Date: Sun, 29 Aug 2004 22:56:58 +0300 From: Ruslan Ermilov <ru@FreeBSD.org> To: "M. Warner Losh" <imp@bsdimp.com> Cc: nate@root.org Subject: Re: No more floppy drive Message-ID: <20040829195658.GA39813@ip.net.ua> In-Reply-To: <20040825.171523.10602123.imp@bsdimp.com> References: <20040825222345.GB79209@ip.net.ua> <20040825.163130.66167637.imp@bsdimp.com> <412D1CE6.3050603@root.org> <20040825.171523.10602123.imp@bsdimp.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--+xNpyl7Qekk2NvDX
Content-Type: multipart/mixed; boundary="mxv5cy4qt+RJ9ypb"
Content-Disposition: inline
--mxv5cy4qt+RJ9ypb
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
On Wed, Aug 25, 2004 at 05:15:23PM -0600, M. Warner Losh wrote:
> In message: <412D1CE6.3050603@root.org>
> Nate Lawson <nate@root.org> writes:
> : M. Warner Losh wrote:
> : > In message: <20040825222345.GB79209@ip.net.ua>
> : > Ruslan Ermilov <ru@freebsd.org> writes:
> : > : On Wed, Aug 25, 2004 at 04:17:33PM -0600, M. Warner Losh wrote:
> : > : > Generally one doesn't want ANY hints when one has pnpisabios or a=
cpi
> : > : > supplying the hints, unless one really does have an exceptional d=
evice
> : > : > at that location.
> : > : >=20
> : > : A lot of current@ users report missing /dev/fd0 due to this. Can t=
his
> : > : be fixed somehow?
> : >=20
> : > acpi should be providing these hints, but it appears that either that
> : > code isn't working, hasn't been committed or there's no fallback to
> : > more traditional methods when there's no information about fd drives.
> : > This is one of the twistiest, nastiest, ugliest part of PCAT :-(
> :=20
> : The code I added merely does:
> :=20
> : if (_FDE working)
> : add fd[0-2] children accordingly
> : if (fdX._FDI working)
> : set type on fdX
> : else
> : unmodified hints probe for fd[0-2]
> :=20
> : if (fdX type not set)
> : unmodified drive type probe via rtc
> :=20
> : Since the probe is unmodified if _FDE is not present, I can't see a new=
=20
> : problem here. If this is a new problem, it must be elsewhere.
>=20
> I'll take a look at things. I think it may have to do with
> presence/absence things.
>=20
Update. I tried to experiment a bit more today, and with ACPI,
I cannot get fdc(4) working, with or without fdc hints in
/boot/device.hints. So the only way to get my floppy working
at the moment is: without ACPI and without hint.fdc.0. hints
in /device.hints.
Attached are verbose boot outputs without and with ACPI.
Like I mentioned, with ACPI I'm also getting interrupt storms.
Also, Warner, as you probably remember, I have to use the
following on my notebook:
hw.cbb.start_memory=3D0xd8000
Previously, without this tunable, my PCCARDs just were not
properly attached. Now if I remove this line, the kernel
panics at boot. Let me know if you're interested in the
panic details. Also, could you remind me what this tunable
does?
Cheers,
--=20
Ruslan Ermilov
ru@FreeBSD.org
FreeBSD committer
--mxv5cy4qt+RJ9ypb
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.boot.no_ACPI"
Content-Transfer-Encoding: quoted-printable
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT #8: Fri Aug 27 13:06:06 EEST 2004
ru@ru.ipnet.kiev.ua:/usr/obj/usr/src/sys/LURKER
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0758000.
Preloaded elf module "/boot/kernel/if_dc.ko" at 0xc0758228.
Preloaded elf module "/boot/kernel/miibus.ko" at 0xc07582d4.
Preloaded elf module "/boot/kernel/snd_csa.ko" at 0xc0758380.
Preloaded elf module "/boot/kernel/sound.ko" at 0xc075842c.
Calibrating clock(s) ... i8254 clock: 1193191 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 498273061 Hz
CPU: Intel Pentium III (498.27-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x681 Stepping =3D 1
Features=3D0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory =3D 134021120 (127 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000826000 - 0x0000000007d60fff, 122925056 bytes (30011 pages)
avail memory =3D 125685760 (119 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fd800
bios32: Entry =3D 0xfd820 (c00fd820) Rev =3D 0 Len =3D 1
pcibios: PCI BIOS entry at 0xfd880+0x0
pnpbios: Found PnP BIOS data at 0xc00fe700
pnpbios: Entry =3D f0000:e724 Rev =3D 1.0
pnpbios: Event flag at 415
Other BIOS signatures found:
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x000038c8
pci_open(1a): mode1res=3D0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D71908086)
pcibios: BIOS version 2.10
Found $PIR table, 6 entries at 0xc00f9d00
PCI-Only Interrupts: 11
Location Bus Device Pin Link IRQs
embedded 0 7 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 6 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 3 A 0x62 3 4 5 6 7 9 10 11 12 14 15
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 6 Entries> on motherboard
$PIR: Links after initial probe:
Link IRQ Rtd Ref IRQs
0x60 255 N 5 3 4 5 6 7 9 10 11 12 14 15
0x63 255 N 2 3 4 5 6 7 9 10 11 12 14 15
0x61 255 N 2 3 4 5 6 7 9 10 11 12 14 15
0x62 255 N 2 3 4 5 6 7 9 10 11 12 14 15
$PIR: Found matching pin for 0.7.INTD at func 2: 11
$PIR: Found matching pin for 0.2.INTA at func 0: 11
$PIR: Found matching pin for 0.2.INTB at func 1: 11
$PIR: Found matching pin for 1.0.INTA at func 0: 11
$PIR: Found matching pin for 0.6.INTA at func 0: 11
$PIR: Found matching pin for 0.3.INTA at func 0: 11
$PIR: Links after initial IRQ discovery:
Link IRQ Rtd Ref IRQs
