Date: Wed, 11 Jul 2001 12:46:23 +0200 From: Andreas Gerstenberg <ag@teuto.net> To: freebsd-atm@freebsd.org Subject: How to configure ATM point to point interfaces? Message-ID: <135650000.994848383@ag.intra>
next in thread | raw e-mail | index | archive | help
Hi, I have a little problem defining point to point interfaces with FreeBSD using HARP with the IDT driver from Mark Tinguely. I want to replace a Lucent DSL-Terminator which have about 30 connected DSL-CPE's (Lucent Cellpipe). The present configuration is "unnumbered IP", the DSL-Terminator has one IP on its Fast-Ethernet and the IP Packets are routed on the CPE's Ethernet IP-Address. On the WAN (ATM) Interfaces is no transfer-net configured. I tried this configuration using a FreeBSD-Box (4.3-STABLE), but I didn't find out how to conpigure the ATM-interfaces "unnumbered". If I configure a transfer-net between the atm interface and the CPE (Cellpipe) everything works fine, for example: atm set netif idt0 atm 50 atm attach idt0 sigpvc ifconfig atm0 inet 212.8.196.173/30 atm add PVC idt0 0 103 AAL5 LLC/SNAP IP atm0 212.8.196.174 ..and route the customers net to 212.8.196.174. Of course, I can change all the configurations on the CPE's (adding a transfer-net on the WAN-IF, setting new default route, etc..) but this is a lot of work and must be done on all CPE's on the same time, which doesn't make the job easier :-) Any suggestions? Thanks, Andy To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-atm" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?135650000.994848383>