Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 28 Aug 2013 06:08:23 +0200
From:      Andreas Nilsson <andrnils@gmail.com>
To:        Craig Rodrigues <rodrigc@freebsd.org>
Cc:        "freebsd-virtualization@freebsd.org" <freebsd-virtualization@freebsd.org>
Subject:   Re: Simulating CD-ROM device with BHyve and ISO disk image?
Message-ID:  <CAPS9%2BSsr8X=TGOefcWQB-bjqFRHibNTbV_orGsaA-EB4DYRiwg@mail.gmail.com>
In-Reply-To: <CAG=rPVdz7sbjQis5hqpFA7ycPEJpEA=sF%2BHMz%2BrzzM4zjQs6Bw@mail.gmail.com>
References:  <CAG=rPVdz7sbjQis5hqpFA7ycPEJpEA=sF%2BHMz%2BrzzM4zjQs6Bw@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
What happens if you specify

cd9660:iso9660/CDROM when first boot attempt has failed?

You could also try cd9660:/dev/vtbd1


Best regards
Andreas


On Wed, Aug 28, 2013 at 1:12 AM, Craig Rodrigues <rodrigc@freebsd.org>wrote:

> Hi,
>
> I have an ISO image that I am trying to boot in BHyve.
>
> I tried this:
>
> truncate -s 2G /tmp/disk.img
> sh /usr/share/examples/bhyve/vmrun.sh -I test.iso -d /tmp/disk.img freenas1
>
> The initial kernel boots, but then fails to mount the root device:
>
>
> ============================================================================
> mountroot> ?
>
> List of GEOM managed disk devices:
>   iso9660/CDROM vtbd1 vtbd0
>
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 9.1-STABLE #0 r+42f8bbd: Sun Aug 18 00:03:25 PDT 2013
>     root@build.ixsystems.com:
> /tank/home/rodrigc/freenas/freenas/os-base/amd64/tank/home/rodrigc/freenas/freenas/FreeBSD/src/sys/FREENAS.amd64
> amd64
> gcc version 4.2.1 20070831 patched [FreeBSD]
> CPU: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (2494.19-MHz K8-class CPU)
>   Origin = "GenuineIntel"  Id = 0x206a7  Family = 0x6  Model = 0x2a
> Stepping = 7
>
>
> Features=0x8f8bab7f<FPU,VME,DE,PSE,TSC,MSR,PAE,CX8,APIC,SEP,PGE,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,SS,PBE>
>
>
> Features2=0x83ba6257<SSE3,PCLMULQDQ,DTES64,DS_CPL,SMX,SSSE3,CX16,xTPR,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,HV>
>   AMD Features=0x20100800<SYSCALL,NX,LM>
>   AMD Features2=0x1<LAHF>
>   TSC: P-state invariant
> real memory  = 536870912 (512 MB)
> avail memory = 492359680 (469 MB)
> Event timer "LAPIC" quality 400
> ACPI APIC Table: <BHYVE  BVMADT  >
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> FreeBSD/SMP: 2 package(s) x 1 core(s)
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
> WARNING: VIMAGE (virtualized network stack) is a highly experimental
> feature.
> ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating
> length 268 to 244 (20110527/tbfadt-320)
> ioapic0: Changing APIC ID to 2
> ioapic0 <Version 1.1> irqs 0-16 on motherboard
> kbd0 at kbdmux0
> aesni0: <AES-CBC,AES-XTS> on motherboard
> cryptosoft0: <software crypto> on motherboard
> acpi0: <BHYVE BVXSDT> on motherboard
> atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
> Event timer "RTC" frequency 32768 Hz quality 0
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib0: no PRT entry for 0.31.INTA
> virtio_pci0: <VirtIO PCI Network adapter> port 0x2000-0x201f mem
> 0xc0000000-0xc0001fff at device 1.0 on pci0
> vtnet0: <VirtIO Networking Adapter> on virtio_pci0
> virtio_pci0: host features: 0x1018020
> <NotifyOnEmpty,Status,MrgRxBuf,MacAddress>
> virtio_pci0: negotiated features: 0x1018020
