Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 21 Jan 2001 06:19:28 -0600 (CST)
From:      Steve <vandena@umail.com>
To:        Bryant Martin <bryant@cms-mpc.com>
Cc:        questions@FreeBSD.ORG
Subject:   Re: Checking Disk Space.
Message-ID:  <Pine.BSF.4.21.0101210619020.9767-100000@testbed.com>
In-Reply-To: <3A6AB6B3.69BDF655@cms-mpc.com>

next in thread | previous in thread | raw e-mail | index | archive | help
You can run your preference of the df command.  See man df for
particulars.

 ____  _                 
/ ___|| |_ _____   _____ 
\___ \| __/ _ \ \ / / _ \
 ___) | ||  __/\ V /  __/
|____/ \__\___| \_/ \___|
=========================
   stevevan@vyrus.net
                        

On Sun, 21 Jan 2001, Bryant Martin wrote:

> 
>     I have an older FreeBSD installation, supplied to me by my ISP many
> years ago.  It was on a 1.6 GB EIDE drive and old 66 Mhz PC.
> 
>     Two weeks ago I decided to replace this server with a new PC, with 4
> GB EIDE, CD Drive and fast processor.  Not knowing how to do it, I
> pulled the 1.6 drive and found that Norton's `Ghost' could read it.  I
> copied it to the 4 GB offline.  I put the 4 GB in the new PC and it ran
> fine, except the first night, when it coughed and restared several
> times.  I think BSD must have been making fixes for its new environment?
> 
>     But, I would like to know how much of the 4 GB the single OS is
> using.  I have looked at my books and your site helps and can't seem to
> find a command similar to dos' `dir', which will end its display with
> `bytes available' info.
> 
>     This raises other issues:  If it's using 1.6 GB only, who there can
> help me (for money) by phone change the slice sizes, and maybe advise
> about swap space and other matters, such as is the CD being seen, and is
> the CD useful to me.  This is a small installation of less than 60
> users.
> 
>     Too, I once wrote some PPP stuff to get my dial-up modem working on
> COM1.  That took me two months, and I've forgotten how I did it,
> exactly, but it's working great.  (This gives me ISP free from home
> through my BSD at the office.)
> 
>     Can one of your experts help me look at my install and get the same
> thing working for COM2, so I can hang another modem?
> 
>     Last point.  It's been centuries since I upgraded (although I have
> two newer CD sets at my office where I was thinking about trying).
> Everything runs great on my system, but I need to consider the security
> implications of staying back at my old level.
> 
> Thanks for considering my pleas.
> 
> Bryant Martin
> 
> Commonwealth/Martin
> 1700 Venable Street
> Richmond, VA 23223-6308
> 
> Voice Mail:  800.336.6245 x103  (local 804.780.1700 x103)
> My Desk and Fax: 804.783.2601
> Office Fax:   804.782.9876
> FTP:   ftp://ftp.cms-mpc.com/
>      [ip 209.99.158.2]
>    ftp://ftp.mail-production.com/
>      [ip 206.225.19.3]
> end_of_document
> 
> 
> 
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" in the body of the message
> 



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0101210619020.9767-100000>