Date: Mon, 24 Oct 2005 06:59:13 -0700 (PDT) From: Arne "Wörner" <arne_woerner@yahoo.com> To: freebsd-multimedia@freebsd.org, therion@ninth-art.de Subject: Re: problems with bktr0 and cheap TV card FlyVideo Message-ID: <20051024135913.69403.qmail@web30313.mail.mud.yahoo.com> In-Reply-To: <200510241543.36984.molnarcs@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
As far as I remember you should do a
# mixer rec 50
or so, too... So that the volume is ok...
Zero is not enough... Family motto... ;-))
^^^ that was just a joke... Okay...
And like it was said correctly: The recording source is to be set
to the right value...
In my system I can hear the audio signal with and without
recording source set correctly... I mean: I just say "mixer cd 50"
and then I can hear the TV audio signal... But maybe I have a
funny audio card (VIA 8233 or so)...
-Arne
--- Molnár Csaba <csabamolnar@gmail.com> wrote:
> On Monday 24 October 2005 15.31, Georg Bege wrote:
> I don't see the recording source line in your mixer output, like
> in here:
>
> mcsaba@mcsaba$ mixer
> Mixer vol is currently set to 80:80
> Mixer pcm is currently set to 79:79
> Mixer speaker is currently set to 75:75
> Mixer line is currently set to 75:75
> Mixer mic is currently set to 0:0
> Mixer cd is currently set to 75:75
> Mixer rec is currently set to 0:0
> Mixer ogain is currently set to 50:50
> Mixer line1 is currently set to 75:75
> Mixer phin is currently set to 0:0
> Mixer phout is currently set to 0:0
> Recording source: mic
>
> If you plugged the audio cable in line in, you should try:
>
> mixer =rec line
>
> > Thanks for your reply,
> >
> > I connect the audio cable from the tv card in line-in.
> >
> > Arne
>
"W�������������������������������"
> wrote:
> > >--- Georg Bege <therion@ninth-art.de> wrote:
> > >>I've a problem on FreeBSD 6.0-RC1 with an cheap TV card,
> > >>
> > >>bktr0: <BrookTree 878> mem 0xec000000-0xec000fff irq 21 at
> > >>device 10.0
> > >>on pci2
> > >>bktr0: [GIANT-LOCKED]
> > >>bktr0: Card has no configuration EEPROM. Cannot determine
> card
> > >>make.
> > >>bktr0: IMS TV Turbo, Philips FR1236 NTSC FM tuner.
> > >>
> > >>Im using fxtv with following command:
> > >>
> > >>therion@fortuna ~ % fxtv -inputFormat pal -tunerMode cable
> > >>-defaultInput
> > >>tuner -defaultAudioInput tuner -cableFreqSet weurope
> > >>-mixerChannel line
> > >>
> > >>I got channels and the picture but no audio,
> > >>Im using a Sound Blaster Live! Value (older card) with
> emu10k1
> > >>which
> > >>works perfectly.
> > >>My machine is a Pentium 4 3.0GHz with 1024M DDR-SDRAM.
> > >>
> > >>Here the relevant data of my KERNCONF:
> > >>
> > >># bktr support
> > >>device iicbus
> > >>device iicbb
> > >>device smbus
> > >>device iicsmb
> > >>device bktr
> > >>options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL
> > >>
> > >>Some sysctl entries in /etc/sysctl.conf:
> > >>
> > >>hw.bt848.card=10
> > >>hw.bt848.tuner=10
> > >>
> > >>mixer settings:
> > >>
> > >>Mixer vol is currently set to 100:100
> > >>Mixer pcm is currently set to 81:81
> > >>Mixer speaker is currently set to 75:75
> > >>Mixer line is currently set to 95:95
> > >>Mixer mic is currently set to 0:0
> > >>Mixer cd is currently set to 75:75
> > >>Mixer rec is currently set to 0:0
> > >>Mixer line1 is currently set to 75:75
> > >>Mixer phin is currently set to 0:0
> > >>Mixer phout is currently set to 0:0
> > >>Mixer video is currently set to 75:75
> > >>
> > >>PS: Soundcard works on GNU/Linux, just wanted to say that it
> is
> > >>impossible that the card is broken/damaged.
> > >
> > >Where did you connect the audio connector? To the mic-in,
> line-in
> > >or cd-in? Or does the TV card send the audio data via PCI to
> the
> > >bktr driver?
> > >
> > >My pinnacle TV card sends the audio data via a cable to the
> cd-in
> > >connector...
> > >
> > >-Arne
> > >
> > >
> > >
> > >
> > >__________________________________
> > >Start your day with Yahoo! - Make it your home page!
> > >http://www.yahoo.com/r/hs
> >
> > _______________________________________________
> > freebsd-multimedia@freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
> > To unsubscribe, send any mail to
> > "freebsd-multimedia-unsubscribe@freebsd.org"
> _______________________________________________
> freebsd-multimedia@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
> To unsubscribe, send any mail to
> "freebsd-multimedia-unsubscribe@freebsd.org"
>
__________________________________
Yahoo! FareChase: Search multiple travel sites in one click.
http://farechase.yahoo.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20051024135913.69403.qmail>