0x60 11 Y 5 3 4 5 6 7 9 10 11 12 14 15
0x63 11 Y 2 3 4 5 6 7 9 10 11 12 14 15
0x61 11 Y 2 3 4 5 6 7 9 10 11 12 14 15
0x62 11 Y 2 3 4 5 6 7 9 10 11 12 14 15
$PIR: IRQs used by BIOS: 11
$PIR: Interrupt Weights:
[ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
[ 0 0 0 0 0 0 0 0 0 0 0 11 0 0 0 0 ]
pci0: <PCI bus> on pcib0
pci0: physical bus=3D0
map[10]: type 3, range 32, base 40000000, size 26, enabled
found-> vendor=3D0x8086, dev=3D0x7190, revid=3D0x03
bus=3D0, slot=3D0, func=3D0
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0006, statreg=3D0xa210, cachelnsz=3D0 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x7191, revid=3D0x03
bus=3D0, slot=3D1, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0220, cachelnsz=3D0 (dwords)
lattimer=3D0xa8 (5040 ns), mingnt=3D0x88 (34000 ns), maxlat=3D0x00 (0 ns)
map[10]: type 1, range 32, base 50103000, size 12, enabled
$PIR: 0:2 INTA routed to irq 11
found-> vendor=3D0x104c, dev=3D0xac1b, revid=3D0x03
bus=3D0, slot=3D2, func=3D0
class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1
cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords)
lattimer=3D0xa8 (5040 ns), mingnt=3D0xc0 (48000 ns), maxlat=3D0x03 (750 ns)
intpin=3Da, irq=3D11
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 50102000, size 12, enabled
$PIR: 0:2 INTB routed to irq 11
found-> vendor=3D0x104c, dev=3D0xac1b, revid=3D0x03
bus=3D0, slot=3D2, func=3D1
class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1
cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords)
lattimer=3D0xa8 (5040 ns), mingnt=3D0xc0 (48000 ns), maxlat=3D0x03 (750 ns)
intpin=3Db, irq=3D11
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 50101000, size 8, enabled
map[14]: type 4, range 32, base 00004500, size 3, enabled
map[18]: type 4, range 32, base 00004400, size 8, enabled
$PIR: 0:3 INTA routed to irq 11
found-> vendor=3D0x11c1, dev=3D0x0449, revid=3D0x01
bus=3D0, slot=3D3, func=3D0
class=3D07-80-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0107, statreg=3D0x8290, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0xfc (63000 ns), maxlat=3D0x0e (3500 ns)
intpin=3Da, irq=3D11
powerspec 2 supports D0 D2 D3 current D0
map[10]: type 1, range 32, base 50100000, size 12, enabled
map[14]: type 1, range 32, base 50000000, size 20, enabled
$PIR: 0:6 INTA routed to irq 11
found-> vendor=3D0x1013, dev=3D0x6003, revid=3D0x01
bus=3D0, slot=3D6, func=3D0
class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0106, statreg=3D0x0410, cachelnsz=3D0 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x18 (6000 ns)
intpin=3Da, irq=3D11
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=3D0x8086, dev=3D0x7110, revid=3D0x02
bus=3D0, slot=3D7, func=3D0
class=3D06-80-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x000f, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
map[20]: type 4, range 32, base 0000fcf0, size 4, enabled
found-> vendor=3D0x8086, dev=3D0x7111, revid=3D0x01
bus=3D0, slot=3D7, func=3D1
class=3D01-01-80, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x30 (1440 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
map[20]: type 4, range 32, base 00004000, size 5, enabled
$PIR: 0:7 INTD routed to irq 11
found-> vendor=3D0x8086, dev=3D0x7112, revid=3D0x01
bus=3D0, slot=3D7, func=3D2
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x30 (1440 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Dd, irq=3D11
map[90]: type 4, range 32, base 0000efa0, size 4, enabled
found-> vendor=3D0x8086, dev=3D0x7113, revid=3D0x03
bus=3D0, slot=3D7, func=3D3
class=3D06-80-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0003, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0x40000000-0x43ffffff=
at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0x40000000
agp0: allocating GATT for aperture of size 64M
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xd000-0xdfff
pcib1: memory decode 0x70000000-0xdfffffff
pcib1: prefetched decode 0xe0000000-0xf7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=3D1
map[10]: type 3, range 32, base e0000000, size 25, enabled
pcib1: device (null) requested decoded memory range 0xe0000000-0xe1ffffff
map[14]: type 1, range 32, base 70000000, size 22, enabled
pcib1: device (null) requested decoded memory range 0x70000000-0x703fffff
map[18]: type 1, range 32, base 70400000, size 20, enabled
pcib1: device (null) requested decoded memory range 0x70400000-0x704fffff
$PIR: 1:0 INTA routed to irq 11
found-> vendor=3D0x10c8, dev=3D0x0006, revid=3D0x00
bus=3D1, slot=3D0, func=3D0
class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x80 (3840 ns), mingnt=3D0x10 (4000 ns), maxlat=3D0xff (63750 n=
s)
intpin=3Da, irq=3D11
powerspec 1 supports D0 D1 D2 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <TI1450 PCI-CardBus Bridge> mem 0x50103000-0x50103fff irq 11 at devic=
e 2.0 on pci0
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x50103000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0xac1b104c 0x02100007 0x06070003 0x0082a808=20
0x10: 0x50103000 0x020000a0 0xb0040200 0xfffff000=20
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc=20
0x30: 0x00000000 0x0000fffc 0x00000000 0x0740010b=20
0x40: 0x01301014 0x00000001 0x00000000 0x00000000=20
0x50: 0x00000000 0x00000000 0x00000000 0x00000000=20
0x60: 0x00000000 0x00000000 0x00000000 0x00000000=20
0x70: 0x00000000 0x00000000 0x00000000 0x00000000=20
