Date: Thu, 17 Aug 2006 10:50:50 +0400 From: "Alexey Karagodov" <karagodov@gmail.com> To: "Android Andrew [:]" <android@oberon.pfi.lt> Cc: Christian Walther <cptsalek@gmail.com>, freebsd-stable@freebsd.org, Ian Smith <smithi@nimnet.asn.au> Subject: Re: FreeBSD 6.1-STABLE: Unexplained power off Message-ID: <c7aff4ef0608162350r538ddb45nc7349c9e062bbcd3@mail.gmail.com> In-Reply-To: <44E392C3.2000605@oberon.pfi.lt> References: <Pine.BSF.3.96.1060817031254.21749A-100000@gaia.nimnet.asn.au> <44E392C3.2000605@oberon.pfi.lt>
next in thread | previous in thread | raw e-mail | index | archive | help
you have ichwd ... what settings in bios and on motherboard related to watchdog? 2006/8/17, Android Andrew [:] <android@oberon.pfi.lt>: > > Thank you for answers! > > Yesterday the last iteration of high load testing finished with just > another power off. > There are two ways of problem-solving have been outlined in this thread. > One way - hardware problem, e.g. PSU. > Another way - software, e.g. APM/ACPI problem. > > I could not find any PSU for replacement at this moment. So, I've been > playing with BIOS and kernel options. I disabled "dynamic overclocking", > hyperthreading options in BIOS. There's no "Disable APM" (or something > like this) or "Disable ACPI" in my BIOS. I can only disable some ACPI > functions or extensions (like "Enable ACPI 2 extensions"). I've > recompiled kernel without apm/acpi options and without SMP support. > > I was typing "After recompilation system is still working without > crashing" when system just turned off.... :) > > > my loader.conf: > loader_logo="beastie" > if_myk_load="YES" > nvidia_load="YES" > > sysctl.conf: > net.inet.tcp.msl=7500 > net.inet.udp.blackhole=1 > net.inet.ip.random_id=1 > kern.ipc.somaxconn=4096 > net.inet.icmp.icmplim=100 > > last dmesg: > Copyright (c) 1992-2006 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 6.1-STABLE #8: Wed Aug 16 21:11:42 EEST 2006 > root@callisto:/usr/obj/usr/src/sys/callisto > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (3010.67-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf43 Stepping = 3 > > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0x649d<SSE3,RSVD2,MON,DS_CPL,EST,CNTX-ID,CX16,<b14>> > AMD Features=0x20100000<NX,LM> > real memory = 2147090432 (2047 MB) > avail memory = 2092273664 (1995 MB) > kbd1 at kbdmux0 > ichwd module loaded > acpi0: <A M I OEMRSDT> on motherboard > acpi_bus_number: can't get _ADR > acpi_bus_number: can't get _ADR > acpi_bus_number: can't get _ADR > acpi_bus_number: can't get _ADR > acpi_bus_number: can't get _ADR > acpi_bus_number: can't get _ADR > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > cpu0: <ACPI CPU> on acpi0 > ACPI-1304: *** Error: Method execution failed [\\_PR_.CPU1._PDC] > (Node 0xc5c81c60), AE_BAD_HEADER > acpi_throttle0: <ACPI CPU Throttling> on cpu0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> irq 11 at device 1.0 on pci0 > pci4: <ACPI PCI bus> on pcib1 > nvidia0: <GeForce 6600> mem > 0xd4000000-0xd7ffffff,0xd8000000-0xdfffffff,0xd3000000-0xd3ffffff irq 11 > at device 0.0 on pci4 > nvidia0: [GIANT-LOCKED] > pci0: <multimedia> at device 27.0 (no driver attached) > pcib2: <ACPI PCI-PCI bridge> irq 11 at device 28.0 on pci0 > pci3: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> irq 10 at device 28.3 on pci0 > pci2: <ACPI PCI bus> on pcib3 > myk0: <Marvell 88E8053 Gigabit Ethernet Controller, Ver. 8.12.2.3> port > 0xc800-0xc8ff mem 0xd2efc000-0xd2efffff irq 10 at device 0.0 on pci2 > myk0: Ethernet address: 00:13:d4:d0:31:e5 > uhci0: <UHCI (generic) USB controller> port 0x8000-0x801f irq 5 at > device 29.0 on pci0 > uhci0: [GIANT-LOCKED] > usb0: <UHCI (generic) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <UHCI (generic) USB controller> port 0x8400-0x841f irq 11 at > device 29.1 on pci0 > uhci1: [GIANT-LOCKED] > usb1: <UHCI (generic) USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <UHCI (generic) USB controller> port 0x8800-0x881f irq 3 at > device 29.2 on pci0 > uhci2: [GIANT-LOCKED] > usb2: <UHCI (generic) USB controller> on uhci2 > usb2: USB revision 1.0 > uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > uhci3: <UHCI (generic) USB controller> port 0x9000-0x901f irq 10 at > device 29.3 on pci0 > uhci3: [GIANT-LOCKED] > usb3: <UHCI (generic) USB controller> on uhci3 > usb3: USB revision 1.0 > uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub3: 2 ports with 2 removable, self powered > ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem > 0xd2dff800-0xd2dffbff irq 5 at device 29.7 on pci0 > ehci0: [GIANT-LOCKED] > usb4: EHCI version 1.0 > usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 > usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 > usb4: USB revision 2.0 > uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub4: 8 ports with 8 removable, self powered > uhub4: device problem (IOERROR), disabling port 7 > pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci1: <ACPI PCI bus> on