Date: Sun, 02 May 1999 14:34:36 +0200 (CEST) From: erik@habatech.no To: Nick Hibma <hibma@skylink.it> Cc: freebsd-current@FreeBSD.ORG, Rick Whitesel <rwhitesel@nbase-xyplex.com>, Jim Bloom <bloom@acm.org> Subject: Re: Problems with ahc (2940U2W) and USB Message-ID: <XFMail.990502143436.erik@habatech.no> In-Reply-To: <Pine.BSF.3.96.990501211708.7427A-100000@heidi.plazza.it>
next in thread | previous in thread | raw e-mail | index | archive | help
This message is in MIME format
--_=XFMail.1.3.p0.FreeBSD:990502143436:300=_
Content-Type: text/plain; charset=us-ascii
On 01-May-99 Nick Hibma wrote:
>
> Did I miss an update on this? Could you guys drop me the output of dmesg
> (after a boot -v if possible)?
>
When doing some more research into this problem, I found that the BIOS did
not assign any IRQ to the USB controller, even though it was instructed
to do so.
I upgraded to the newest BIOS version, and suddenly the problematic kernel
worked.
My problem was solved by this, how about the other people reporting similar
problems?
Attached is the dmesg output of the kernel. (boot -v)
--
--------------------------------+---------------------------------------+
Erik H. Bakke, Habatech AS | To be or not to be... |
E-Mail: erik@habatech.no Date: 02-May-99 Time: 14:30:48 | Is simply a
question of binary logic. |
This message was sent by XFMail | |
--------------------------------+---------------------------------------+
--_=XFMail.1.3.p0.FreeBSD:990502143436:300=_
Content-Disposition: attachment; filename="dmesg.works.too"
Content-Transfer-Encoding: 7bit
Content-Description: dmesg.works.too
Content-Type: text/plain;
charset=iso-8859-1; name=dmesg.works.too; SizeOnDisk=13219
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #1: Sun May 2 14:10:45 CEST 1999
root@freebsd.habatech.no:/usr/src/sys/compile/HABA.USB
Calibrating clock(s) ... TSC clock: 300654953 Hz, i8254 clock: 1193075 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium II (300.68-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x634 Stepping=4
Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX
>
real memory = 67108864 (65536K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x002c5000 - 0x03fd7fff, 64040960 bytes (15635 pages)
avail memory = 62316544 (60856K bytes)
Found BIOS32 Service Directory header at 0xc00fad80
Entry = 0xfb200 (0xc00fb200) Rev = 0 Len = 1
PCI BIOS entry at 0xb230
DMI header at 0xc00f5c00
Version 2.0
Table at 0xf0800, 29 entries, 747 bytes
Other BIOS signatures found:
ACPI: 00000000
$PnP: 000fbd90
Preloaded elf kernel "kernel.old" at 0xc02b0000.
Pentium Pro MTRR support enabled, default memory type is uncacheable
Initializing PnP override table
Probing for PnP devices:
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
No Plug-n-Play devices were found
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <PCI host bus adapter> on motherboard
found-> vendor=0x8086, dev=0x7190, revid=0x02
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[0]: type 3, range 32, base e0000000, size 26
found-> vendor=0x8086, dev=0x7191, revid=0x02
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x8086, dev=0x7110, revid=0x02
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7111, revid=0x01
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[0]: type 4, range 32, base 0000f000, size 4
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=11
map[0]: type 4, range 32, base 00006400, size 5
found-> vendor=0x8086, dev=0x7113, revid=0x02
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x1274, dev=0x5000, revid=0x01
class=04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[0]: type 4, range 32, base 00006800, size 6
found-> vendor=0x9005, dev=0x0010, revid=0x00
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[0]: type 4, range 32, base 00006c00, size 8
map[1]: type 1, range 64, base e5100000, size 12
map[2]: type 0, range 0, base 00000000, size 0
found-> vendor=0x8086, dev=0x1229, revid=0x05
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[0]: type 3, range 32, base e5101000, size 12
map[1]: type 4, range 32, base 00007000, size 5
map[2]: type 1, range 32, base e5000000, size 20
found-> vendor=0x1002, dev=0x4750, revid=0x5c
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[0]: type 3, range 32, base e4000000, size 24
map[1]: type 4, range 32, base 00007400, size 8
map[2]: type 1, range 32, base e5102000, size 12
pci0: <PCI bus> on pcib0
chip0: <Intel 82443BX host to PCI bridge> at device 0.0 on pci0
chip1: <Intel 82443BX host to AGP bridge> at device 1.0 on pci0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
ata-pci0: <Intel PIIX4 IDE controller> at device 7.1 on pci0
ata-pci0: Busmastering DMA supported
ata0 at 0x01f0 irq 14 on ata-pci0
ata1 at 0x0170 irq 15 on ata-pci0
uhci0: <Intel 82371AB/EB (PIIX4) USB Host Controller> at device 7.2 on pci0
uhci0: interrupting at irq 11
uhci0: USB version 1.0, chip rev. 1
usb0: <Intel 82371AB/EB (PIIX4) USB Host Controller> on uhci0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip2: <Intel 82371AB Power management controller> at device 7.3 on pci0
es0: <AudioPCI ES1370> at device 9.0 on pci0
pcm0: using I/O space register mapping at 0x6800
es0: interrupting at irq 10
ahc0: <Adaptec 2940 Ultra2 SCSI adapter> at device 10.0 on pci0
ahc0: Reading SEEPROM...done.
