Date: Wed, 23 Jan 2002 22:45:53 +0100 From: "Petar Forai" <petar.forai@chello.at> To: <freebsd-stable@freebsd.org>, <freebsd-questions@freebsd.org>, <freebsd-smp@freebsd.org> Subject: 4.5/SMP clock drifting Message-ID: <000c01c1a457$54d5eae0$5700a8c0@MSHOST>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Hi!
I've a strange problem on my SMP machine running 4.5. At 8am i use ntpdate
to sync the time, at 9:37am when i ntpdate again my time offset from the
timeserver is about 0.7s!
My dmesg output is att.
regards,
#pfo
[-- Attachment #2 --]
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-RC #0: Sat Jan 19 11:19:30 CET 2002
root@KilKenny.vip.at:/usr/src/sys/compile/KILKENNY
Calibrating clock(s) ... TSC clock: 996708824 Hz, i8254 clock: 1193023 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium III/Pentium III Xeon/Celeron (996.85-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 1073741824 (1048576K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x002ed000 - 0x3fff7fff, 1070641152 bytes (261387 pages)
avail memory = 1042186240 (1017760K bytes)
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
SMP: CPU0 apic_initialize():
lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 4, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 5, version: 0x000f0011, at 0xfec01000
bios32: Found BIOS32 Service Directory header at 0xc00fdb90
bios32: Entry = 0xfdba0 (c00fdba0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xdbc1
pnpbios: Found PnP BIOS data at 0xc00f4c50
pnpbios: Entry = f0000:3954 Rev = 1.0
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc02c3000.
Preloaded elf module "accf_http.ko" at 0xc02c309c.
Pentium Pro MTRR support enabled
SMP: CPU0 bsp_apic_configure():
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000010 SVR: 0x000001ff
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000070
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00091166)
Using $PIR table, 10 entries at 0xc00f51c0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
found-> vendor=0x1166, dev=0x0009, revid=0x06
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1166, dev=0x0009, revid=0x06
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
IOAPIC #1 intpin 6 -> irq 2
Freeing (NOT implemented) redirected PCI irq 11.
found-> vendor=0x1002, dev=0x4752, revid=0x27
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=2
map[10]: type 1, range 32, base fd000000, size 24
map[14]: type 1, range 32, base 0000d800, size 8
map[18]: type 1, range 32, base feaff000, size 12
IOAPIC #1 intpin 4 -> irq 5
Freeing (NOT implemented) redirected PCI irq 9.
found-> vendor=0x8086, dev=0x1229, revid=0x08
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base feafe000, size 12
map[14]: type 1, range 32, base 0000d400, size 6
map[18]: type 1, range 32, base fe900000, size 20
IOAPIC #1 intpin 5 -> irq 7
Freeing (NOT implemented) redirected PCI irq 5.
found-> vendor=0x8086, dev=0x1229, revid=0x08
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=7
map[10]: type 1, range 32, base feafd000, size 12
map[14]: type 1, range 32, base 0000d000, size 6
map[18]: type 1, range 32, base fe700000, size 20
found-> vendor=0x1166, dev=0x0200, revid=0x50
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1166, dev=0x0211, revid=0x00
class=01-01-8a, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000ffa0, size 4
IOAPIC #0 intpin 10 -> irq 9
Freeing (NOT implemented) redirected PCI irq 10.
found-> vendor=0x1166, dev=0x0220, revid=0x04
class=0c-03-10, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base feafc000, size 12
pci0: <PCI bus> on pcib0
pci0: <ATI Mach64-GR graphics accelerator> (vendor=0x1002, dev=0x4752) at 1.0 irq 2
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd400-0xd43f mem 0xfe900000-0xfe9fffff,0xfeafe000-0xfeafefff irq 5 at device 4.0 on pci0
fxp0: using memory space register mapping
fxp0: Ethernet address 00:e0:81:04:fc:0d
fxp0: PCI IDs: 8086 1229 8086 100c 0008
fxp0: Dynamic Standby mode is disabled
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xd000-0xd03f mem 0xfe700000-0xfe7fffff,0xfeafd000-0xfeafdfff irq 7 at device 5.0 on pci0
fxp1: using memory space register mapping
fxp1: Ethernet address 00:e0:81:04:fc:0e
fxp1: PCI IDs: 8086 1229 8086 100c 0008
fxp1: Dynamic Standby mode is disabled
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port 0xffa0-0xffaf at device 15.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0
ata0: mask=03 status0=20 status1=30
ata0: mask=03 ostat0=20 ostat2=30
ata0-master: ATAPI probe a=20 b=20
ata0-slave: ATAPI probe a=30 b=30
ata0: mask=03 status0=20 status1=30
ata0-master: ATA probe a=25 b=25
ata0-slave: ATA probe a=25 b=25
ata0: devices=00
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xffa8
ata1: mask=03 status0=50 status1=00
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI probe a=14 b=eb
ata1-slave: ATAPI probe a=7f b=7f
ata1: mask=03 status0=00 status1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
pci0: <OHCI USB controller> (vendor=0x1166, dev=0x0220) at 15.2 irq 9
pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
IOAPIC #1 intpin 9 -> irq 10
Freeing (NOT implemented) redirected PCI irq 7.
