Date: Wed, 11 Mar 1998 11:47:42 +0100 From: Eric Feillant <Eric.Feillant@EUnet-Bretagne.fr> To: hm@hcs.de Cc: freebsd-isdn@FreeBSD.ORG Subject: Re: i4b patch Message-ID: <35066BCE.9EBC10CC@EUnet-Bretagne.fr> References: <m0yCRL2-0000cTC@hcswork.hcs.de>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Helmut and ISDN/FreeBSD users!
I'm not far for my system to work now... but i still have problem....
Here is my dmesg result:
Copyright (c) 1992-1997 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 2.2.2-RELEASE #0: Tue Mar 10 18:52:44 CET 1998
root@asterix.EUnet-Bretagne.fr:/usr/src/sys/compile/ISDN
CPU: i486DX (486-class CPU)
real memory = 16777216 (16384K bytes)
avail memory = 14708736 (14364K bytes)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x280-0x29f irq 5 on isa
ed0: address 08:00:17:0a:15:7d, type NE2000 (16 bit)
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 765
fd0: 1.44MB 3.5in
aha0 at 0x330-0x333 irq 11 drq 5 on isa
(aha0:0:0): "MICROP 1588-15MB1036511 AS0C" type 0 fixed SCSI 1
sd0(aha0:0:0): Direct-Access 636MB (1304052 512 byte sectors)
(aha0:5:0): "ARCHIVE Python 28388-XXX 5.45" type 1 removable SCSI 2
st0(aha0:5:0): Sequential-Access density code 0x13, 512-byte blocks, write-enabl
ed
(aha0:6:0): "SKJY C@)RKI C@Q)8003A " type 1 removable SCSI 2
st1(aha0:6:0): Sequential-Access density code 0x0, drive empty
isic0 at 0x268 irq 12 flags 0x12 on isa
isic0: USRobotics Sportster ISDN TA intern (IOM-2)
isic0: ISAC 2085 Version A1/A2 or 2086/2186 Version 1.1 (Addr=0xc268)
isic0: HSCX 82525 or 21525 Version 2.1 (AddrA=0x268, AddrB=0x4268)
npx0 flags 0x1 on motherboard
npx0: INT 16 interface
apm0: disabled, not probed.
changing root device to sd0a
i4b: ISDN call control device attached
i4bisppp: 4 ISDN SyncPPP device(s) attached
i4bctl: ISDN system control port attached
i4bipr: 4 IP over raw HDLC ISDN device(s) attached
i4btel: 2 ISDN telephony interface device(s) attached
i4brbch: 4 raw B channel access device(s) attached
I use a US ROBOTICS ISDN TA CARD
Here's my /etc/rc.isdn file ==>
#!/bin/sh
# output device for fullscreen mode
out_dev=/dev/ttyv3
# terminal type for fullscreen mode
out_typ=cons25
# Adresse de la machine ^` joindre
ROUTEUR="193.107.122.7"
# Mise en place de l'interface isppp0 pour ALTICA
# Attention, il y a un mot de passe ici.
# Ce fichier doit donc avoir les droits de lecture ad^iquats
echo "configuring I4BISDN/PPP-interface isppp0 to ALTICA"
ifconfig isppp0 link1 0.0.0.0 $ROUTEUR netmask 255.255.255.192 debug
ifconfig isppp0 down
spppcontrol isppp0 authproto=chap myauthname=XXX myauthsecret=XXXP ca
llin hisauthproto=none
echo 'adding default route to ALTICA'
route add default $ROUTEUR
if [ -f /var/log/isdnd.log ]
echo "rotating /var/log/isdnd.log file ..."
cd /var/log
if [ -f isdnd.log4 ] ; then mv -f isdnd.log4 isdnd.log5 ; fi
if [ -f isdnd.log3 ] ; then mv -f isdnd.log3 isdnd.log4 ; fi
if [ -f isdnd.log2 ] ; then mv -f isdnd.log2 isdnd.log3 ; fi
if [ -f isdnd.log1 ] ; then mv -f isdnd.log1 isdnd.log2 ; fi
if [ -f isdnd.log0 ] ; then mv -f isdnd.log0 isdnd.log1 ; fi
cp -pf isdnd.log isdnd.log0
cat /dev/null > isdnd.log
fi
# start the isdn daemon
if [ -x /usr/local/bin/isdnd ]
then
if [ -f /var/run/isdnd.pid ]
then
echo 'Another isdnd is running as PID `cat /var/run/isdnd.pid`'
else
echo 'starting the isdn4bsd ISDN management daemon ...'