0x80: 0x00449068 0x00000000 0x80818080 0x00001000=20
0x90: 0x416682c0 0x00000000 0x00000000 0x00000000=20
0xa0: 0x7e110001 0x00c00000 0x00000000 0x00000000=20
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000=20
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000=20
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000=20
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000=20
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000=20
cbb1: <TI1450 PCI-CardBus Bridge> mem 0x50102000-0x50102fff irq 11 at devic=
e 2.1 on pci0
cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x50102000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
0x00: 0xac1b104c 0x02100007 0x06070003 0x0082a808=20
0x10: 0x50102000 0x220000a0 0xb0070500 0xfffff000=20
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc=20
0x30: 0x00000000 0x0000fffc 0x00000000 0x0740020b=20
0x40: 0x01301014 0x00000001 0x00000000 0x00000000=20
0x50: 0x00000000 0x00000000 0x00000000 0x00000000=20
0x60: 0x00000000 0x00000000 0x00000000 0x00000000=20
0x70: 0x00000000 0x00000000 0x00000000 0x00000000=20
0x80: 0x00449068 0x00000000 0x80818080 0x00001000=20
0x90: 0x416683c0 0x00000000 0x00000000 0x00000000=20
0xa0: 0x7e110001 0x00c00000 0x00000000 0x00000000=20
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000=20
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000=20
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000=20
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000=20
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000=20
pci0: <simple comms> at device 3.0 (no driver attached)
csa0: <CS4280/CS4614/CS4622/CS4624/CS4630> mem 0x50000000-0x500fffff,0x5010=
0000-0x50100fff irq 11 at device 6.0 on pci0
csa: card is Thinkpad 600X/A20/T20
csa0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x50100000
csa0: Reserved 0x100000 bytes for rid 0x14 type 3 at 0x50000000
csa0: [GIANT-LOCKED]
pcm0: <CS461x PCM Audio> on csa0
pcm0: <Cirrus Logic CS4297A AC97 Codec (id =3D 0x43525913)>
pcm0: Codec features headphone, 20 bit DAC, 18 bit ADC, 6 bit master volume=
, Crystal Semi 3D Stereo Enhancement
pcm0: Primary codec extended features AMAP
pcm0: [GIANT-LOCKED]
pcm0: sndbuf_setmap 198000, 1000; 0xc0f44000 -> 198000
pcm0: sndbuf_setmap 19a000, 1000; 0xc0f46000 -> 19a000
PCI-ISA bridge with incorrect subclass 0x80
PCI-ISA bridge with incorrect subclass 0x80
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xfcf0-0xfcff,0x376,0x170-0x1=
77,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfcf0
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00
ata0-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata0-slave: stat=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata0: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=3D03 ostat0=3D51 ostat1=3D01
ata1-master: stat=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb
ata1-slave: stat=3D0x01 err=3D0x24 lsb=3D0x00 msb=3D0x00
ata1: reset tp2 stat0=3D00 stat1=3D01 devices=3D0x4<ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 7.2 (no driver attached)
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
cpu0 on motherboard
pnpbios: 18 devices, largest 122 bytes
PNP0200: adding fixed io range 0-0xf, size=3D0x10, align=3D0x1
PNP0200: adding fixed io range 0x80-0x8f, size=3D0x10, align=3D0x1
PNP0200: adding fixed io range 0xc0-0xdf, size=3D0x20, align=3D0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 1 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding fixed io range 0x40-0x43, size=3D0x4, align=3D0x1
pnpbios: handle 2 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding fixed io range 0x70-0x73, size=3D0x4, align=3D0x1
pnpbios: handle 3 device ID PNP0b00 (000bd041)
PNP0800: adding fixed io range 0x61-0x61, size=3D0x1, align=3D0x1
pnpbios: handle 4 device ID PNP0800 (0008d041)
PNP0303: adding irq mask 0x2
PNP0303: adding fixed io range 0x60-0x60, size=3D0x1, align=3D0x1
PNP0303: adding fixed io range 0x64-0x64, size=3D0x1, align=3D0x1
pnpbios: handle 5 device ID PNP0303 (0303d041)
IBM3780: adding irq mask 0x1000
pnpbios: handle 6 device ID IBM3780 (80374d24)
PNP0c04: adding fixed io range 0xf0-0xff, size=3D0x10, align=3D0x1
PNP0c04: adding irq mask 0x2000
pnpbios: handle 7 device ID PNP0c04 (040cd041)
PNP0700: adding irq mask 0x40
PNP0700: adding io range 0x3f0-0x3f5, size=3D0x6, align=3D0x80
PNP0700: adding dma mask 0x4
pnpbios: handle 8 device ID PNP0700 (0007d041)
PNP0a03: adding io range 0xcf8-0xcff, size=3D0x8, align=3D0
pnpbios: handle 9 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0x22-0x22, size=3D0x1, align=3D0
PNP0c02: adding io range 0x2e-0x2f, size=3D0x2, align=3D0
PNP0c02: adding io range 0x92-0x92, size=3D0x1, align=3D0
PNP0c02: adding io range 0xb2-0xb3, size=3D0x2, align=3D0
PNP0c02: adding io range 0x4d0-0x4d1, size=3D0x2, align=3D0
PNP0c02: adding io range 0x15e0-0x15ef, size=3D0x10, align=3D0
PNP0c02: adding io range 0xef00-0xefaf, size=3D0xb0, align=3D0
PNP0c02: adding fixed memory32 range 0-0x9ffff, size=3D0xa0000
PNP0c02: adding fixed memory32 range 0xf0000-0xfffff, size=3D0x10000
PNP0c02: adding fixed memory32 range 0x100000-0x7ffffff, size=3D0x7f00000
PNP0c02: adding fixed memory32 range 0xffff0000-0xffffffff, size=3D0x10000
pnpbios: handle 10 device ID PNP0c02 (020cd041)
PNP0400: adding irq mask 0x80
PNP0400: adding io range 0x3bc-0x3bf, size=3D0x4, align=3D0
