Date: Mon, 7 Aug 2000 18:58:25 -0700 (PDT) From: kbyanc@posi.net To: FreeBSD-gnats-submit@freebsd.org Subject: misc/20475: SES/SAF-TE giving bogus temps on JMR ELEC FORTRA SERIES. 1.00 Message-ID: <200008080158.SAA24655@kbyanc.corp.ONElist.com>
next in thread | raw e-mail | index | archive | help
>Number: 20475 >Category: misc >Synopsis: SES/SAF-TE giving bogus temps on JMR ELEC FORTRA SERIES. 1.00 >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: change-request >Submitter-Id: current-users >Arrival-Date: Mon Aug 07 19:00:03 PDT 2000 >Closed-Date: >Last-Modified: >Originator: Kelly Yancey >Release: FreeBSD 4.1-STABLE i386 >Organization: eGroups.com -- http://www.eGroups.com/ >Environment: FreeBSD oralog.onelist.org 4.1-STABLE FreeBSD 4.1-STABLE #4: Mon Aug 7 17:21:44 PDT 2000 root@oralog.onelist.org:/usr/src/sys/compile/LOGS i386 >Description: Status bytes from getencstat say the disks are 456.8F (236C)! Output of getencstat: /dev/ses0: Enclosure Status <CRITICAL> Element 0x0: Cooling element OK (Status=ok (bytes=0x01 0x00 0x00 0x07)) Element 0x1: Cooling element OK (Status=ok (bytes=0x01 0x00 0x00 0x07)) Element 0x2: Power supply OK (Status=ok (bytes=0x01 0x00 0x00 0x20)) Element 0x3: Power supply OK (Status=ok (bytes=0x01 0x00 0x00 0x20)) Element 0x4: Audible alarm OK (Status=ok (bytes=0x01 0x00 0x00 0x00)) Element 0x5: Temperature sensors, Status=critical (bytes=0x02 0x00 0x5b 0x08) Element 0x6: Temperature sensors, Status=critical (bytes=0x02 0x00 0xf6 0x02) Element 0x7: Temperature sensors, Status=critical (bytes=0x02 0x00 0xf6 0x02) Element 0x8: Temperature sensors, Status=critical (bytes=0x02 0x00 0xf6 0x02) Element 0x9: Temperature sensors, Status=critical (bytes=0x02 0x00 0xf6 0x02) Element 0xa: Temperature sensors, Status=critical (bytes=0x02 0x00 0xf6 0x02) Element 0xb: Temperature sensors, Status=critical (bytes=0x02 0x00 0xf6 0x02) Element 0xc: Temperature sensors, Status=critical (bytes=0x02 0x00 0xf6 0x02) Element 0xd: Temperature sensors, Status=critical (bytes=0x02 0x00 0xf6 0x02) Element 0xe: Temperature sensors, Status=critical (bytes=0x02 0x00 0xf6 0x02) Element 0xf: Temperature sensors OK (Status=ok (bytes=0x01 0x00 0x00 0x00)) Element 0x10: Temperature sensors OK (Status=ok (bytes=0x01 0x00 0x00 0x00)) Element 0x11: Temperature sensors OK (Status=ok (bytes=0x01 0x00 0x00 0x00)) Element 0x12: Temperature sensors OK (Status=ok (bytes=0x01 0x00 0x00 0x00)) Element 0x13: Temperature sensors OK (Status=ok (bytes=0x01 0x00 0x00 0x00)) Element 0x14: Temperature sensors OK (Status=ok (bytes=0x01 0x00 0x00 0x00)) Element 0x15: Temperature sensors OK (Status=ok (bytes=0x01 0x00 0x00 0x00)) Element 0x16: Temperature sensors OK (Status=ok (bytes=0x01 0x00 0x00 0x00)) Element 0x17: Temperature sensors OK (Status=ok (bytes=0x01 0x00 0x00 0x00)) Element 0x18: Temperature sensors OK (Status=ok (bytes=0x01 0x00 0x00 0x00)) Element 0x19: Temperature sensors OK (Status=ok (bytes=0x01 0x00 0x00 0x00)) Element 0x1a: Temperature sensors OK (Status=ok (bytes=0x01 0x00 0x00 0x00)) Element 0x1b: Temperature sensors OK (Status=ok (bytes=0x01 0x00 0x00 0x00)) Element 0x1c: Temperature sensors OK (Status=ok (bytes=0x01 0x00 0x00 0x00)) Element 0x1d: Temperature sensors OK (Status=ok (bytes=0x01 0x00 0x00 0x00)) Element 0x1e: Temperature sensors OK (Status=ok (bytes=0x01 0x00 0x00 0x00)) Element 0x1f: Audible alarm OK (Status=ok (bytes=0x01 0x00 0x00 0x00)) Element 0x20: Device OK (Status=ok (bytes=0x01 0x00 0x00 0x00)) Element 