Date: Thu, 08 Mar 2001 23:30:36 -0800 From: mike.mcclain@shakeyjakes.com To: freebsd-hackers@freebsd.org Subject: Help!!! 2nd HD gone Message-ID: <1885270759@shakeyjakes.com>
index | next in thread | raw e-mail
Howdy,
I hadn't booted FreeBSD 3.4 for many months but had mounted
several partitions on /dev/wd2s* from /etc/fstab.
Last week I couldn't get a clean boot 'til I took all references
to /dev/wd2s* out of /etc/fstab.
fbsd:~> uname -a
FreeBSD playground 3.4-RELEASE FreeBSD 3.4-RELEASE #1: Sun Mar 26
16:56:35 PST
2000 root@:/usr/src/sys/compile/McKERNEL i386
From dmesg:
CPU: Pentium/P55C (167.05-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping = 3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 33554432 (32768K bytes)
chip0: <Intel 82439TX System Controller (MTXC)> rev 0x01 on pci0.0.0
chip1: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
chip2: <Intel 82371AB Power management controller> rev 0x01 on pci0.7.3
Having done that I now see:
fbsd:~> mount -t ext2fs /dev/wd2s1 /rh6
ext2fs: /dev/wd2s1: Device not configured
fbsd:~> fdisk /dev/wd2.fdisk: cannot open disk
/dev/wd2: Device not configured
fbsd:~> disklabel /dev/wd2
disklabel: /dev/wd2: Device not configured
fbsd:~> ls -l /dev/wd2s*
brw-r----- 1 root operator 0, 0x00020012 Mar 20 2000 /dev/wd2s1
... /dev/wd2s2 through /dev/wd2s8 nearly identical
brw-r----- 1 root operator 0, 0x000a0012 Apr 20 2000 /dev/wd2s9
from /var/log/dmesg.today: this is the way it was.
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <WDC AC24300L>
wd0:4112MB (8421840 sectors), 8912 cyls, 15 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (wd2): <WDC AC26400R>
wd2: 6149MB (12594960 sectors), 13328 cyls, 15 heads, 63 S/T, 512
B/S
from /var/log/messages:
May 23 18:15:19 /kernel: wdc1 at 0x170-0x177 irq 15 on isa
May 23 18:15:19 /kernel: wdc1: unit 0 (wd2): <WDC AC26400R>
Feb 11 16:27:36 /kernel: wdc1 not found at 0x170
This makes me think the kernal is not seeing the controller at boot.
wd2 aka D: aka /dev/hdc is visible from dos and I'm writing this from
Slackware 7.0 mounted on /dev/hdc8.
This from Slackware's /var/log/messages:
Feb 15 09:20:15 playground kernel:
hda: WDC AC24300L, 4112MB w/256kB Cache, CHS=524/255/63, UDMA
Feb 15 09:20:15 playground kernel:
hdc: WDC AC26400R, 6149MB w/512kB Cache, CHS=13328/15/63, (U)DMA
I've tried various configurations in BIOS with no luck.
I'm stumped. All suggestions welcome.
TIA,
MiKe
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1885270759>