/usr/local/bin/isdnd -d0xf9 -f -r $out_dev -t $out_typ
if [ -x /usr/local/bin/isdntrace ]
then
echo 'starting the isdn4bsd ISDN tracing facility ...'
nohup /usr/local/bin/isdntrace -f/var/tmp/isdn.trace >/dev/null 2>&1 &
fi
fi
Here's my /etc/isdn/isdnd.rc file
system
ratesfile = /etc/isdn/isdnd.rates # name & location of rates file
useacctfile = no # generate accouting info to file
acctall = off # generate info for everything
acctfile = /var/log/isdnd.acct # name & location of accounting file
regexpr = "connected.*KTS" # look for matches in log messages
regprog = connectKTS # execute program whan match is found
rtprio = 25 # modify isdnd's priority
#======================================================================
# example for sPPP
#======================================================================
entry
name = ALTICA
usrdevicename = isppp
usrdeviceunit = 0
isdncontroller = 0
isdnchannel = -1
local-phone-incoming = 36
remote-phone-incoming = *
remote-phone-dialout = 02989XXXX
remdial-handling = first
dialin-reaction = accept
dialout-type = normal
b1protocol = hdlc
idletime-incoming = 240
idletime-outgoing = 20 # delai d'inactivite' avant raccrochage
ratetype = 0
unitlength = 180
unitlengthsrc = rate
dialretries = 1 # nombre de reessais avant abandon
dialrandincr = on
recoverytime = 25
usedown = on # mettre l'interface down si ca ne marche pas
downtries = 2 # au bout de combien d'essais ?
downtime = 30 # combien de temps apres le dernier essai ?
# EOF #########################-,##############################################
When i run /etc/rc.isdn , all seems to be great except that the isppp0 interface
stay down ......
here's here my ifconfig -a results =>
ed0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 193.107.210.133 netmask 0xffffff00 broadcast 193.107.210.255
ether 08:00:17:0a:15:7d
isppp0: flags=2814<DEBUG,POINTOPOINT,SIMPLEX,LINK1> mtu 1500
inet 0.0.0.0 --> 193.107.122.7 netmask 0xffffffc0
isppp1: flags=810<POINTOPOINT,SIMPLEX> mtu 1500
isppp2: flags=810<POINTOPOINT,SIMPLEX> mtu 1500
isppp3: flags=810<POINTOPOINT,SIMPLEX> mtu 1500
ipr0: flags=10<POINTOPOINT> mtu 1500
ipr1: flags=10<POINTOPOINT> mtu 1500
ipr2: flags=10<POINTOPOINT> mtu 1500
ipr3: flags=10<POINTOPOINT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
Here's the error message i got on my console:
i4b-L1-isic_isac_irq: RPF, input buffer OVERFLOW!
i4b-L1-isic_isac_irq: RME, error or input buffer overflow
i4b-L1-isic_isac_irq: RPF, input buffer OVERFLOW!
i4b-L1-F_ill: FSM function F_ill executing
i4b-L1-isic_next_state: FSM Illegal State ERROR, oldstate = F6 Synchronizd,
newstate = F3a Power Down, event = EV_DR Deactivate Req!
thanx for trying to help me......
--
========= ____ ===== Eric Feillant
======== / / / ___ ___ /_ ====== EUnet BRETAGNE
======= /---- / / / / /___/ / ======= 140, bd de Creach Gwen
====== /____ /___/ / / /___ /_ ======== 29000 QUIMPER, France
===== Bretagne ========= Tel:(+33) 298101620
Fax:(+33) 298101629
Eric.Feillant@EUnet.fr
http://www.EUnet.fr
Partenaire CISCO, CHECKPOINT (FIREWALL), BAY NETWORKS, NEWBRIDGE, SUN, CITRIX
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?35066BCE.9EBC10CC>