Date: Sat, 1 May 1999 21:18:21 +0200 (CEST) From: Nick Hibma <hibma@skylink.it> To: Jim Bloom <bloom@acm.org> Cc: Rick Whitesel <rwhitesel@nbase-xyplex.com>, erik@habatech.no, freebsd-current@FreeBSD.ORG Subject: Re: Problems with ahc (2940U2W) and USB Message-ID: <Pine.BSF.3.96.990501211708.7427A-100000@heidi.plazza.it> In-Reply-To: <3727AFE8.168D7178@acm.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Did I miss an update on this? Could you guys drop me the output of dmesg (after a boot -v if possible)? Cheers, Nick On Wed, 28 Apr 1999, Jim Bloom wrote: > Add me to the list of people seeing this problem. I have an ASUS P2B-S with > onboard Adaptec 7890. I have been seeing the problem on and off since December > of last year. One time it boots and the next time it doesn't. Once the disk is > hung, the reset switch or power cycling are the only ways to unfreeze it. > > I have seen this problem mentioned on both freebsd-current and freebsd-scsi > several times without a solution. I don't recall a link to USB being mentioned > before. > > I'll try to post my dmesg output later this tonight. > > Jim Bloom > bloom@acm.org > > > Rick Whitesel wrote: > > > > Hi: > > I am seeing the same thing on a ASUS P2B with a Adaptec 2940?? > > controller. > > > > Rick > > > > ----- Original Message ----- > > From: <erik@habatech.no> > > To: <freebsd-current@FreeBSD.ORG> > > Sent: Wednesday, April 28, 1999 11:38 AM > > Subject: Problems with ahc (2940U2W) and USB > > > > With the current sources, there seems to be a problem with the Adaptec > > 2940U2W driver when using USB. > > > > Whenever I try to boot a kernel with the USB driver, the boot process > > gets to the "Waiting 15 seconds for SCSI devices to settle" and stops. > > If I compile a kernel with an nearly identical config, only the USB > > driver has been commented out, it boots all right. > > > > My computer has a Spacewalker 661 mainboard, which is a 440BX based card. > > The SCSI controller is an Adaptec 2940U2W. > > > > Kernels compiled before the integration of new-bus works fine. > > > > Now, this is not a critical situation for me, as I have no USB devices, > > but I thought someone else would want this information. > > > > Anyone else experiencing this? > > > > -- > > --------------------------------+---------------------------------------+ > > Erik H. Bakke, Habatech AS | To be or not to be... | > > E-Mail: erik@habatech.no | Is simply a question of binary logic. | > > This message was sent by XFMail | | > > --------------------------------+---------------------------------------+ > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-current" in the body of the message > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-current" in the body of the message > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-current" in the body of the message > > -- e-Mail: hibma@skylink.it To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.990501211708.7427A-100000>