pcib4 > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH7 UDMA100 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 > ata0: <ATA channel 0> on atapci0 > ata1: <ATA channel 1> on atapci0 > atapci1: <Intel ICH7 SATA300 controller> port > 0xa800-0xa807,0xa400-0xa403,0xa000-0xa007,0x9800-0x9803,0x9400-0x940f > mem 0xd2dffc00-0xd2dfffff irq 11 at device 31.2 on pci0 > ata2: <ATA channel 0> on atapci1 > ata3: <ATA channel 1> on atapci1 > ata4: <ATA channel 2> on atapci1 > ata5: <ATA channel 3> on atapci1 > ichsmb0: <SMBus controller> port 0x400-0x41f irq 11 at device 31.3 on pci0 > ichsmb0: [GIANT-LOCKED] > smbus0: <System Management Bus> on ichsmb0 > smb0: <SMBus generic I/O> on smbus0 > acpi_button0: <Power Button> on acpi0 > speaker0: <PC speaker> port 0x61 on acpi0 > fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 > on acpi0 > fdc0: [FAST] > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq > 3 on acpi0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/9 bytes threshold > ppbus0: <Parallel port bus> on ppc0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on > acpi0 > sio0: type 16550A > ichwd0: <Intel ICH5 watchdog timer> on isa0 > orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > fb0 at vga0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > ukbd0: Key Tronic Keytronic USB Keyboard, rev 1.10/1.02, addr 2, iclass > 3/1 > kbd2 at ukbd0 > ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/20.00, addr 3, iclass 3/1 > ums0: 4 buttons and Z dir. > Timecounter "TSC" frequency 3010671825 Hz quality 800 > Timecounters tick every 1.000 msec > ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding > enabled, default to deny, logging limited to 100 packets/entry by default > acd0: DVDR <PIONEER DVD-RW DVR-111D/1.19> at ata0-master UDMA66 > ad4: 114473MB <Seagate ST3120813AS 2AAA> at ata2-master SATA300 > ad6: 114473MB <Seagate ST3120813AS 2AAA> at ata3-master SATA300 > ar0: 228942MB <Intel MatrixRAID RAID0 (stripe 128 KB)> status: READY > ar0: disk0 READY using ad4 at ata2-master > ar0: disk1 READY using ad6 at ata3-master > cd0 at ata0 bus 0 target 0 lun 0 > cd0: <PIONEER DVD-RW DVR-111D 1.19> Removable CD-ROM SCSI-0 device > cd0: 66.000MB/s transfers > cd0: Attempt to query device size failed: NOT READY, Medium not present > Trying to mount root from ufs:/dev/ar0s1a > myk0: link up > oss: Out of mixer extensions for device 0 > > > Ian Smith wrote: > > On Tue, 15 Aug 2006, Christian Walther wrote: > > > > > This is just a wild, uneducated guess, because I'm not a long FreeBSD > > > user, but from my point of view this error could really be related to > > > ACPI/APM, as already has been suggested. > > > > It smells a bit that way to me too. I've just read the whole thread, > > but going back to the original post's kernel conf, android had APM and > > apm_saver in there, but the dmesg confirmed an ACPI boot, complete with > > a complaint by apm_saver refusing to load because APM wasn't loaded. As > > it never is if ACPI is loaded, as I understand it. (caveat: 5.5-STABLE) > > > > android also mentioned trying to do things with APM settings in BIOS. I > > suspect APM should be _disabled_ in BIOS, and ACPI enabled, with ACPI > > power (etc) management used instead .. someone correct me if I'm wrong; > > I'm really unsure how much APM functional emulation remains in ACPI? > > > > > Maybe the machine is trying to go to suspend, but fails while doing > > > so, which in the end would mean that it can't recover from the > > > suspend, but has to reboot completely, resulting in dirty file > > > systems. It wouldn't reach the suspend state correctly, which could > > > leave everything depending on ACPI/APM in a undefined state, > including > > > the hardware. This would explain why the machine has to be turned off > > > properly by pressing toe power button for such a long time. > > > > Maybe. If APM is enabled in BIOS, but not loaded, could spell trouble. > > > > > I'd try to use the machine without ACPI/APM enabled. If possible, > > > compile a new kernel without it being enabled. This might not be > > > possible because you're on a SMP-system, thou, but you might want to > > > check your configuration files for suspend or hibernation -- and turn > > > them of. > > > > Well it won't likely work with _neither_ enabled, and I suspect you're > > right about SMP needing ACPI. android suggested failure to boot with > > neither enabled, which sounds likely. What's in /boot/loader.conf? > > > > Cheers, Ian > > > > > With ACPI/APM turned on, leave the machine idle for some time and see > > > if it shows the same behaviour. When it shuts down cleanly it's > likely > > > that suspend/hibernation fails due to the high load introduced by the > > > build process. > > > > > > I've seen and experienced similar problems on other platforms, such > as > > > OS X and (sorry) Linux. > > > > > > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?c7aff4ef0608162350r538ddb45nc7349c9e062bbcd3>