pnpbios: handle 11 device ID PNP0400 (0004d041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=3D0x8, align=3D0
pnpbios: handle 13 device ID PNP0501 (0105d041)
IBM0071: adding irq mask 0x8
IBM0071: adding io range 0x2f8-0x2ff, size=3D0x8, align=3D0x1
IBM0071: adding dma mask 0x8
pnpbios: handle 14 device ID IBM0071 (71004d24)
PNP0e03: adding io range 0-0x1, size=3D0x2, align=3D0
pnpbios: handle 15 device ID PNP0e03 (030ed041)
PNP0680: adding irq mask 0x4000
PNP0680: adding io range 0x1f0-0x1f7, size=3D0x8, align=3D0
PNP0680: adding io range 0x3f6-0x3f7, size=3D0x2, align=3D0
PNP0680: adding io range 0xfcf0-0xfcf7, size=3D0x8, align=3D0
pnpbios: handle 18 device ID PNP0680 (8006d041)
PNP0680: adding irq mask 0x8000
PNP0680: adding io range 0x170-0x177, size=3D0x8, align=3D0
PNP0680: adding io range 0x376-0x376, size=3D0x1, align=3D0
PNP0680: adding io range 0xfcf8-0xfcff, size=3D0x8, align=3D0
pnpbios: handle 20 device ID PNP0680 (8006d041)
pnpbios: handle 22 device ID PNP0c02 (020cd041)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff on isa0
atkbd: the current kbd controller command byte 0045
atkbd: keyboard ID 0x54ab (2)
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=3D0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0045
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port found at 0x3bc
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at port 0x3bc-0x3c3 irq 7 on isa0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <IBM3780> can't assign resources (irq)
unknown: <IBM3780> at irq 12 on isa0
fdc0: ic_type 90 part_id 73
fdc0: <Enhanced floppy controller> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on=
isa0
fdc0: ic_type 90 part_id 73
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x4d0-0x4d1,0xb2-0xb3,0x92,0x2e-0x2f,0x22 iomem =
0xffff0000-0xffffffff,0x100000-0x7ffffff,0xf0000-0xfffff,0-0x9ffff on isa0
ppc1: using normal I/O port range
ppc1: SPP
ppc1: <Standard parallel printer port> at port 0x3bc-0x3bf irq 7 on isa0
ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc1
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <IBM0071> can't assign resources (port)
unknown: <IBM0071> at port 0x2f8-0x2ff on isa0
unknown: <PNP0e03> can't assign resources (port)
unknown: <PNP0e03> at port 0-0x1 on isa0
unknown: <PNP0680> can't assign resources (port)
unknown: <PNP0680> at port 0x1f0-0x1f7 on isa0
unknown: <PNP0680> can't assign resources (port)
unknown: <PNP0680> at port 0x170-0x177 on isa0
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 498273061 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
found-> vendor=3D0x115d, dev=3D0x0003, revid=3D0x03
bus=3D5, slot=3D0, func=3D0
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0000, statreg=3D0x0210, cachelnsz=3D8 (dwords)
lattimer=3D0xa8 (5040 ns), mingnt=3D0x14 (5000 ns), maxlat=3D0x28 (10000 n=
s)
intpin=3Da, irq=3D222
powerspec 1 supports D0 D1 D2 D3 current D0
dc0: <Xircom X3201 10/100BaseTX> port 0x1000-0x107f mem 0xd8000-0xd87ff,0xd=
8800-0xd8fff irq 11 at device 0.0 on cardbus1
miibus0: <MII bus> on dc0
tdkphy0: <TDK 78Q2120 media interface> on miibus0
tdkphy0: OUI 0x00c039, model 0x0014, rev. 11
tdkphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: bpf attached
dc0: Ethernet address: 00:10:a4:c0:c0:45
dc0: [GIANT-LOCKED]
ata0-master: pio=3D0x0c wdma=3D0x22 udma=3D0x44 cable=3D80pin
ata0-master: setting PIO4 on Intel PIIX4 chip
ata0-master: setting UDMA33 on Intel PIIX4 chip
ad0: <IBM-DARA-212000/AR4IA55A> ATA-4 disk at ata0-master
ad0: 11509MB (23572080 sectors), 24944 C, 15 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ata1-master: pio=3D0x0c wdma=3D0x22 udma=3D0xffffffff cable=3D40pin
ATAPI_RESET time =3D 10us
ata1-master: setting PIO4 on Intel PIIX4 chip
acd0: <LG DVD-ROM DRN-8080B/1.13> DVDROM drive at ata1 as master
acd0: 512KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
GEOM: new disk ad0
[0] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/74/63 s:0 l:23572080
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 0 length 12068904960 end 12068904959
GEOM: Configure ad0a, start 0 length 134217728 end 134217727
GEOM: Configure ad0b, start 134217728 length 134217728 end 268435455
GEOM: Configure ad0c, start 0 length 12068904960 end 12068904959
GEOM: Configure ad0e, start 268435456 length 268435456 end 536870911
GEOM: Configure ad0f, start 536870912 length 268435456 end 805306367
GEOM: Configure ad0g, start 805306368 length 11263598592 end 12068904959
GEOM: Configure ad0s1a, start 0 length 134217728 end 134217727
GEOM: Configure ad0s1b, start 134217728 length 134217728 end 268435455
GEOM: Configure ad0s1c, start 0 length 12068904960 end 12068904959
GEOM: Configure ad0s1e, start 268435456 length 268435456 end 536870911
GEOM: Configure ad0s1f, start 536870912 length 268435456 end 805306367
GEOM: Configure ad0s1g, start 805306368 length 11263598592 end 12068904959
Mounting root from ufs:/dev/ad0a
start_init: trying /sbin/init
gif0: bpf attached
ipfw2 initialized, divert disabled, rule-based forwarding disabled, default=
to deny, logging disabled
--mxv5cy4qt+RJ9ypb
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.boot.ACPI"
Content-Transfer-Encoding: quoted-printable
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT #8: Fri Aug 27 13:06:06 EEST 2004
ru@ru.ipnet.kiev.ua:/usr/obj/usr/src/sys/LURKER
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc07b7000.