0x21: Device OK (Status=ok (bytes=0x01 0x01 0x00 0x00)) Element 0x22: Device OK (Status=ok (bytes=0x01 0x02 0x00 0x00)) Element 0x23: Device OK (Status=ok (bytes=0x01 0x03 0x00 0x00)) Element 0x24: Device OK (Status=ok (bytes=0x01 0x04 0x00 0x00)) Element 0x25: Device OK (Status=ok (bytes=0x01 0x05 0x00 0x00)) Element 0x26: Device OK (Status=ok (bytes=0x01 0x06 0x00 0x00)) Element 0x27: Device OK (Status=ok (bytes=0x01 0x07 0x00 0x00)) Element 0x28: Device OK (Status=ok (bytes=0x01 0x08 0x00 0x00)) Element 0x29: Device OK (Status=ok (bytes=0x01 0x09 0x00 0x00)) dmesg from boot -v: Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.1-STABLE #4: Mon Aug 7 17:21:44 PDT 2000 root@oralog.onelist.org:/usr/src/sys/compile/LOGS Calibrating clock(s) ... TSC clock: 367516912 Hz, i8254 clock: 1193237 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium II/Pentium II Xeon/Celeron (367.50-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x665 Stepping = 5 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA T,PSE36,MMX,FXSR> real memory = 134152192 (131008K bytes) Physical memory chunk(s): 0x00001000 - 0x0009ffff, 651264 bytes (159 pages) 0x002ee000 - 0x07fe7fff, 131047424 bytes (31994 pages) fb: new array size 4 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 avail memory = 127586304 (124596K bytes) bios32: Found BIOS32 Service Directory header at 0xc00faeb0 bios32: Entry = 0xfb330 (c00fb330) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xb360 pnpbios: Found PnP BIOS data at 0xc00fbf00 pnpbios: Entry = f0000:bf28 Rev = 1.0 Other BIOS signatures found: ACPI: 000f6a70 Preloaded elf kernel "kernel" at 0xc02d5000. Pentium Pro MTRR support enabled pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71928086) npx0: <math processor> on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71928086) pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard found-> vendor=0x8086, dev=0x7192, revid=0x03 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base e0000000, size 26 found-> vendor=0x8086, dev=0x7110, revid=0x02 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7111, revid=0x01 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000f000, size 4 found-> vendor=0x8086, dev=0x7112, revid=0x01 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=11 map[20]: type 1, range 32, base 0000e000, size 5 found-> vendor=0x8086, dev=0x7113, revid=0x02 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[90]: type 1, range 32, base 00005000, size 4 found-> vendor=0x8086, dev=0x1229, revid=0x05 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base e8102000, size 12 map[14]: type 1, range 32, base 0000e400, size 5 map[18]: type 1, range 32, base e8000000, size 20 found-> vendor=0x102c, dev=0x00c0, revid=0x64 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=255 map[10]: type 1, range 32, base e5000000, size 24 found-> vendor=0x1000, dev=0x000c, revid=0x01 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[10]: type 1, range 32, base 0000e800, size 8 map[14]: type 1, range 32, base e8100000, size 8 map[18]: type 1, range 32, base e8101000, size 12 pci0: <PCI bus> on pcib0 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000 ata0: mask=03 status0=50 status1=00 ata0: mask=03 status0=50 status1=00 ata0: devices = 0x1 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008 ata1: mask=00 status0=a5 status1=a5 ata1: probe allocation failed pci0: <Intel 82371AB/EB (PIIX4) USB controller> (vendor=0x8086, dev=0x7112) at 