Date: Tue, 30 Nov 1999 16:29:53 -0500 (EST) From: Eric Ogren <eogren@earthlink.net> To: "Matthew N. Dodd" <winter@jurai.net> Cc: freebsd-current@FreeBSD.ORG Subject: Re: ep driver troubles Message-ID: <Pine.BSF.4.20.9911301627580.260-100000@rod.darktech.org> In-Reply-To: <Pine.BSF.4.20.9911300052440.7305-100000@sasami.jurai.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 30 Nov 1999, Matthew N. Dodd wrote: > On Mon, 29 Nov 1999, Eric Ogren wrote: > > > Already there.... (I can attach my entire config file / dmesg output > > to anyone who wants to see it, but I didn't want to dump the whole > > thing to the list). > > How about the output of 'pnpinfo'? > > Apply this patch: ftp://ftp.jurai.net/users/winter/patches/if_ep.patch Well, after applying the patch, I don't see anything about a PnP card detected- in fact, dmesg | grep -i ep now shows nothing. Pnpinfo seems to indicate that it's not seeing the card either. Maybe I just configured it wrong? [will play around in the dos cfg program and see what I can find] Eric [pnpinfo result below]: Checking for Plug-n-Play devices... Card assigned CSN #1 Vendor ID ADS7181 (0x81719304), Serial Number 0xffffffff PnP Version 1.0, Vendor Version 32 Device Description: Analog Devices AD1816A Logical Device ID: ADS7180 0x80719304 #0 Device supports I/O Range Check TAG Start DF Good Configuration IRQ: 5 7 - only one type (true/edge) DMA: channel(s) 1 8-bit, not a bus master, count by byte, , Type F DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Type F I/O Range 0x220 .. 0x240, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x388 .. 0x388, alignment 0x8, len 0x4 [16-bit addr] I/O Range 0x500 .. 0x560, alignment 0x10, len 0x10 [16-bit addr] TAG Start DF IRQ: 5 7 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Type F DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Type F I/O Range 0x220 .. 0x240, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x388 .. 0x388, alignment 0x8, len 0x4 [16-bit addr] I/O Range 0x500 .. 0x560, alignment 0x10, len 0x10 [16-bit addr] TAG Start DF IRQ: 5 7 9 10 11 15 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Type F DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Type F I/O Range 0x220 .. 0x2e0, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x388 .. 0x3b8, alignment 0x8, len 0x4 [16-bit addr] I/O Range 0x500 .. 0x560, alignment 0x10, len 0x10 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 5 7 9 10 11 15 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Type F DMA: channel(s) 8-bit, not a bus master, count by byte, , Type F I/O Range 0x220 .. 0x2e0, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x388 .. 0x3b8, alignment 0x8, len 0x4 [16-bit addr] I/O Range 0x500 .. 0x560, alignment 0x10, len 0x10 [16-bit addr] TAG End DF Logical Device ID: ADS7181 0x81719304 #1 Device supports I/O Range Check Compatible Device ID: PNPb006 (06b0d041) TAG Start DF Good Configuration IRQ: 5 7 9 11 - only one type (true/edge) I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 [16-bit addr] TAG Start DF IRQ: 5 7 9 10 11 15 - only one type (true/edge) I/O Range 0x300 .. 0x420, alignment 0x30, len 0x2 [16-bit addr] TAG End DF Logical Device ID: ADS7182 0x82719304 #2 Device supports I/O Range Check Compatible Device ID: PNPb02f (2fb0d041) TAG Start DF Good Configuration I/O Range 0x200 .. 0x200, alignment 0x8, len 0x8 [16-bit addr] TAG Start DF I/O Range 0x200 .. 0x208, alignment 0x8, len 0x8 [16-bit addr] TAG End DF End Tag Successfully got 48 resources, 3 logical fdevs -- card select # 0x0001 CSN ADS7181 (0x81719304), Serial Number 0xffffffff Logical device #0 IO: 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220 IRQ 5 0 DMA 1 0 IO range check 0x00 activate 0x01 Logical device #1 IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 7 0 DMA 4 4 IO range check 0x00 activate 0x01 Logical device #2 IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 0 0 DMA 4 4 IO range check 0x00 activate 0x01 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.20.9911301627580.260-100000>