Date: Mon, 1 May 2000 19:48:45 -0400 (EDT) From: Dennis Jun <cappy@cr173116-a.etob1.on.wave.home.com> To: freebsd-stable@freebsd.org, freebsd-questions@freebsd.org Subject: VIA 82C596 ATA66 support? Message-ID: <Pine.BSF.4.21.0005011922120.1931-100000@cr173116-a.etob1.on.wave.home.com>
next in thread | raw e-mail | index | archive | help
Hello! I recently purchased a new system with the Soyo SY-6VBA 133 motherboard and a IBM Deskstar 34GXP 20.5gig 7200rpm ATA66 IDE drive. That motherboard has the VIA 693A Chipset but in FreeBSD reports it as the VIA 82C596 chipset. In any event, the VIA chipset supports ATA66 drives however, it seems to me that FreeBSD doesn't support that chipset. I installed FreeBSD STABLE a few weeks back and it only allows ATA33 support. Have I done something wrong? or is this chipset not supported as of yet? (Oh yes, I have used the proper ATA66 and my bios settings are correct. Furthermore, I am a FreeBSD newbie, so please bare with me if this question is obvious. Many thanx in advance.) http://www.soyo.com.tw/product/6vba133.htm http://www.storage.ibm.com/hardsoft/diskdrdl/desk/ds34gxp.htm bash-2.03$ uname -a FreeBSD bruce 4.0-20000408-STABLE FreeBSD 4.0-20000408-STABLE #0: Sat Apr 8 11:58:19 GMT 2000 root@usw3.freebsd.org:/usr/src/sys/compile/GENERIC i386 bash-2.03$ dmesg Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-20000408-STABLE #0: Sat Apr 8 11:58:19 GMT 2000 root@usw3.freebsd.org:/usr/src/sys/compile/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon (735.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x681 Stepping = 1 Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,XMM> real memory = 134217728 (131072K bytes) avail memory = 126705664 (123736K bytes) Preloaded elf kernel "kernel" at 0xc03c3000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib2 pci1: <VGA-compatible display device> at 0.0 irq 11 isab0: <VIA 82C596B PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C596 ATA33 controller> port 0xe000-0xe00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xe800-0xe81f irq 10 at device 18.0 on pci0 ed0: supplying EUI64: 00:c0:a8:ff:fe:50:a5:10 ed0: address 00:c0:a8:50:a5:10, type NE2000 (16 bit) pcib1: <Host to PCI bridge> on motherboard pci2: <PCI bus> on pcib1 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: parallel port not found. ad0: 19574MB <IBM-DPTA-372050> [42421/15/63] at ata0-master using UDMA33 acd0: CDROM <HITACHI CDR-8130> at ata1-master using PIO4 Mounting root from ufs:/dev/ad0s1a ed0: starting DAD for fe80:0001::02c0:a8ff:fe50:a510 ed0: DAD complete for fe80:0001::02c0:a8ff:fe50:a510 - no duplicates found To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0005011922120.1931-100000>