Date: Fri, 25 Mar 2005 12:13:02 +0200 From: Danny Braniss <danny@cs.huji.ac.il> To: Ruslan Ermilov <ru@freebsd.org> Cc: amd64@freebsd.org Subject: Re: testers wanted Message-ID: <E1DEloM-0009mS-M8@cs1.cs.huji.ac.il> In-Reply-To: Message from Ruslan Ermilov <ru@freebsd.org> of "Fri, 25 Mar 2005 11:46:18 %2B0200." <20050325094618.GA76747@ip.net.ua>
next in thread | previous in thread | raw e-mail | index | archive | help
> Hi DES, > > On Thu, Mar 24, 2005 at 02:43:04PM +0100, Dag-Erling Sm?rgrav wrote: > > I need someone with an nForce3-based Opteron box running -CURRENT to > > do the following: > >=20 > > - upgrade to a recent -CURRENT, verify that a GENERIC kernel with > > NO_MIXED_MODE removed works properly *with apic enabled* > >=20 > Looks like it works, though I got one TIMEOUT - WRITE_DMA with it. > I just used a stripped down GENERIC kernel with hw.apic.mixed_mode=3D1 > set in /boot/loader.conf, which has the same effect as above. > > > - build an unmodified GENERIC (*with* NO_MIXED_MODE) from the same > > sources and boot it *with apic enabled* > >=20 > Booted the same kernel with hw.apic.mixed_mode=3D0. It stalls > (see the attached logs). same here, but there seems to be a problem with the network: Trying to mount root from nfs: NFS ROOT: 132.65.16.100:/d/9 em0: Link is up 100 Mbps Full Duplex em0: link state changed to UP em0: Link is up 100 Mbps Full Duplex usb_new_device: set address 2 failed - trying a port reset em0: Link is up 100 Mbps Full Duplex usb_new_device: set address 2 failed - trying a port reset usb_new_device: set address 2 failed - trying a port reset em0: Link is up 100 Mbps Full Duplex usb_new_device: set address 2 failed uhub_explore: usb_new_device failed, error=SET_ADDR_FAILED uhub1: device problem (SET_ADDR_FAILED), disabling port 1 em0: Link is up 100 Mbps Full Duplex i'll disconnect the usb stuff now ... danny
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E1DEloM-0009mS-M8>