Date: Tue, 12 Apr 2005 23:14:45 -0400 (EDT) From: Mikhail Teterin <mi@corbulon.video-collage.com> To: stable@FreeBSD.org Subject: reliable "panic: isa_dmastart: bad bounce buffer" Message-ID: <200504130314.j3D3EjrT043747@corbulon.video-collage.com>
next in thread | raw e-mail | index | archive | help
--%--multipart-mixed-boundary-1.43715.1113362085--%
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Hello!
Whenever I try to mount a floppy disk:
mount -t msdosfs /dev/fd0 /mnt
I get:
panic: isa_dmastart: bad bounce buffer
The OS is FreeBSD-5.4-STABLE from last night, amd64. dmesg attached.
DR-DOS boots perfectly fine from this floppy...
Any ideas? Thanks!
-mi
--%--multipart-mixed-boundary-1.43715.1113362085--%
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Description: ASCII English text
Content-Disposition: attachment; filename="blue-dmesg.txt"
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-STABLE #0: Tue Apr 12 22:42:27 EDT 2005
root@blue.virtual-estates.net:/var/obj/var/src/sys/SILVER
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Opteron(tm) Processor 246 (2004.56-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0xf5a Stepping = 10
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory = 2147418112 (2047 MB)
avail memory = 2057740288 (1962 MB)
ACPI APIC Table: <A M I OEMAPIC >
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
acpi0: <A M I OEMXSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <Quadro FX 1000> mem 0xe0000000-0xe7ffffff,0xfd000000-0xfdffffff irq 16 at device 0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ohci0: <OHCI (generic) USB controller> mem 0xfe6fd000-0xfe6fdfff irq 19 at device 0.0 on pci2
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfe6fe000-0xfe6fefff irq 19 at device 0.1 on pci2
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x9800-0x98ff mem 0xfe6ff000-0xfe6fffff irq 16 at device 4.0 on pci2
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xfe6f8000-0xfe6fbfff,0xfe6fc800-0xfe6fcfff irq 18 at device 6.0 on pci2
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:00:00:00:00:f0:12
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:00:00:f0:12
fwe0: Ethernet address: 02:00:00:00:f0:12
fwe0: if_start running deferred for Giant
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ohci2: <NEC uPD 9210 USB controller> mem 0xfe6f6000-0xfe6f6fff irq 19 at device 7.0 on pci2
usb2: OHCI version 1.0
usb2: <NEC uPD 9210 USB controller> on ohci2
usb2: USB revision 1.0
uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
ohci3: <NEC uPD 9210 USB controller> mem 0xfe6f7000-0xfe6f7fff irq 16 at device 7.1 on pci2
usb3: OHCI version 1.0
usb3: <NEC uPD 9210 USB controller> on ohci3
usb3: USB revision 1.0
uhub3: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci2: <serial bus, USB> at device 7.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 8111 UDMA133 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 7.2 (no driver attached)
pci0: <bridge> at device 7.3 (no driver attached)
pcm0: <AMD-8111> port 0xcc00-0xcc3f,0xc800-0xc8ff irq 17 at device 7.5 on pci0
pcm0: <Avance Logic ALC655 AC97 Codec>
pcib3: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci3: <ACPI PCI bus> on pcib3
skc0: <Marvell Gigabit Ethernet> port 0xa800-0xa8ff mem 0xfe8fc000-0xfe8fffff irq 27 at device 3.0 on pci3
skc0: Marvell Yukon Lite Gigabit Ethernet rev. A3(0x7)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:00:00:04:a8:97
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
atapci1: <SiI 3114 SATA150 controller> port 0xa000-0xa00f,0xa080-0xa083,0xa400-0xa407,0xa480-0xa483,0xac00-0xac07 mem 0xfe8fbc00-0xfe8fbfff irq 25 at device 5.0 on pci3
ata2: channel #0 on atapci1
ata3: channel #1 on atapci1
ata4: channel #2 on atapci1
ata5: channel #3 on atapci1
pci0: <base peripheral, interrupt controller> at device 10.1 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci4: <ACPI PCI bus> on pcib4
ciss0: <HP Smart Array 642> port 0xb800-0xb8ff mem 0xfea80000-0xfeabffff,0xfeafe000-0xfeafffff irq 29 at device 1.0 on pci4
pci0: <base peripheral, interrupt controller> at device 11.1 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
isa_dmainit(2, 40960) failed
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <ISA Option ROMs> at iomem 0xdb000-0xdefff,0xd6800-0xdafff,0xce800-0xd67ff,0xc0000-0xce7ff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2004556009 Hz quality 800
Timecounters tick every 1.000 msec
acd0: DVDR <MATSHITADVD-RAM SW-9585/B100> at ata1-master PIO4
Waiting 8 seconds for SCSI devices to settle
Interrupt storm detected on "irq17: pcm0"; throttling interrupt source
da0 at ciss0 bus 0 target 0 lun 0
da0: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-0 device
da0: 135.168MB/s transfers
da0: 69419MB (142171680 512 byte sectors: 255H 32S/T 17423C)
cd0 at ahc0 bus 0 target 2 lun 0
cd0: <YAMAHA CRW4416S 1.0g> Removable CD-ROM SCSI-2 device
cd0: 8.333MB/s transfers (8.333MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
cd1 at ahc0 bus 0 target 5 lun 0
cd1: <NEC CD-ROM DRIVE:465 1.13> Removable CD-ROM SCSI-2 device
cd1: 20.000MB/s transfers (20.000MHz, offset 15)
cd1: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/da0s1a
WARNING: /var was not properly dismounted
--%--multipart-mixed-boundary-1.43715.1113362085--%--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200504130314.j3D3EjrT043747>