> <NotifyOnEmpty,Status,MrgRxBuf,MacAddress>
> vtnet0: Ethernet address: 00:a0:98:30:99:23
> virtio_pci1: <VirtIO PCI Block adapter> port 0x2040-0x207f mem
> 0xc0002000-0xc0003fff at device 2.0 on pci0
> vtblk0: <VirtIO Block Adapter> on virtio_pci1
> virtio_pci1: host features: 0x10000004 <RingIndirect,MaxNumSegs>
> virtio_pci1: negotiated features: 0x10000004 <RingIndirect,MaxNumSegs>
> vtblk0: 2048MB (4194304 512 byte sectors)
> virtio_pci2: <VirtIO PCI Block adapter> port 0x2080-0x20bf mem
> 0xc0004000-0xc0005fff at device 3.0 on pci0
> vtblk1: <VirtIO Block Adapter> on virtio_pci2
> virtio_pci2: host features: 0x10000004 <RingIndirect,MaxNumSegs>
> virtio_pci2: negotiated features: 0x10000004 <RingIndirect,MaxNumSegs>
> vtblk1: 254MB (521624 512 byte sectors)
> uart2: <16550 or compatible> port 0x3f8-0x3ff irq 4 at device 31.0 on pci0
> uart2: console (9600,n,8,1)
> Timecounters tick every 1.000 msec
> ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept,
> logging disabled
> DUMMYNET 0xfffffe0002106940 with IPv6 initialized (100409)
> load_dn_sched dn_sched WF2Q+ loaded
> load_dn_sched dn_sched FIFO loaded
> load_dn_sched dn_sched PRIO loaded
> load_dn_sched dn_sched QFQ loaded
> load_dn_sched dn_sched RR loaded
> SMP: AP CPU #1 Launched!
> Timecounter "TSC-low" frequency 1247092718 Hz quality 1000
> Trying to mount root from cd9660:/dev/cd0 [ro]...
> mountroot: waiting for device /dev/cd0 ...
> Mounting from cd9660:/dev/cd0 failed with error 19.
> Trying to mount root from cd9660:/dev/acd0 [ro]...
> mountroot: waiting for device /dev/acd0 ...
> Mounting from cd9660:/dev/acd0 failed with error 19.
>
> Loader variables:
>
> Manual root filesystem specification:
>   <fstype>:<device> [options]
>       Mount <device> using filesystem <fstype>
>       and with the specified (optional) option list.
>
>     eg. ufs:/dev/da0s1a
>         zfs:tank
>         cd9660:/dev/acd0 ro
>           (which is equivalent to: mount -t cd9660 -o ro /dev/acd0 /)
>
>   ?               List valid disk boot devices
>   .               Yield 1 second (for background tasks)
>   <empty line>    Abort manual input
>
> mountroot> ?
>
> List of GEOM managed disk devices:
>   iso9660/CDROM vtbd1 vtbd0
>
>
> ============================================================================
>
> Currently the logic for how the root mount device is chosen
> is hardcoded in the vfs_mountroot_conf0 function:
>
> http://bxr.su/FreeBSD/sys/kern/vfs_mountroot.c#823
>
>
> This logic basically says, try in this order:
>
> cd9660:/dev/cd0
> cd9660:/dev/acd0
> device specified in vfs.root.mountfrom
>
> It looks like with BHyve, if I invoke the vmrun.sh script as I have
> done, the ISO file is not on cd0 or acd0, but is on vtbd1.
>
> Is there a way I can mount the ISO file on a simulated cd0 device?
> This would make the logic in my installer still work.
> This ISO image successfully boots on real hardware,
> and in qemu with the "-cdrom" flag.
>
> Thanks.
>
> --
> Craig
> _______________________________________________
> freebsd-virtualization@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-virtualization
> To unsubscribe, send any mail to "
> freebsd-virtualization-unsubscribe@freebsd.org"
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAPS9%2BSsr8X=TGOefcWQB-bjqFRHibNTbV_orGsaA-EB4DYRiwg>