Date: 30 Nov 2000 14:27:17 -0000 From: vladimir@math.uic.edu To: jose@we.lc.ehu.es, vladimir@math.uic.edu Cc: freebsd-stable@FreeBSD.ORG Subject: Re: Dell laptop and APM Message-ID: <20001130142717.26799.qmail@math.uic.edu>
next in thread | raw e-mail | index | archive | help
Thanks, will do. I assume I'll need 'flags 0x0020' for the
apm line in the kernel config?
Also, I forgot to mention that the laptop is running in the docking
station. I will try the patches when it is docked and standalone.
Thanks,
Vladimir
>From jose@we.lc.ehu.es Thu Nov 30 09:58:54 2000
>Delivered-To: vladimir@math.uic.edu
>Date: Thu, 30 Nov 2000 10:53:29 +0100
>From: "Jose M. Alcaide" <jose@we.lc.ehu.es>
>X-Accept-Language: es-ES, es, en-US, en
>MIME-Version: 1.0
>To: vladimir@math.uic.edu
>CC: freebsd-stable@FreeBSD.ORG
>Subject: Re: Dell laptop and APM
>
>This is a multi-part message in MIME format.
>--------------CD66A4288BC817CE5D58A36D
>Content-Type: text/plain; charset=us-ascii
>Content-Transfer-Encoding: 7bit
>
>vladimir@math.uic.edu wrote:
>>
>> I just bought a Dell-Latitude laptop. I have problems with APM on that
>> machine. Whe I type 'zzz', the monitor becomes black, then the screen
>> comes on again. The logs say:
>>
>> Nov 29 19:18:40 d50-38c9 /kernel: resumed from suspended mode (slept 00:00:00)
>> Nov 29 19:18:40 d50-38c9 /kernel: ata0: resetting devices .. done
>>
>> APM is enabled in the kernel:
>> device apm0 at nexus? flags 0x0020 # Advanced Power Management
>> (I've also tried
>> device apm0 at nexus? flags 0x20 # Advanced Power Management
>> ).
>>
>
>Apply the patchset attached, rebuild the kernel and please tell me
>if your problem goes away or not. The patches apply cleanly on 4.2-RELEASE
>and 4.2-STABLE, and they also should apply to 4.1-R and 4.1.1-R.
>
>In addition, your /etc/rc.conf should define
> apm_enable="YES"
> apmd_enable="YES"
>
>Cheers,
>-- JMA
>****** Jose M. Alcaide // jose@we.lc.ehu.es // jmas@FreeBSD.org ******
>** "Beware of Programmers who carry screwdrivers" -- Leonard Brandwein **
>--------------CD66A4288BC817CE5D58A36D
>Content-Type: text/plain; charset=us-ascii;
> name="statclock.patch"
>Content-Transfer-Encoding: 7bit
>Content-Disposition: inline;
> filename="statclock.patch"
>
>--- sys/i386/isa/clock.c.orig Tue Jan 4 23:24:59 2000
>+++ sys/i386/isa/clock.c Thu May 25 23:23:57 2000
>@@ -132,7 +132,6 @@
> int clkintr_pending;
> int disable_rtc_set; /* disable resettodr() if != 0 */
> volatile u_int idelayed;
>-int statclock_disable;
> u_int stat_imask = SWI_CLOCK_MASK;
> #ifndef TIMER_FREQ
> #define TIMER_FREQ 1193182
>@@ -828,6 +827,27 @@
> }
>
> /*
>+ * The following two functions are called from apm.c for stopping and
>+ * restarting the statclock interrupts from the RTC, if the apm's
>+ * broken_statclock flag is set (some laptops don't enter suspend mode
>+ * while the RTC is generating interrupts).
>+ */
>+void
>+statclock_stop(void)
>+{
>+ /* disable RTC interrupts and clear any pending one */
>+ writertc(RTC_STATUSB, RTCSB_24HR);
>+ rtcin(RTC_INTR);
>+}
>+
>+void
>+statclock_restart(void)
>+{
>+ /* re-enable the RTC interrupts */
>+ writertc(RTC_STATUSB, rtc_statusb);
>+}
>+
>+/*
> * Initialize the time of day register, based on the time base which is, e.g.
> * from a filesystem.
> */
>@@ -975,20 +995,9 @@
> struct intrec *clkdesc;
> #endif /* APIC_IO */
>
>- if (statclock_disable) {
>- /*
>- * The stat interrupt mask is different without the
>- * statistics clock. Also, don't set the interrupt
>- * flag which would normally cause the RTC to generate
>- * interrupts.
>- */
>- stat_imask = HWI_MASK | SWI_MASK;
>- rtc_statusb = RTCSB_24HR;
>- } else {
>- /* Setting stathz to nonzero early helps avoid races. */
>- stathz = RTC_NOPROFRATE;
>- profhz = RTC_PROFRATE;
>- }
>+ /* Setting stathz to nonzero early helps avoid races. */
>+ stathz = RTC_NOPROFRATE;
>+ profhz = RTC_PROFRATE;
>
> /* Finish initializing 8253 timer 0. */
> #ifdef APIC_IO
>@@ -1022,10 +1031,8 @@
> /* Initialize RTC. */
> writertc(RTC_STATUSA, rtc_statusa);
> writertc(RTC_STATUSB, RTCSB_24HR);
>+ rtcin(RTC_INTR); /* clear any pending interrupt */
>
>- /* Don't bother enabling the statistics clock. */
>- if (statclock_disable)
>- return;
> diag = rtcin(RTC_DIAG);
> if (diag != 0)
> printf("RTC BIOS diagnostic error %b\n", diag, RTCDG_BITS);
>--- sys/i386/include/clock.h.orig Wed Dec 29 05:32:58 1999
>+++ sys/i386/include/clock.h Thu May 25 23:26:45 2000
>@@ -16,7 +16,6 @@
> */
> extern int adjkerntz;
> extern int disable_rtc_set;
>-extern int statclock_disable;
> extern u_int timer_freq;
> extern int timer0_max_count;
> extern u_int tsc_freq;
>@@ -45,6 +44,8 @@
> #endif
> int sysbeep __P((int pitch, int period));
> void i8254_restore __P((void));
>+void statclock_stop __P((void));
>+void statclock_restart __P((void));
>
> #endif /* _KERNEL */
>
>--- sys/i386/apm/apm.c.orig Sun Feb 6 15:57:05 2000
>+++ sys/i386/apm/apm.c Thu May 25 23:39:03 2000
>@@ -101,6 +101,8 @@
> /* bmaj */ -1
> };
>
>+static int broken_statclock = 0;
>+
> static int apm_suspend_delay = 1;
> static int apm_standby_delay = 1;
>
>@@ -404,6 +406,8 @@
>
> /* modified for adjkerntz */
> pl = splsoftclock();
>+ if (broken_statclock) /* restart statclock if broken */
>+ statclock_restart();
> i8254_restore(); /* restore timer_freq and hz */
> inittodr(0); /* adjust time to RTC */
> microtime(&resume_time);
>@@ -450,6 +454,8 @@
> inittodr(0);
> microtime(&suspend_time);
> timevalsub(&diff_time, &suspend_time);
>+ if (broken_statclock) /* stop statclock if broken */
>+ statclock_stop();
> splx(pl);
> return 0;
> }
>@@ -1003,7 +1009,7 @@
> flags = 0;
>
> if (flags & 0x20)
>- statclock_disable = 1;
>+ broken_statclock = 1;
>
> sc->initialized = 0;
>
>
>--------------CD66A4288BC817CE5D58A36D--
>
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20001130142717.26799.qmail>