Date: Sun, 23 Jun 2002 14:04:09 +0300 From: "Покатович Валерий" <prosto_val@tut.by> To: freebsd-mobile@freebsd.org Message-ID: <web-3446673@tut.by>
next in thread | raw e-mail | index | archive | help
Hello all...
laptop: Aristo MP-995 (noname)
modem: Toshiba Optegra v.34 GSM-ready
I have troubles with o2micro cardbus conroller on freebsd
4.4
my pcmcia modem not work...
pccardc enabler 1 sio2 - halt system....
pccardc dumpcis:
Read return -1 bytes (expected 2)
Read return -1 bytes (expected 10)
pccardc: CIS code read: Cannot allocate memory
Configuration data for card in slot 1
2 slots found
suspect that needed to select an address of memory in
enabler,
but what exactly?
or not??
thanks..
p.s.
full dmesg:
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991,
1992, 1993, 1994
The Regents of the University of California. All
rights reserved.
FreeBSD 4.4-RELEASE #0: Sat Jun 22 16:50:37 GMT 2002
root@:/usr/src/sys/compile/val
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (303.69-MHz
686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 33488896 (32704K bytes)
avail memory = 29872128 (29172K bytes)
Preloaded elf kernel "kernel" at 0xc02d7000.
VESA: v2.0, 1664k memory, flags:0x0, mode table:0xc00c8b0b
(c0008b0b)
VESA: Silicon Motion SM710 VGA BIOS
Pentium Pro MTRR support enabled
Using $PIR table, 5 entries at 0xc00fdf00
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcm0: <Intel 443MX> port 0xd400-0xd43f,0xd000-0xd0ff irq 5
at device 0.1 on pci0
pci0: <unknown card> (vendor=0x0000, dev=0x0000) at 0.2
pci0: <VGA-compatible display device> at 2.0 irq 15
pcic0: <O2micro 6836/6860 PCI-Cardbus Bridge> mem
0xe1000000-0xe1000fff irq 11 at device 3.0 on
pci0
pcic0: Warning: O2micro OZ68xx chips may not work
pccard0: <PC Card bus (classic)> on pcic0
pcic1: <O2micro 6836/6860 PCI-Cardbus Bridge> mem
0xe1004000-0xe1004fff irq 11 at device 3.1 on
pci0
pcic1: Warning: O2micro OZ68xx chips may not work
pccard1: <PC Card bus (classic)> on pcic1
isab0: <PCI to ISA bridge (vendor=8086 device=7198)> at
device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f
at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
pci0: <UHCI USB controller> at 7.2 irq 15
chip1: <PCI to Other bridge (vendor=8086 device=719b)> at
device 7.3 on pci0
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on
isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <8 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ad0: 2067MB <FUJITSU MHF2021AT> [4200/16/63] at ata0-master
UDMA33
acd0: CDROM <CD-224E> at ata0-slave using PIO4
Mounting root from ufs:/dev/ad0s3a
pccard: card inserted, slot 1
---
Уникальная услуга "Диван-тур"! Заказав туристическую поездку на нашем
сайте http://www.bsail.com, Вы можете оформить все бумаги на отдых,
не выходя из квартиры или офиса! Тел. 285-36-88, 8-029-622-28-38.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?web-3446673>