Date: Wed, 22 Jul 2009 20:43:57 +0200 From: Michael Gmelin <freebsdusb@bindone.de> To: Hans Petter Selasky <hselasky@c2i.net> Cc: freebsd-usb@freebsd.org Subject: Re: [usb2] Garmin Edge 705 disconnects immediately Message-ID: <4A675DED.2000001@bindone.de> In-Reply-To: <200907221910.40562.hselasky@c2i.net> References: <4A62187E.1000506@bindone.de> <200907221629.58612.hselasky@c2i.net> <4A67379D.3030601@bindone.de> <200907221910.40562.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hans Petter Selasky wrote: > On Wednesday 22 July 2009 18:00:29 Michael Gmelin wrote: >> Hans Petter Selasky wrote: >>> On Wednesday 22 July 2009 15:55:36 Michael Gmelin wrote: >>>> Hans Petter Selasky wrote: >>>> >>>> Did you have a chance to look at this yet? Anything more I could do? >>>> Thanks! >>> Hi, >>> >>> Can you try the attached patch. Needs to be applied by hand. >>> >>> Then compile new kernel, reboot. >>> >>> kldload usb_quirk >>> >>> usbconfig -u xxx -a uuu add_dev_quirk_vplh <vid> <pid> <lo_rev> <hi_rev> >>> UQ_CFG_PRESET >>> >>> You need to fill in the correct vendor id, product id, lo rev and hi rev >>> for your device. See the dump_device_desc output for your device. >>> >>> --HPS >> Hello, >> >> I merged in the changes to make that quirk work (couldnt use the patches >> directly because I'm on another version). Unfortunately dump_device_desc >> doesn't work, because the device disappears before I can get the info >> (but I have it anyway, so this is no issue). >> >> kldload usb2_controller_uhci >> kldload usb2_storage_mass >> kldload usb2_quirk >> usbconfig add_dev_quirk_vplh 0x091e 0x2271 0x0000 0xffff UQ_CFG_PRESET >> (also tried specifying -u and -a) >> >> According to the logs it's still setting config index 0 in >> usb2_alloc_device (but this config misleading debug ouput I guess, >> because it calls the patched function later in there). The debug output >> suggests that the patch is actually working, but the result is the same >> > > Can you redo test with umass unloaded? > > --HPS > Did thatm, same effect, are you interested in the debug output?
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4A675DED.2000001>