Date: Fri, 06 Jul 2001 09:38:14 -0700 From: "Greg Smith" <freebsd_mail@yahoo.com> To: Tomi.Vainio@Sun.COM Cc: freebsd-mobile@freebsd.org Subject: Re: Nokia C110 WLAN Message-ID: <200107060938140560.0022D9C8@smtp.mail.yahoo.com> In-Reply-To: <15171.26193.676993.450713@gargle.gargle.HOWL> References: <15171.26193.676993.450713@gargle.gargle.HOWL>
next in thread | previous in thread | raw e-mail | index | archive | help
Tomi,
Why don't you try adding iosize 64 to the end of the config line, after
0x10000, like you can see for some of the ata card entries. (Of
course, try without the 0x10000 too.)
This parameter is for cards which fail to include io port info, or
where it is incomplete/incorrect. 64 is a guess from what I have seen
of some other wi cards; you may need to try 32 or other numbers too.
Greg
-----Original Message-----
>Hi,
>
>This card should be a prism2 clone and it works with Linux prism2
>driver. I have tried to get this work with current but no luck yet.
>
>Jul 4 21:48:35 phb pccardd[174]: Card "Nokia"("C110/C111 Wireless LAN
>Card") [(null)] [(null)] matched "Nokia" ("C110/C111 Wireless LAN
Card")
>[(null)] [(null)]
>Jul 4 21:48:40 phb /boot/kernel/kernel: wi0: No I/O space?!
>Jul 4 21:48:40 phb pccardd[174]: driver allocation failed for
>Nokia(C110/C111 Wireless LAN Card): Device not configured
>
>card "Nokia" "C110/C111 Wireless LAN Card"
> config 0x1 "wi" ? 0x10000
> insert /etc/pccard_ether $device start
> remove /etc/pccard_ether $device stop
>
>I already tried auto and without 0x10000
>
>Configuration data for card in slot 1
>Tuple #1, code = 0x1 (Common memory descriptor), length = 3
> 000: 00 00 ff
> Common memory device information:
> Device number 1, type No device, WPS = OFF
> Speed = No speed, Memory block size = 512b, 1 units
>Tuple #2, code = 0x1c (Other conditions for common memory), length = 4
> 000: 02 00 00 ff
> (3V card)
>Tuple #3, code = 0x15 (Version 1 info), length = 37
> 000: 07 00 4e 6f 6b 69 61 00 43 31 31 30 2f 43 31 31
> 010: 31 20 57 69 72 65 6c 65 73 73 20 4c 41 4e 20 43
> 020: 61 72 64 00 ff
> Version = 7.0, Manuf = [Nokia], card vers = [C110/C111
>Wireless LAN Card]
>Tuple #4, code = 0x20 (Manufacturer ID), length = 4
> 000: 24 01 10 11
> PCMCIA ID = 0x124, OEM ID = 0x1110
>Tuple #5, code = 0x21 (Functional ID), length = 2
> 000: 06 00
> Network/LAN adapter
>Tuple #6, code = 0x22 (Functional EXT), length = 2
> 000: 01 07
> Network technology: Wireless
>Tuple #7, code = 0x22 (Functional EXT), length = 5
> 000: 02 c0 d8 a7 00
> Network speed: 11 Mb/sec
>Tuple #8, code = 0x22 (Functional EXT), length = 2
> 000: 03 07
> Network media: 2.4 GHz
>Tuple #9, code = 0x1a (Configuration map), length = 4
> 000: 00 02 f4 01
> Reg len = 1, config register addr = 0xf4, last config = 0x2
> Registers: X-------
>Tuple #10, code = 0x1b (Configuration entry), length = 19
> 000: c1 01 1d 79 55 a6 1e a6 1e b6 14 24 e5 13 5f 64
> 010: 30 ff ff
> Config index = 0x1(default)
> Interface byte = 0x1 (I/O)
> Vcc pwr:
> Nominal operating supply voltage: 5 x 1V
> Continuous supply current: 2 x 100mA, ext = 0x1e
> Max current average over 1 second: 2 x 100mA, ext =
>0x1e
> Max current average over 10 ms: 3 x 100mA, ext = 0x14
> Power down supply current: 2 x 1mA
> Wait scale Speed = 1.2 x 1 us, scaled by 10
> RDY/BSY scale Speed = 5.0 x 10 ms, scaled by 10
> Card decodes 4 address lines, full 8/16 Bit I/O
> IRQ modes: Level
> IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
>Tuple #11, code = 0x1b (Configuration entry), length = 10
> 000: 02 01 79 b5 1e 36 36 b6 46 24
> Config index = 0x2
> Vcc pwr:
> Nominal operating supply voltage: 3 x 1V, ext = 0x1e
> Continuous supply current: 3 x 100mA
> Max current average over 1 second: 3 x 100mA
> Max current average over 10 ms: 3 x 100mA, ext = 0x46
> Power down supply current: 2 x 1mA
>Tuple #12, code = 0x14 (No link), length = 0
>Tuple #13, code = 0xff (Terminator), length = 0
>
>--
>SUN Microsystems Oy PL 112, Lars Sonckin kaari 12, 02601 ESPOO,
Finland
>Tomi Vainio (System Support Engineer) +358 9 52556300 hotline
>email: Tomi.Vainio@Sun.COM +358 9 52556252 fax
>
>To Unsubscribe: send mail to majordomo@FreeBSD.org
>with "unsubscribe freebsd-mobile" in the body of the message
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200107060938140560.0022D9C8>