Preloaded elf module "/boot/kernel/if_dc.ko" at 0xc07b7228.
Preloaded elf module "/boot/kernel/miibus.ko" at 0xc07b72d4.
Preloaded elf module "/boot/kernel/snd_csa.ko" at 0xc07b7380.
Preloaded elf module "/boot/kernel/sound.ko" at 0xc07b742c.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07b74d8.
Calibrating clock(s) ... i8254 clock: 1193195 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 498272951 Hz
CPU: Intel Pentium III (498.27-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x681 Stepping =3D 1
Features=3D0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory =3D 134021120 (127 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000826000 - 0x0000000007d60fff, 122925056 bytes (30011 pages)
avail memory =3D 125681664 (119 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fd800
bios32: Entry =3D 0xfd820 (c00fd820) Rev =3D 0 Len =3D 1
pcibios: PCI BIOS entry at 0xfd880+0x0
pnpbios: Found PnP BIOS data at 0xc00fe700
pnpbios: Entry =3D f0000:e724 Rev =3D 1.0
pnpbios: Event flag at 415
Other BIOS signatures found:
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM TP600X> on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x000038c8
pci_open(1a): mode1res=3D0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D71908086)
pcibios: BIOS version 2.10
Found $PIR table, 6 entries at 0xc00f9d00
PCI-Only Interrupts: 11
Location Bus Device Pin Link IRQs
embedded 0 7 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 6 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 3 A 0x62 3 4 5 6 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 1 func 0
acpi0: [MPSAFE]
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 2 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 2 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 3
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 1
acpi0: Power Button (fixed)
atpic: Programming IRQ9 as level/low
acpi_ec0: <Embedded Controller: GPE 0x9, GLK> port 0x66,0x62 on acpi0
acpi_ec0: info: new max delay is 20 us
acpi_ec0: info: new max delay is 30 us
acpi_ec0: info: new max delay is 40 us
acpi_ec0: info: new max delay is 60 us
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 0 func 1
ACPI timer looks BAD min =3D 2, max =3D 6, width =3D 4
ACPI timer looks BAD min =3D 2, max =3D 6, width =3D 4
ACPI timer looks BAD min =3D 2, max =3D 6, width =3D 4
ACPI timer looks BAD min =3D 2, max =3D 6, width =3D 4
ACPI timer looks BAD min =3D 2, max =3D 6, width =3D 4
ACPI timer looks BAD min =3D 2, max =3D 6, width =3D 4
ACPI timer looks BAD min =3D 2, max =3D 6, width =3D 4
ACPI timer looks BAD min =3D 2, max =3D 6, width =3D 4
ACPI timer looks BAD min =3D 2, max =3D 6, width =3D 4
ACPI timer looks BAD min =3D 2, max =3D 6, width =3D 4
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xef08-0xef0b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
acpi_tz3: <Thermal Zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
unknown: not probed (disabled)
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
acpi link get: empty IRQ resource
acpi link get: empty IRQ resource
acpi link get: empty IRQ resource
acpi link get: empty IRQ resource
ACPI PCI link initial configuration:
\\_SB_.LNKD irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0+ low,level,sharab=
le 0.7.3
\\_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0+ low,level,sharab=
le 0.2.0
\\_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0+ low,level,sharab=
le 0.2.1
\\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0+ low,level,sharab=
le 0.3.0
\\_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0+ low,level,sharab=
le 0.5.0
\\_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0+ low,level,sharab=
le 0.6.0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=3D0
map[10]: type 3, range 32, base 40000000, size 26, enabled
found-> vendor=3D0x8086, dev=3D0x7190, revid=3D0x03
bus=3D0, slot=3D0, func=3D0
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0006, statreg=3D0xa210, cachelnsz=3D0 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x7191, revid=3D0x03
bus=3D0, slot=3D1, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0220, cachelnsz=3D0 (dwords)
lattimer=3D0xa8 (5040 ns), mingnt=3D0x88 (34000 ns), maxlat=3D0x00 (0 ns)
map[10]: type 1, range 32, base 50103000, size 12, enabled
pcib0: matched entry for 0.2.INTA (src \\_SB_.LNKA)
pcib0: possible interrupts: 3 4 5 6 7 9 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.LNKA (references 2, priority 22867):
interrupts: 11 10 5 9 12 7 6 4 3 15 =
14
penalty: 60 60 110 120 5060 5060 5060 5060 5060 50060 50060
\\_SB_.LNKB (references 2, priority 22867):
interrupts: 11 10 5 9 12 7 6 4 3 15 =
14
penalty: 60 60 110 120 5060 5060 5060 5060 5060 50060 50060
\\_SB_.LNKD (references 1, priority 11433):
interrupts: 11 10 5 9 12 7 6 4 3 15 =
14
penalty: 60 60 110 120 5060 5060 5060 5060 5060 50060 50060
\\_SB_.LNKC (references 1, priority 11433):
