Date: Wed, 5 Dec 2007 09:09:34 +1100 From: Geoff Roberts <geoff@apro.com.au> To: freebsd-stable@freebsd.org Subject: 7.0 - ZFS Fatal trap 12 on shutdown Message-ID: <200712050909.35045.geoff@apro.com.au>
next in thread | raw e-mail | index | archive | help
--Boundary-00=_fAdVHhEyKaGvCjF Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Hi, I am getting the attached Fatal trap on shutdown. Whenever I create a zfs pool I get the error. eg: zpool create data da0s3a I am running FreeBSD 7 on a Supermicro 5015M-MT+ running an Intel Core2 Duo (E6700) CPU. MB Ref: http://www.supermicro.com/products/system/1U/5015/SYS-5015M-MT+.cfm I am also using a hardware raid setup using a 3ware 9650SE series controller. I have also attached dmesg output and fdisk output. I have the system hooked up to serial console output, so if there is any debugging steps that may help get to the bottom of this I should be able to help. I am trying to create the zfs pool on da0s3 or da0s3a - both cause the error. Kind regards, Geoff --Boundary-00=_fAdVHhEyKaGvCjF Content-Type: text/plain; charset="us-ascii"; name="FatalTrapSupermicro.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="FatalTrapSupermicro.txt" Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...1 1 1 1 0 0 0 done All buffers synced. Uptime: 50m27s Fatal trap 12: page fault while in kernel mode cpuid = 1; apic id = 01 fault virtual address = 0x0 fault code = supervisor write, page not present instruction pointer = 0x20:0xc043f90d stack pointer = 0x28:0xf2e9ebf4 frame pointer = 0x28:0xf2e9ec90 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 21 (swi2: cambio) trap number = 12 panic: page fault cpuid = 1 Uptime: 50m27s --Boundary-00=_fAdVHhEyKaGvCjF Content-Type: text/plain; charset="us-ascii"; name="dmesg.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg.txt" Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-BETA4 #0: Tue Dec 4 17:52:42 EST 2007 root@server2.someplace.com:/usr/obj/usr/src/sys/SERVER2 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz (2660.02-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100000<NX,LM> AMD Features2=0x1<LAHF> Cores per package: 2 real memory = 3220045824 (3070 MB) avail memory = 3149647872 (3003 MB) ACPI APIC Table: <PTLTD APIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard kbd1 at kbdmux0 acpi0: <PTLTD RSDT> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr a2a0a2a06000a2a device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr a2a0a2a06000a2a device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 3ware device driver for 9000 series storage controllers, version: 3.70.05.001 twa0: <3ware 9000 series Storage Controller> port 0x4000-0x40ff mem 0xe8000000-0xe9ffffff,0xea101000-0xea101fff,0xea100000-0xea100fff irq 16 at device 0.0 on pci1 twa0: [ITHREAD] twa0: INFO: (0x15: 0x1300): Controller details:: Model 9650SE-4LPML, 4 ports, Firmware FE9X 3.06.00.003, BIOS BE9X 3.06.00.002 pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci9: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci9 pci10: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 pci13: <ACPI PCI bus> on pcib4 em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0x5000-0x501f mem 0xea000000-0xea01ffff irq 16 at device 0.0 on pci13 em0: Using MSI interrupt em0: Ethernet address: 00:30:48:8c:02:58 em0: [FILTER] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 pci14: <ACPI PCI bus> on pcib5 em1: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0x6000-0x601f mem 0xea200000-0xea21ffff irq 17 at device 0.0 on pci14 em1: Using MSI interrupt em1: Ethernet address: 00:30:48:8c:02:59 em1: [FILTER] uhci0: <UHCI (generic) USB controller> port 0x3000-0x301f irq 23 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0x3020-0x303f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0x3040-0x305f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered uhci3: <UHCI (generic) USB controller> port 0x3060-0x307f irq 16 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb3: <UHCI (generic) USB controller> on uhci3 usb3: USB revision 1.0 uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xea700000-0xea7003ff irq 23 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4 uhub4: 8 ports with 8 removable, self powered pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci15: <ACPI PCI bus> on pcib6 vgapci0: <VGA-compatible display> port 0x7000-0x70ff mem 0xe0000000-0xe7ffffff,0xea400000-0xea40ffff irq 16 at device 0.0 on pci15 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30a0-0x30af at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] atapci1: <Intel ICH7 SATA300 controller> port 0x30e8-0x30ef,0x30dc-0x30df,0x30e0-0x30e7,0x30d8-0x30db,0x30b0-0x30bf mem 0xea700400-0xea7007ff irq 19 at device 31.2 on pci0 atapci1: [ITHREAD] ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A, console sio0: [FILTER] sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A sio1: [FILTER] fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: does not respond device_attach: fdc0 attach returned 6 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: does not respond device_attach: fdc0 attach returned 6 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xcb000-0xcc7ff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] Timecounters tick every 1.000 msec acd0: CDROM <CD-224E-N/1.AA> at ata0-master UDMA33 SMP: AP CPU #1 Launched! da0 at twa0 bus 0 target 0 lun 0 da0: <AMCC 9650SE-4LP DISK 3.06> Fixed Direct Access SCSI-5 device da0: 100.000MB/s transfers da0: 238408MB (488259584 512 byte sectors: 255H 63S/T 30392C) Trying to mount root from ufs:/dev/da0s1a WARNING: ZFS is considered to be an experimental feature in FreeBSD. ZFS filesystem version 6 ZFS storage pool version 6 em0: link state changed to UP --Boundary-00=_fAdVHhEyKaGvCjF Content-Type: text/plain; charset="us-ascii"; name="fdisk.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="fdisk.txt" ******* Working on device /dev/da0 ******* parameters extracted from in-core disklabel are: cylinders=30392 heads=255 sectors/track=63 (16065 blks/cyl) Figures below won't work with BIOS for partitions not in cyl 1 parameters to be used for BIOS calculations are: cylinders=30392 heads=255 sectors/track=63 (16065 blks/cyl) Media sector size is 512 Warning: BIOS sector numbering starts with sector 1 Information from DOS bootblock is: The data for partition 1 is: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) start 63, size 83875302 (40954 Meg), flag 80 (active) beg: cyl 0/ head 1/ sector 1; end: cyl 1023/ head 254/ sector 63 The data for partition 2 is: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) start 83875365, size 62910540 (30718 Meg), flag 0 beg: cyl 1023/ head 255/ sector 63; end: cyl 1023/ head 254/ sector 63 The data for partition 3 is: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) start 146785905, size 341461575 (166729 Meg), flag 0 beg: cyl 1023/ head 255/ sector 63; end: cyl 1023/ head 254/ sector 63 The data for partition 4 is: <UNUSED> --Boundary-00=_fAdVHhEyKaGvCjF--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200712050909.35045.geoff>