICH4 (82801DB)> at io 0xc000, 0xc400 irq 17 bufsz 16384 (1p/1r/0v
channels duplex default)
Keep in mind that I do have snd_driver loaded in /boot/loader.conf even
snd_ich for overkill
Output of loader.conf
nvidia_load="YES"
hw.ata.atapi_dma="1"
linux_load="YES"
snd_driver_load="YES"
snd_ich_load="YES"
Can anyone explain why i do not have a driver associated with card
in /dev/sndstat. Also, every one out of 50 reboots, I will get sound for 2
seconds then it dies.
This is my pciconfig
pcm0@pci0:31:5: class=0x040100 card=0x4941434d chip=0x24c58086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller'
class = multimedia
subclass = audio
Thanks for the assistance
Derrick
> On Sep 05, Marc Fonvieille wrote:
> > On Sun, Sep 05, 2004 at 03:05:32PM -0400, Mathew Kanner wrote:
> > > Could you add that the easiest way to configure you sound in 5.X+
> > > is to:
> > >
> > > tube# kldload snd_driver
> > > tube# cat /dev/sndstat
> > > FreeBSD Audio Driver (newpcm)
> > > Installed devices:
> > > pcm0: <CMedia CMI8738> at io 0xb800 irq 11 kld snd_cmi (1p/1r/0v
> > > channels duplex default) pcm1: <Creative EMU10K1> at io 0xb400 irq 5
> > > kld snd_emu10k1 (4p/2r/0v channels duplex)
> > >
> > > for each kld snd_foo
> > > echo snd_foo_load="YES" >> /boot/loader.conf
> > >
> > > This method works because snd_driver is just dummy module that
> > > loads all[1] the sound modules. (Oops, just noticed I missed uaudio).
> > > Also, KLDs are the preferred method for sound usage and that ISA
> > > cards likely won't need a hint (PNP).
> > >
> > > --Mat
> > > [1] It only loads the sounds modules that it knew about at compile
> > > time. Some sound modules are provided "third party" such as in the
> > > ports, such modules will be missed by this method and will have to be
> > > specifically loaded.
> >
> > You did not read the link :(
>
> Ok, other than you already have a section on PNP what did I
> miss?
> --Mat
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200409052307.16534.dantavious>