interrupts: 11 10 5 9 12 7 6 4 3 15 =
14
penalty: 60 60 110 120 5060 5060 5060 5060 5060 50060 50060
acpi link get: empty IRQ resource
acpi link set: _CRS failed for link \\_SB_.LNKA - AE_NULL_ENTRY
acpi link set: curr irq 0 !=3D 11 for \\_SB_.LNKA
pcib0: slot 2 INTA routed to irq 11 via \\_SB_.LNKA
found-> vendor=3D0x104c, dev=3D0xac1b, revid=3D0x03
bus=3D0, slot=3D2, func=3D0
class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1
cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords)
lattimer=3D0xa8 (5040 ns), mingnt=3D0xc0 (48000 ns), maxlat=3D0x03 (750 ns)
intpin=3Da, irq=3D11
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 50102000, size 12, enabled
pcib0: matched entry for 0.2.INTB (src \\_SB_.LNKB)
pcib0: possible interrupts: 3 4 5 6 7 9 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.LNKB (references 2, priority 23001):
interrupts: 10 11 5 9 12 7 6 4 3 15 =
14
penalty: 120 140 170 240 5120 5120 5120 5120 5120 50120 50120
\\_SB_.LNKD (references 1, priority 11500):
interrupts: 10 11 5 9 12 7 6 4 3 15 =
14
penalty: 120 140 170 240 5120 5120 5120 5120 5120 50120 50120
\\_SB_.LNKC (references 1, priority 11500):
interrupts: 10 11 5 9 12 7 6 4 3 15 =
14
penalty: 120 140 170 240 5120 5120 5120 5120 5120 50120 50120
acpi link get: empty IRQ resource
acpi link set: _CRS failed for link \\_SB_.LNKB - AE_NULL_ENTRY
acpi link set: curr irq 0 !=3D 10 for \\_SB_.LNKB
atpic: Programming IRQ10 as level/low
pcib0: slot 2 INTB routed to irq 10 via \\_SB_.LNKB
found-> vendor=3D0x104c, dev=3D0xac1b, revid=3D0x03
bus=3D0, slot=3D2, func=3D1
class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1
cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords)
lattimer=3D0xa8 (5040 ns), mingnt=3D0xc0 (48000 ns), maxlat=3D0x03 (750 ns)
intpin=3Db, irq=3D10
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 50101000, size 8, enabled
map[14]: type 4, range 32, base 00004500, size 3, enabled
map[18]: type 4, range 32, base 00004400, size 8, enabled
pcib0: matched entry for 0.3.INTA (src \\_SB_.LNKC)
pcib0: possible interrupts: 3 4 5 6 7 9 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.LNKD (references 1, priority 11568):
interrupts: 11 10 5 9 12 7 6 4 3 15 =
14
penalty: 200 200 230 360 5180 5180 5180 5180 5180 50180 50180
\\_SB_.LNKC (references 1, priority 11568):
interrupts: 11 10 5 9 12 7 6 4 3 15 =
14
penalty: 200 200 230 360 5180 5180 5180 5180 5180 50180 50180
acpi link get: empty IRQ resource
acpi link set: _CRS failed for link \\_SB_.LNKC - AE_NULL_ENTRY
acpi link set: curr irq 0 !=3D 11 for \\_SB_.LNKC
pcib0: slot 3 INTA routed to irq 11 via \\_SB_.LNKC
found-> vendor=3D0x11c1, dev=3D0x0449, revid=3D0x01
bus=3D0, slot=3D3, func=3D0
class=3D07-80-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0107, statreg=3D0x8290, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0xfc (63000 ns), maxlat=3D0x0e (3500 ns)
intpin=3Da, irq=3D11
powerspec 2 supports D0 D2 D3 current D0
map[10]: type 1, range 32, base 50100000, size 12, enabled
map[14]: type 1, range 32, base 50000000, size 20, enabled
pcib0: matched entry for 0.6.INTA (src \\_SB_.LNKA)
pcib0: slot 6 INTA is already routed to irq 11
found-> vendor=3D0x1013, dev=3D0x6003, revid=3D0x01
bus=3D0, slot=3D6, func=3D0
class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0106, statreg=3D0x0410, cachelnsz=3D0 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x18 (6000 ns)
intpin=3Da, irq=3D11
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=3D0x8086, dev=3D0x7110, revid=3D0x02
bus=3D0, slot=3D7, func=3D0
class=3D06-80-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x000f, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
map[20]: type 4, range 32, base 0000fcf0, size 4, enabled
found-> vendor=3D0x8086, dev=3D0x7111, revid=3D0x01
bus=3D0, slot=3D7, func=3D1
class=3D01-01-80, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x30 (1440 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
map[20]: type 4, range 32, base 00004000, size 5, enabled
pcib0: matched entry for 0.7.INTD (src \\_SB_.LNKD)
pcib0: possible interrupts: 3 4 5 6 7 9 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.LNKD (references 1, priority 11634):
interrupts: 10 11 5 9 12 7 6 4 3 15 =
14
penalty: 260 270 290 480 5240 5240 5240 5240 5240 50240 50240
acpi link get: empty IRQ resource
acpi link set: _CRS failed for link \\_SB_.LNKD - AE_NULL_ENTRY
acpi link set: curr irq 0 !=3D 10 for \\_SB_.LNKD
pcib0: slot 7 INTD routed to irq 10 via \\_SB_.LNKD
found-> vendor=3D0x8086, dev=3D0x7112, revid=3D0x01
bus=3D0, slot=3D7, func=3D2
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x30 (1440 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Dd, irq=3D10
map[90]: type 4, range 32, base 0000efa0, size 4, enabled
found-> vendor=3D0x8086, dev=3D0x7113, revid=3D0x03
bus=3D0, slot=3D7, func=3D3
