Date: Mon, 15 Dec 1997 01:18:31 -0800 From: Christopher Knight <merlin@ghostwheel.com> To: stable@freebsd.org Subject: sysinstall/qcam problem with 2.2-stable Message-ID: <3.0.5.32.19971215011831.00928cd0@amber.ghostwheel.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Greetings,
My first post to this mailing list...
I do not KNOW that this belongs here. I am posting here because I
have in the past used the kernel implementation of the qcam drivers
without the problems that I will described below. Since I just
became current with stable, it seemed that this is a good place to
start with my problem. Please direct me to the proper venue if my
plea for help does not belong here.
Two nights ago I brought myself current to -current with cvsup.
After updating my sources, I performed a make world and compiled
myself a new GENERIC kernel.
After I felt safe with this, I started tweaking. The first step
was removing all unused network, scsi and hd drivers from a copy of
GENERIC. No problems.
Next... I commented out the lpt0 driver and added the following
for qcam0:
#device lpt0 at isa? port? tty irq 7 vector lptintr
device qcam0 at isa? port "IO_LPT1"
Everything SEEMED to be fine. Until I ran /stand/sysinstall, the
following error was displayed:
Dec 15 00:28:28 amber /kernel: stray irq 7
OK, I modified the qcam0 device to snag irq 7 in the same manner
that was used for the now disabled lpt0:
device qcam0 at isa? port "IO_LPT1" tty irq 7
Now, when I try to run sysinstall, the following is displayed as the
system crashes:
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x0
fault code = supervisor read, page not present
instruction pointer = 0x8:0x0
stack pointer = 0x10:0xefbffe20
frame pointer = 0x10:0xefbffe78
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 203 (sysinstall)
interrupt mask = net tty
panic: page fault
Any help is appreciated!
- -ck
-----BEGIN PGP SIGNATURE-----
Version: PGP for Personal Privacy 5.0
Charset: noconv
iQA/AwUBNJT108UYx/eFxuGhEQLwpwCg6NQBBcEeGzvZkPJPn33pvmtJkPQAoLet
nAHvOQrYiQtJwTeEaLQJSNdW
=T0ss
-----END PGP SIGNATURE-----
[-- Attachment #2 --]
Dec 15 00:10:06 amber /kernel: FreeBSD 2.2.5-STABLE #0: Sun Dec 14 23:02:11 PST 1997
Dec 15 00:10:06 amber /kernel: merlin@amber.ghostwheel.com:/usr/src/sys/compile/CMK.2
Dec 15 00:10:06 amber /kernel: CPU: Pentium (166.19-MHz 586-class CPU)
Dec 15 00:10:06 amber /kernel: Origin = "GenuineIntel" Id = 0x52c Stepping=12
Dec 15 00:10:06 amber /kernel: Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
Dec 15 00:10:06 amber /kernel: real memory = 67108864 (65536K bytes)
Dec 15 00:10:06 amber /kernel: avail memory = 62730240 (61260K bytes)
Dec 15 00:10:06 amber /kernel: Probing for devices on PCI bus 0:
Dec 15 00:10:06 amber /kernel: chip0 <Intel 82439> rev 1 on pci0:0
Dec 15 00:10:06 amber /kernel: chip1 <Intel 82371SB PCI-ISA bridge> rev 0 on pci0:7:0
Dec 15 00:10:06 amber /kernel: chip2 <Intel 82371SB IDE interface> rev 0 on pci0:7:1
Dec 15 00:10:06 amber /kernel: vga0 <VGA-compatible display device> rev 227 int a irq 9 on pci0:17
Dec 15 00:10:06 amber /kernel: ahc0 <Adaptec 2940A Ultra SCSI host adapter> rev 1 int a irq 11 on pci0:19
Dec 15 00:10:06 amber /kernel: ahc0: aic7860 Single Channel, SCSI Id=7, 3 SCBs
Dec 15 00:10:06 amber /kernel: ahc0 waiting for scsi devices to settle
Dec 15 00:10:06 amber /kernel: (ahc0:0:0): "QUANTUM FIREBALL_TM2110S 300X" type 0 fixed SCSI 2
Dec 15 00:10:06 amber /kernel: sd0(ahc0:0:0): Direct-Access 2014MB (4124736 512 byte sectors)
Dec 15 00:10:06 amber /kernel: (ahc0:1:0): "FUJITSU M2624F-512 0405" type 0 fixed SCSI 1
Dec 15 00:10:06 amber /kernel: sd1(ahc0:1:0): Direct-Access 496MB (1015812 512 byte sectors)
Dec 15 00:10:06 amber /kernel: (ahc0:2:0): "QUANTUM LPS270S 590A" type 0 fixed SCSI 2
Dec 15 00:10:06 amber /kernel: sd2(ahc0:2:0): Direct-Access 258MB (528808 512 byte sectors)
Dec 15 00:10:06 amber /kernel: (ahc0:6:0): "TOSHIBA CD-ROM XM-3601TA 0725" type 5 removable SCSI 2
Dec 15 00:10:06 amber /kernel: cd0(ahc0:6:0): CD-ROM cd present [328222 x 2048 byte records]
Dec 15 00:10:07 amber /kernel: Probing for devices on the ISA bus:
Dec 15 00:10:07 amber /kernel: sc0 at 0x60-0x6f irq 1 on motherboard
Dec 15 00:10:07 amber /kernel: sc0: VGA color <16 virtual consoles, flags=0x0>
Dec 15 00:10:07 amber /kernel: sio0 at 0x3f8-0x3ff irq 4 on isa
Dec 15 00:10:07 amber /kernel: sio0: type 16550A
Dec 15 00:10:07 amber /kernel: sio1 at 0x2f8-0x2ff irq 3 on isa
Dec 15 00:10:07 amber /kernel: sio1: type 16550A
Dec 15 00:10:07 amber /kernel: fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
Dec 15 00:10:07 amber /kernel: fdc0: FIFO enabled, 8 bytes threshold
Dec 15 00:10:07 amber /kernel: fd0: 1.44MB 3.5in
Dec 15 00:10:07 amber /kernel: 1 3C5x9 board(s) on ISA found at 0x300
Dec 15 00:10:07 amber /kernel: ep0 at 0x300-0x30f irq 10 on isa
Dec 15 00:10:07 amber /kernel: ep0: aui/utp[*UTP*] address 00:20:af:76:2f:c7
Dec 15 00:10:07 amber /kernel: npx0 flags 0x1 on motherboard
Dec 15 00:10:07 amber /kernel: npx0: INT 16 interface
Dec 15 00:10:07 amber /kernel: qcam0 at 0x378 on isa
Dec 15 00:10:07 amber /kernel: qcam0: unidirectional parallel port
Dec 15 00:10:07 amber /kernel: Intel Pentium F00F detected, installing workaround
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3.0.5.32.19971215011831.00928cd0>