7.2 irq 11 chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xe400-0xe41f mem 0xe8000000-0xe80fffff,0xe8102000-0xe8102fff irq 11 at device 11.0 on pci0 fxp0: Ethernet address 00:50:08:00:28:e0 bpf: fxp0 attached pci0: <Chips & Technologies 69000 SVGA controller> (vendor=0x102c, dev=0x00c0) at 12.0 sym0: <895> port 0xe800-0xe8ff mem 0xe8101000-0xe8101fff,0xe8100000-0xe81000ff i rq 10 at device 19.0 on pci0 sym0: Tekram NVRAM, ID 7, Fast-40, LVD, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ata-: ata0 exists, using next available unit number isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: current command byte:0067 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 05 a0 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sc0: fb0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x441 0x451 0x441 0x441 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1: irq maps: 0x441 0x449 0x441 0x441 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppi0: <Parallel I/O> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port isa_probe_children: probing PnP devices BIOS Geometries: 0:030ffe3f 0..783=784 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: lo0 attached ata0-master: success setting up UDMA2 mode on PIIX4 chip ad0: <ST36421A/6.01> ATA-4 disk at ata0 as master ad0: 6150MB (12596850 sectors), 13330 cyls, 15 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=4 dmamode=2 udmamode=2 cblid=1 Creating DISK ad0 Creating DISK wd0 Waiting 5 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. (probe0:sym0:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe0:sym0:0:0:0): ILLEGAL REQUEST asc:24,0 (probe0:sym0:0:0:0): Invalid field in CDB (probe0:sym0:0:0:1): Vendor Specific Command. CDB: 1a 20 a 0 14 0 (probe0:sym0:0:0:1): ILLEGAL REQUEST asc:20,0 (probe0:sym0:0:0:1): Invalid command operation code (probe0:sym0:0:0:1): INQUIRY. CDB: 12 21 80 0 ff 0 (probe0:sym0:0:0:1): ILLEGAL REQUEST asc:24,0 (probe0:sym0:0:0:1): Invalid field in CDB Creating DISK da0 pass0 at sym0 bus 0 target 0 lun 0 pass0: <CHAPTEC G5312 GV22> Fixed Direct Access SCSI-2 device pass0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabl ed pass1 at sym0 bus 0 target 0 lun 1 pass1: <CHAPTEC G5312 GV22> Fixed Processor SCSI-2 device pass1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabl ed pass2 at sym0 bus 0 target 5 lun 0 pass2: <JMR ELEC FORTRA SERIES. 1.00> Fixed Processor SCSI-2 device pass2: Serial Number 1 pass2: 3.300MB/s transfers ses0 at sym0 bus 0 target 5 lun 0 ses0: <JMR ELEC FORTRA SERIES. 1.00> Fixed Processor SCSI-2 device ses0: Serial Number 1 ses0: 3.300MB/s transfers ses0: SAF-TE Compliant Device pass1 at sym0 bus 0 target 0 lun 1 pass1: <CHAPTEC G5312 GV22> Fixed Processor SCSI-2 device pass1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled da0 at sym0 bus 0 target 0 lun 0 da0: <CHAPTEC G5312 GV22> Fixed Direct Access SCSI-2 device da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled da0: 277227MB (567761920 512 byte sectors: 255H 63S/T 35341C) Mounting root from ufs:/dev/ad0s1a ad0s1: type 0xa5, start 63, end = 12594959, size 12594897 : OK start_init: trying /sbin/init da0s1: type 0xa5, start 0, end = 567761919, size 567761920 : OK da0s1: type 0xa5, start 0, end = 567761919, size 567761920 : OK ses0: Nfans 2 Npwr 2 Nslots 10 Lck 0 Ntherm 10 Nspkrs 1 >How-To-Repeat: >Fix: >Release-Note: >Audit-Trail: >Unformatted: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200008080158.SAA24655>