class=3D06-80-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0003, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0x40000000-0x43ffffff=
at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0x40000000
agp0: allocating GATT for aperture of size 64M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xd000-0xdfff
pcib1: memory decode 0x70000000-0xdfffffff
pcib1: prefetched decode 0xe0000000-0xf7ffffff
ACPI PCI link initial configuration:
\\_SB_.LNKA irq*11: [ 3 4 5 6 7 9 10 11 12 14 15] 0+ low,level,sharab=
le 1.0.0
\\_SB_.LNKB irq*10: [ 3 4 5 6 7 9 10 11 12 14 15] 0+ low,level,sharab=
le 1.0.1
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=3D1
map[10]: type 3, range 32, base e0000000, size 25, enabled
pcib1: device (null) requested decoded memory range 0xe0000000-0xe1ffffff
map[14]: type 1, range 32, base 70000000, size 22, enabled
pcib1: device (null) requested decoded memory range 0x70000000-0x703fffff
map[18]: type 1, range 32, base 70400000, size 20, enabled
pcib1: device (null) requested decoded memory range 0x70400000-0x704fffff
pcib1: matched entry for 1.0.INTA (src \\_SB_.LNKA)
pcib1: slot 0 INTA is already routed to irq 11
found-> vendor=3D0x10c8, dev=3D0x0006, revid=3D0x00
bus=3D1, slot=3D0, func=3D0
class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x80 (3840 ns), mingnt=3D0x10 (4000 ns), maxlat=3D0xff (63750 n=
s)
intpin=3Da, irq=3D11
powerspec 1 supports D0 D1 D2 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <TI1450 PCI-CardBus Bridge> mem 0x50103000-0x50103fff irq 11 at devic=
e 2.0 on pci0
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x50103000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0xac1b104c 0x02100007 0x06070003 0x0082a808=20
0x10: 0x50103000 0x020000a0 0xb0040200 0xfffff000=20
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc=20
0x30: 0x00000000 0x0000fffc 0x00000000 0x0740010b=20
0x40: 0x01301014 0x00000001 0x00000000 0x00000000=20
0x50: 0x00000000 0x00000000 0x00000000 0x00000000=20
0x60: 0x00000000 0x00000000 0x00000000 0x00000000=20
0x70: 0x00000000 0x00000000 0x00000000 0x00000000=20
0x80: 0x00449069 0x00000000 0x80818080 0x00001000=20
0x90: 0x416602c0 0x00000000 0x00000000 0x00000000=20
0xa0: 0x7e110001 0x00c00000 0x00000000 0x00000000=20
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000=20
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000=20
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000=20
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000=20
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000=20
cbb1: <TI1450 PCI-CardBus Bridge> mem 0x50102000-0x50102fff irq 10 at devic=
e 2.1 on pci0
cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x50102000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
0x00: 0xac1b104c 0x02100007 0x06070003 0x0082a808=20
0x10: 0x50102000 0x220000a0 0xb0070500 0xfffff000=20
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc=20
0x30: 0x00000000 0x0000fffc 0x00000000 0x0740020a=20
0x40: 0x01301014 0x00000001 0x00000000 0x00000000=20
0x50: 0x00000000 0x00000000 0x00000000 0x00000000=20
0x60: 0x00000000 0x00000000 0x00000000 0x00000000=20
0x70: 0x00000000 0x00000000 0x00000000 0x00000000=20
0x80: 0x00449069 0x00000000 0x80818080 0x00001000=20
0x90: 0x416602c0 0x00000000 0x00000000 0x00000000=20
0xa0: 0x7e110001 0x00c00000 0x00000000 0x00000000=20
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000=20
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000=20
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000=20
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000=20
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000=20
pci0: <simple comms> at device 3.0 (no driver attached)
csa0: <CS4280/CS4614/CS4622/CS4624/CS4630> mem 0x50000000-0x500fffff,0x5010=
0000-0x50100fff irq 11 at device 6.0 on pci0
csa: card is Thinkpad 600X/A20/T20
csa0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x50100000
csa0: Reserved 0x100000 bytes for rid 0x14 type 3 at 0x50000000
csa0: [GIANT-LOCKED]
pcm0: <CS461x PCM Audio> on csa0
pcm0: <Cirrus Logic CS4297A AC97 Codec (id =3D 0x43525913)>
pcm0: Codec features headphone, 20 bit DAC, 18 bit ADC, 6 bit master volume=
, Crystal Semi 3D Stereo Enhancement
pcm0: Primary codec extended features AMAP
pcm0: [GIANT-LOCKED]
pcm0: sndbuf_setmap 23d000, 1000; 0xc0fa9000 -> 23d000
pcm0: sndbuf_setmap 1db000, 1000; 0xc0fa7000 -> 1db000
PCI-ISA bridge with incorrect subclass 0x80
PCI-ISA bridge with incorrect subclass 0x80
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xfcf0-0xfcff,0x376,0x170-0x1=
77,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfcf0
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00
ata0-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata0-slave: stat=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata0: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=3D03 ostat0=3D51 ostat1=3D01
ata1-master: stat=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb
