Date: Mon, 24 Nov 2003 17:00:29 -0500 From: Barney Wolff <barney@databus.com> To: Jesse Guardiani <jesse@wingnet.net> Cc: freebsd-current@freebsd.org Subject: Re: USB 1.0 IDE to ATAPI drive enclosure failure Message-ID: <20031124220029.GA40910@pit.databus.com> In-Reply-To: <bptu39$khk$1@sea.gmane.org> References: <bptu39$khk$1@sea.gmane.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Nov 24, 2003 at 04:44:02PM -0500, Jesse Guardiani wrote: > > I'm running FreeBSD 5.1-RELEASE. I just bought a generic > USB 1.1/2.0/firewire external drive enclosure for my 32gb > Travelstar 2.0" 12.5mm hard drive. > > The device shows up like this: > > Nov 18 14:06:16 trevarthan kernel: umass0: Acer Labs USB 2.0 Storage Device, rev 2.00/1.03, addr 3 > Nov 18 14:06:16 trevarthan kernel: da0 at umass-sim0 bus 0 target 0 lun 0 > Nov 18 14:06:17 trevarthan kernel: da0: <USB 2.0 Storage Device 0100> Fixed Direct Access SCSI-0 device > Nov 18 14:06:17 trevarthan kernel: da0: 1.000MB/s transfers > Nov 18 14:06:17 trevarthan kernel: da0: 30520MB (62506080 512 byte sectors: 255H 63S/T 3890C) > > But `ls -al /dev/da*` reveals no slices: If you're using an ohci usb controller, perhaps you need a patch. Browse the -current archives for the last week or so. Why hasn't anything been committed? -- Barney Wolff http://www.databus.com/bwresume.pdf I'm available by contract or FT, in the NYC metro area or via the 'Net.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031124220029.GA40910>