ahc0: BIOS eeprom is present
ahc0: Secondary High byte termination Enabled
ahc0: Secondary Low byte termination Enabled
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc0: Downloading Sequencer Program... 390 instructions downloaded
ahc0: interrupting at irq 5
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> at device 11.0 on pci0
fxp0: interrupting at irq 9
fxp0: Ethernet address 00:08:c7:b2:ec:ef
bpf: fxp0 attached
isa0: <ISA bus> on motherboard
fdc0: interrupting at irq 6
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> at fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60 on isa0
atkbd0: <AT Keyboard> on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: interrupting at irq 1
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 36 03 c8
psm: status 36 03 c8
psm: status 36 03 c8
psm: status 10 00 64
psm: data 08 00 00
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> on atkbdc0
psm0: model IntelliMouse, device ID 3, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:c8, syncbits:08
psm0: interrupting at irq 12
vga0: <Generic ISA VGA> on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3b0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0x0 size:0k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: fb0 kbd0
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio0: interrupting at irq 4
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 flags 0x10 on isa0
sio1: type 16550A
sio1: interrupting at irq 3
ppc: parallel port found at 0x3bc
ppc0: ECP SPP SPP
ppc0 at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppb0: IEEE1284 device found /NIBBLE/PS2/ECP/NIBBLE_ID/PS2_ID/ECP_ID/Extensibilit
y Link
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 870C> PCL,MLC,PML
plip: irq 7
plip0: <PLIP network interface> on ppbus 0
bpf: lp0 attached
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
ppc0: interrupting at irq 7
mss_probe: no address supplied, try default 0x530
mss_detect error, busy still set (0xff)
sb_probe: no address supplied, try defaults (0x220,0x240)
pca0 at port 0x40 on isa0
pca0: PC speaker audio driver
BIOS Geometries:
0:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
1:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
2:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
3:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
4:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
5:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
6:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
7:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: ds0 attached
ds0 XXX: driver didn't set ifq_maxlen
ata0: master: settting up WDMA2 mode on PIIX3/4 chip OK
ad0: <QUANTUM FIREBALL1280A/A63.0E00> ATA-? disk at ata0 as master
ad0: 1222MB (2503872 sectors), 2484 cyls, 16 heads, 63 S/T, 512 B/S
ad0: piomode=4, dmamode=2, udmamode=-1
ad0: 8 secs/int, 0 depth queue, DMA mode
ata1: master: settting up UDMA2 mode on PIIX4 chip OK
ad1: <WDC AC26400B/32.02S32> ATA-4 disk at ata1 as master
ad1: 6149MB (12594960 sectors), 13328 cyls, 15 heads, 63 S/T, 512 B/S
ad1: piomode=4, dmamode=2, udmamode=2
ad1: 16 secs/int, 0 depth queue, DMA mode
ata1: slave: settting up UDMA2 mode on PIIX4 chip OK
ad2: <ST36451A/840488> ATA-3 disk at ata1 as slave
ad2: 6149MB (12594960 sectors), 13328 cyls, 15 heads, 63 S/T, 512 B/S
ad2: piomode=4, dmamode=2, udmamode=2
ad2: 16 secs/int, 0 depth queue, DMA mode