ata1-slave: stat=3D0x01 err=3D0x24 lsb=3D0x00 msb=3D0x00
ata1: reset tp2 stat0=3D00 stat1=3D01 devices=3D0x4<ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 7.2 (no driver attached)
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
unknown: not probed (disabled)
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on=
acpi0
fdc0: ic_type 90 part_id 73
sio0: irq maps: 0x601 0x611 0x601 0x601
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0: using extended I/O port range
ppc0: SPP
ppc0 port 0x3bc-0x3bf irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
unknown: not probed (disabled)
sio1: irq maps: 0x601 0x609 0x601 0x601
sio1 port 0x2f8-0x2ff irq 3 drq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0045
atkbd: keyboard ID 0x54ab (2)
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0045
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
acpi_cmbat0: <Control Method Battery> on acpi0
unknown: not probed (disabled)
acpi_acad0: <AC Adapter> on acpi0
unknown: not probed (disabled)
acpi_ec0: info: new max delay is 70 us
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sc: sc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
vga: vga0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=3D0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 498272951 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
Interrupt storm detected on "irq10: cbb1"; throttling interrupt source
cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_cmbat0: battery initialization start
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acpi_tz1: _AC0: temperature 39.8 >=3D setpoint 33.5
acpi_tz1: switched from NONE to _AC0: 39.8C
acpi_tz1: _AC0: temperature 39.8 >=3D setpoint 33.5
acpi_tz1: switched from NONE to _AC0: 39.8C
found-> vendor=3D0x115d, dev=3D0x0003, revid=3D0x03
bus=3D5, slot=3D0, func=3D0
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0000, statreg=3D0x0210, cachelnsz=3D8 (dwords)
lattimer=3D0xa8 (5040 ns), mingnt=3D0x14 (5000 ns), maxlat=3D0x28 (10000 n=
s)
intpin=3Da, irq=3D222
powerspec 1 supports D0 D1 D2 D3 current D0
dc0: <Xircom X3201 10/100BaseTX> port 0x1000-0x107f mem 0xd8000-0xd87ff,0xd=
8800-0xd8fff irq 10 at device 0.0 on cardbus1
miibus0: <MII bus> on dc0
tdkphy0: <TDK 78Q2120 media interface> on miibus0
tdkphy0: OUI 0x00c039, model 0x0014, rev. 11
tdkphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: bpf attached
dc0: Ethernet address: 00:10:a4:c0:c0:45
dc0: [GIANT-LOCKED]
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
ata0-master: pio=3D0x0c wdma=3D0x22 udma=3D0x44 cable=3D80pin
acpi_tz1: _AC0: temperature 39.8 >=3D setpoint 33.5
acpi_tz1: switched from NONE to _AC0: 39.8C
ata0-master: setting PIO4 on Intel PIIX4 chip
ata0-master: setting UDMA33 on Intel PIIX4 chip
ad0: <IBM-DARA-212000/AR4IA55A> ATA-4 disk at ata0-master
ad0: 11509MB (23572080 sectors), 24944 C, 15 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
GEOM: new disk ad0
ata1-master: pio=3D0x0c wdma=3D0x22 udma=3D0xffffffff cable=3D40pin
ATAPI_RESET time =3D 20us
ata1-master: setting PIO4 on Intel PIIX4 chip
acd0: <LG DVD-ROM DRN-8080B/1.13> DVDROM drive at ata1 as master
acd0: 512KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
[0] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/74/63 s:0 l:23572080
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 0 length 12068904960 end 12068904959
GEOM: Configure ad0a, start 0 length 134217728 end 134217727
GEOM: Configure ad0b, start 134217728 length 134217728 end 268435455
GEOM: Configure ad0c, start 0 length 12068904960 end 12068904959
GEOM: Configure ad0e, start 268435456 length 268435456 end 536870911
GEOM: Configure ad0f, start 536870912 length 268435456 end 805306367
GEOM: Configure ad0g, start 805306368 length 11263598592 end 12068904959
GEOM: Configure ad0s1a, start 0 length 134217728 end 134217727
GEOM: Configure ad0s1b, start 134217728 length 134217728 end 268435455
GEOM: Configure ad0s1c, start 0 length 12068904960 end 12068904959
GEOM: Configure ad0s1e, start 268435456 length 268435456 end 536870911
GEOM: Configure ad0s1f, start 536870912 length 268435456 end 805306367
GEOM: Configure ad0s1g, start 805306368 length 11263598592 end 12068904959
Mounting root from ufs:/dev/ad0a
start_init: trying /sbin/init
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
gif0: bpf attached
ipfw2 initialized, divert disabled, rule-based forwarding disabled, default=
to deny, logging disabled
Interrupt storm detected on "irq11: cbb0 csa0"; throttling interrupt source
--mxv5cy4qt+RJ9ypb--
--+xNpyl7Qekk2NvDX
Content-Type: application/pgp-signature
Content-Disposition: inline
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.5 (FreeBSD)
iD8DBQFBMjUKqRfpzJluFF4RAsYJAJwIjsR/hywA31NCKxJxGCtm/NTWBwCdGcuM
HyWxbpTbBCsJPJ7wEx8bNrU=
=Ert3
-----END PGP SIGNATURE-----
--+xNpyl7Qekk2NvDX--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040829195658.GA39813>