Date: Tue, 22 Jan 2008 20:50:47 +0000 From: Hugo Silva <hugo@barafranca.com> To: freebsd-stable@freebsd.org Subject: 7.0-RC1 ath0 will not work for more than a couple days (Access Point) Message-ID: <47965727.3040307@barafranca.com>
next in thread | raw e-mail | index | archive | help
re0: discard frame w/o packet header
re0: discard frame w/o packet header
re0: discard frame w/o packet header
re0: discard frame w/o packet header
re0: discard frame w/o packet header
re0: discard frame w/o packet header
re0: discard frame w/o packet header
re0: discard frame w/o packet header
re0: discard frame w/o packet header
re0: discard frame w/o packet header
re0: discard frame w/o packet header
re0: discard frame w/o packet header
re0: discard frame w/o packet header
re0: discard frame w/o packet header
re0: discard frame w/o packet header
re0: discard frame w/o packet header
re0: discard frame w/o packet header
re0: discard frame w/o packet header
ath0: stuck beacon; resetting (bmiss count 4)
ath0: ath_reset: unable to reset hardware; hal status 3
ath0: stuck beacon; resetting (bmiss count 4)
ath0: ath_reset: unable to reset hardware; hal status 3
ath0: device timeout
ath0: stuck beacon; resetting (bmiss count 4)
ath0: ath_reset: unable to reset hardware; hal status 3
ath0: device timeout
ath0: stuck beacon; resetting (bmiss count 4)
ath0: ath_reset: unable to reset hardware; hal status 3
ath0: device timeout
ath0: stuck beacon; resetting (bmiss count 4)
ath0: ath_reset: unable to reset hardware; hal status 3
ath0: stuck beacon; resetting (bmiss count 4)
ath0: ath_reset: unable to reset hardware; hal status 3
ath0: stuck beacon; resetting (bmiss count 4)
ath0: ath_reset: unable to reset hardware; hal status 3
ath0: stuck beacon; resetting (bmiss count 4)
ath0: ath_reset: unable to reset hardware; hal status 3
ath0: stuck beacon; resetting (bmiss count 4)
ath0: ath_reset: unable to reset hardware; hal status 3
ath0: device timeout
ath0: stuck beacon; resetting (bmiss count 4)
ath0: ath_reset: unable to reset hardware; hal status 3
ath0: stuck beacon; resetting (bmiss count 4)
ath0: ath_reset: unable to reset hardware; hal status 3
ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
inet 192.168.200.110 netmask 0xffffff00 broadcast 192.168.200.255
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g <hostap>
status: associated
ssid zaurak_wifi channel 5 (2432 Mhz 11g) bssid
authmode WPA2/802.11i privacy MIXED deftxkey 2 TKIP 2:128-bit
TKIP 3:128-bit txpower 31.5 scanvalid 60 bgscan bgscanintvl 300
bgscanidle 250 roam:rssi11g 7 roam:rate11g 5 pureg protmode CTS wme
burst hidessid -apbridge dtimperiod 1
FreeBSD zaurak.bsdlan.org 7.0-RC1 FreeBSD 7.0-RC1 #1: Wed Jan 2
01:45:03 WET 2008 klr@zaurak.bsdlan.org:/usr/obj/usr/src/sys/ZAURAK
amd64
ath0@pci0:5:1:0: class=0x020000 card=0x5a001385 chip=0x0013168c
rev=0x01 hdr=0x00
vendor = 'Atheros Communications Inc.'
device = 'AR5212, AR5213 802.11a/b/g Wireless Adapter'
class = network
subclass = ethernet
re0@pci0:5:4:0: class=0x020000 card=0x820d1043 chip=0x816710ec rev=0x10
hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RTL8169/8110 Family Gigabit Ethernet NIC'
class = network
subclass = ethernet
ifconfig'ing ath0 up and down continuously will either make it usable
again for a few hours or result in a panic.
Regards,
Hugo
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?47965727.3040307>