Waiting 5 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
ahc0: Selection Timeout on A:2. 1 SCBs aborted
ahc0: Selection Timeout on A:5. 1 SCBs aborted
ahc0: Selection Timeout on A:6. 1 SCBs aborted
ahc0: Selection Timeout on A:8. 1 SCBs aborted
ahc0: Selection Timeout on A:9. 1 SCBs aborted
ahc0: Selection Timeout on A:10. 1 SCBs aborted
ahc0: Selection Timeout on A:11. 1 SCBs aborted
ahc0: Selection Timeout on A:12. 1 SCBs aborted
ahc0: Selection Timeout on A:13. 1 SCBs aborted
ahc0: Selection Timeout on A:14. 1 SCBs aborted
ahc0: Selection Timeout on A:15. 1 SCBs aborted
(probe3:ahc0:0:3:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe3:ahc0:0:3:0): ILLEGAL REQUEST asc:24,0
(probe3:ahc0:0:3:0): Invalid field in CDB
ahc0: target 3 synchronous at 16.0MHz, offset = 0x10
(probe4:ahc0:0:4:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe4:ahc0:0:4:0): ILLEGAL REQUEST csi:0,0,74,c3 asc:24,0
(probe4:ahc0:0:4:0): Invalid field in CDB
ahc0: target 4 synchronous at 10.0MHz, offset = 0xf
ahc0: target 1 using 16bit transfers
ahc0: target 1 synchronous at 20.0MHz, offset = 0xf
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 20.0MHz, offset = 0xf
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <SEAGATE ST34573LW 5766> Fixed Direct Access SCSI-2 device
pass0: Serial Number LN362345000019010TJ0
pass0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabl
ed
pass1 at ahc0 bus 0 target 1 lun 0
pass1: <SEAGATE ST34502LW 0004> Fixed Direct Access SCSI-2 device
pass1: Serial Number NL00765700001845HWQM
pass1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabl
ed
pass2 at ahc0 bus 0 target 3 lun 0
pass2: <PIONEER CD-ROM DR-U06S 1.04> Removable CD-ROM SCSI-2 device
pass2: 19.230MB/s transfers (19.230MHz, offset 16)
pass3 at ahc0 bus 0 target 4 lun 0
pass3: <PHILIPS CDD3600 CD-R/RW 2.00> Removable CD-ROM SCSI-2 device
pass3: 10.000MB/s transfers (10.000MHz, offset 15)
Considering FFS root f/s.
changing root device to wd0s1a
cd0 at ahc0 bus 0 target 3 lun 0
cd0: <PIONEER CD-ROM DR-U06S 1.04> Removable CD-ROM SCSI-2 device
cd0: 19.230MB/s transfers (19.230MHz, offset 16)
cd0: cd present [284433 x 2048 byte records]
da1 at ahc0 bus 0 target 1 lun 0
da1: <SEAGATE ST34502LW 0004> Fixed Direct Access SCSI-2 device
da1: Serial Number NL00765700001845HWQM
da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da1: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST34573LW 5766> Fixed Direct Access SCSI-2 device
da0: Serial Number LN362345000019010TJ0
da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C)
ad0s1: type 0xa5, start 0, end = 2503871, size 2503872 : OK
start_init: trying /sbin/init
da0s1: type 0xa5, start 32, end = 8888319, size 8888288 : OK
da1s1: type 0xa5, start 32, end = 8888319, size 8888288 : OK
ad1: invalid primary partition table: no magic
cd1 at ahc0 bus 0 target 4 lun 0
cd1: <PHILIPS CDD3600 CD-R/RW 2.00> Removable CD-ROM SCSI-2 device
cd1: 10.000MB/s transfers (10.000MHz, offset 15)
cd1: cd present [28879 x 2048 byte records]
da0s1: type 0xa5, start 32, end = 8888319, size 8888288 : OK
da1s1: type 0xa5, start 32, end = 8888319, size 8888288 : OK
ad1s1: type 0xa5, start 63, end = 12594959, size 12594897 : OK
Linux-ELF exec handler installed
--_=XFMail.1.3.p0.FreeBSD:990502143436:300=_--
End of MIME message
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?XFMail.990502143436.erik>