Date: Fri, 2 Sep 2005 13:13:05 +0200 From: Dominique Goncalves <dominique.goncalves@gmail.com> To: Gabor Esperon <gesperon@isncom.com> Cc: freebsd-stable@freebsd.org Subject: Re: VIA 6420 SATA150 RAID on 5.4 Message-ID: <7daacbbe050902041329543e23@mail.gmail.com> In-Reply-To: <665CF8C5-482E-4546-A1C1-804EB9BFB609@isncom.com> References: <200508251139.09787.doconnor@gsoft.com.au> <20050825160426.GA10134@slackbox.xs4all.nl> <665CF8C5-482E-4546-A1C1-804EB9BFB609@isncom.com>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] On 8/25/05, Gabor Esperon <gesperon@isncom.com> wrote: > > On Aug 25, 2005, at 12:04 PM, Roland Smith wrote: > > > On Thu, Aug 25, 2005 at 11:39:08AM +0930, Daniel O'Connor wrote: > > > >> Does anyone have one of these -> > >> atapci1: <VIA 6420 SATA150 controller> port 0xc400-0xc4ff, > >> 0xc000-0xc00f, > >> 0xbc00-0xbc03,0xb800-0xb807,0xb400-0xb403,0xb000-0xb007 irq 20 at > >> device 15.0 on pci0 > >> ata4: channel #0 on atapci1 > >> ata5: channel #1 on atapci1 > >> > > > > I've got 2 devices hanging on this controller 120 GB and 160 GD, both > > Western Digital. They both work fine. > > > > > >> With a RAID set up on it? Does it work? > >> > > > > I didn't try the RAID function. I use one of the drives for data, and > > the other one for dumps. > > > > Roland > > -- > > R.F.Smith (http://www.xs4all.nl/~rsmith/) Please send e-mail as > > plain text. > > public key: http://www.xs4all.nl/~rsmith/pubkey.txt > > > > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" > Hi, I use the same crontroler and I created a RAID-1 with 2 maxtor HDD but on FreeBSD 6.0-BETA-3. It's works well for the moment. ad4: 194481MB <Maxtor 6L200M0 BANC1G10> at ata2-master SATA150 ad6: 194481MB <Maxtor 6L200M0 BANC1G10> at ata3-master SATA150 ar0: 194480MB <VIA Tech V-RAID RAID1> status: READY ar0: disk0 READY (master) using ad4 at ata2-master ar0: disk1 READY (mirror) using ad6 at ata3-master # mount | grep ar0s1 /dev/ar0s1 on /raid (ufs, local, soft-updates) # df -h | grep ar0s1 /dev/ar0s1 184G 54G 115G 32% /raid Hope this help Regards. -- There's this old saying: "Give a man a fish, feed him for a day. Teach a man to fish, feed him for life." [-- Attachment #2 --] Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-BETA3 #0: Thu Sep 1 15:57:30 CEST 2005 root@beta:/usr/obj/usr/src/sys/BETA Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Sempron(tm) 2400+ (1666.49-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x681 Stepping = 1 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0480800<SYSCALL,MP,MMX+,3DNow+,3DNow> real memory = 201261056 (191 MB) avail memory = 187244544 (178 MB) ACPI APIC Table: <KM400 AWRDACPI> ioapic0 <Version 0.3> irqs 0-23 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <KM400 AWRDACPI> on motherboard acpi0: Power Button (fixed) pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0 pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0 pci_link2: <ACPI PCI Link LNKC> irq 12 on acpi0 pci_link3: <ACPI PCI Link LNKD> on acpi0 pci_link4: <ACPI PCI Link LNKE> on acpi0 pci_link5: <ACPI PCI Link LNKF> on acpi0 pci_link6: <ACPI PCI Link LNK0> on acpi0 pci_link7: <ACPI PCI Link LNK1> on acpi0 pci_link8: <ACPI PCI Link ALKA> irq 0 on acpi0 pci_link9: <ACPI PCI Link ALKB> irq 0 on acpi0 pci_link10: <ACPI PCI Link ALKC> irq 0 on acpi0 pci_link11: <ACPI PCI Link ALKD> irq 0 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <VIA 8235/8237 (Apollo KM400/KM400A) host to PCI bridge> mem 0xd0000000-0xd7ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) atapci0: <VIA 6420 SATA150 controller> port 0x9000-0x9007,0x9400-0x9403,0x9800-0x9807,0x9c00-0x9c03,0xa000-0xa00f,0xa400-0xa4ff irq 20 at device 15.0 on pci0 ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 atapci1: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xa800-0xa80f at device 15.1 on pci0 ata0: <ATA channel 0> on atapci1 ata1: <ATA channel 1> on atapci1 uhci0: <VIA 83C572 USB controller> port 0xac00-0xac1f irq 21 at device 16.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 21 at device 16.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 21 at device 16.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 21 at device 16.3 on pci0 uhci3: [GIANT-LOCKED] usb3: <VIA 83C572 USB controller> on uhci3 usb3: USB revision 1.0 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <VIA VT6202 USB 2.0 controller> mem 0xde000000-0xde0000ff irq 21 at device 16.4 on pci0 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <VIA VT6202 USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 pci0: <multimedia, audio> at device 17.5 (no driver attached) vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xc000-0xc0ff mem 0xde001000-0xde0010ff irq 23 at device 18.0 on pci0 miibus0: <MII bus> on vr0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto vr0: Ethernet address: 00:01:29:94:92:d2 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcd7ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 1666492235 Hz quality 800 Timecounters tick every 1.000 msec ad0: 39205MB <Maxtor 6E040L0 NAR61HA0> at ata0-master UDMA133 acd0: CDROM <SAMSUNG CD-ROM SH-152A/C504> at ata1-master UDMA33 ad4: 194481MB <Maxtor 6L200M0 BANC1G10> at ata2-master SATA150 ad6: 194481MB <Maxtor 6L200M0 BANC1G10> at ata3-master SATA150 ar0: 194480MB <VIA Tech V-RAID RAID1> status: READY ar0: disk0 READY (master) using ad4 at ata2-master ar0: disk1 READY (mirror) using ad6 at ata3-master Trying to mount root from ufs:/dev/ad0s1a pid 57055 (conftest), uid 0: exited on signal 11 (core dumped) pid 16877 (conftest), uid 0: exited on signal 12 (core dumped) vr0: changing name to 'net0'
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?7daacbbe050902041329543e23>