found-> vendor=0x9005, dev=0x00cf, revid=0x01
class=01-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 0000e400, size 8
map[14]: type 1, range 64, base febfe000, size 12
IOAPIC #1 intpin 10 -> irq 11
Freeing (NOT implemented) redirected PCI irq 10.
found-> vendor=0x9005, dev=0x00cf, revid=0x01
class=01-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=b, irq=11
map[10]: type 1, range 32, base 0000e800, size 8
map[14]: type 1, range 64, base febff000, size 12
pci1: <PCI bus> on pcib1
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xe400-0xe4ff mem 0xfebfe000-0xfebfefff irq 10 at device 6.0 on pci1
ahc0: Reading SEEPROM...done.
ahc0: Manual LVD Termination
ahc0: BIOS eeprom is present
ahc0: Secondary High byte termination Enabled
ahc0: Secondary Low byte termination Enabled
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: Downloading Sequencer Program... 419 instructions downloaded
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xe800-0xe8ff mem 0xfebff000-0xfebfffff irq 11 at device 6.1 on pci1
ahc1: Reading SEEPROM...done.
ahc1: Manual LVD Termination
ahc1: BIOS eeprom is present
ahc1: Secondary High byte termination Enabled
ahc1: Secondary Low byte termination Enabled
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 419 instructions downloaded
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/255 SCBs
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcffff on isa0
ata2 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: failed to reset the aux device.
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
isa_probe_children: probing PnP devices
SMP: enabled INTs: 1, 5, 7, 10, 11, 14, 15, apic_imen: 0x00ff335d
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
1:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
SMP: AP CPU #1 Launched!
SMP: CPU1 apic_initialize():
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <LTN526S/YS0A> CDROM drive at ata1 as master
acd0: read 8957KB/s (53034KB/s), 120KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
(ahc0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:0:0): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 80.0MHz DT, offset = 0x3f
(ahc1:A:2:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc1:A:2:0): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
ahc1: target 2 using 16bit transfers
ahc1: target 2 synchronous at 80.0MHz DT, offset = 0x3f
(ahc0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:0:0): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
(ahc1:A:2:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:0:1): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc1:A:2:0): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
(ahc0:A:0:1): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
(ahc1:A:2:1): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:0:2): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:0:2): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
(ahc1:A:2:1): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
(ahc0:A:0:3): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc1:A:2:2): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:0:3): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
(ahc1:A:2:2): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
(ahc0:A:0:4): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:0:4): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
(ahc1:A:2:3): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:0:5): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:0:5): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
(ahc1:A:2:3): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
(ahc0:A:0:6): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc1:A:2:4): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:0:6): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
(ahc1:A:2:4): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
(ahc0:A:0:7): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc1:A:2:5): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:0:7): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
(ahc1:A:2:5): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
(ahc1:A:2:6): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc1:A:2:6): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
(ahc1:A:2:7): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc1:A:2:7): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
Creating DISK da0
Creating DISK da1
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <IBM DDYS-T18350N S96H> Fixed Direct Access SCSI-3 device
pass0: Serial Number DYLRQ149
pass0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
pass1 at ahc1 bus 0 target 2 lun 0
pass1: <IBM DDYS-T18350N S96H> Fixed Direct Access SCSI-3 device
pass1: Serial Number DYLRQ147
pass1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DDYS-T18350N S96H> Fixed Direct Access SCSI-3 device
da0: Serial Number DYLRQ149
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da1 at ahc1 bus 0 target 2 lun 0
da1: <IBM DDYS-T18350N S96H> Fixed Direct Access SCSI-3 device
da1: Serial Number DYLRQ147
da1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
Mounting root from ufs:/dev/da0s1a
da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
start_init: trying /sbin/init
da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
Linux ELF exec handler installed
da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK
(da0:ahc0:0:0:0): tagged openings now 128
(da1:ahc1:0:2:0): tagged openings now 128
pid 4469 (yafc), uid 0 on /usr: file system full
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000c01c1a457$54d5eae0$5700a8c0>