Date: Mon, 24 Feb 2014 20:58:07 +0400 From: Alex Deiter <alex.deiter@gmail.com> To: Kevin Lo <kevlo@freebsd.org> Cc: freebsd-wireless@freebsd.org Subject: Re: Ralink RT3573 / ASUS USB-N66: run0: could not load 8051 microcode Message-ID: <CAAi9sia2_3SH=xUFKgnDqHJ4x7d9ch-KkgnQiw4gs_55DA1P0Q@mail.gmail.com> In-Reply-To: <530B060F.8030204@FreeBSD.org> References: <CAAi9siYMdL12t6jHMyt9ZUaC541qneFrB5dWh2ooK2_%2Bnnw9_Q@mail.gmail.com> <63a130f264cbfb29dc3fd34ab3170447.squirrel@mx.waitman.net> <CAAi9siaqTik7t5V5SW3qVXGqiWrKLNGORGHX__SeFy=jkBzReQ@mail.gmail.com> <53041318.6090303@FreeBSD.org> <530B060F.8030204@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello Kevin, Thank you very much! Successfully tested! 2014-02-24 12:42 GMT+04:00 Kevin Lo <kevlo@freebsd.org>: > On 2014/02/19 10:12, Kevin Lo wrote: > >> On 2014/02/18 14:17, Alex Deiter wrote: >> >>> Hello, >>> >> >> Hi Alex, >> >> >>> Thank you for your advice! >>> I found a workaround: >>> >>> # ifconfig wlan0 create wlandev run0 >>> >>> then wait 5 minutes ;-) >>> >>> and only thereafter: >>> >>> # ifconfig wlan0 up >>> >>> run0: <1.0> on usbus1 >>> run0: MAC/BBP RT3593 (rev 0x0402), RF RT3053 (MIMO 3T3R), address >>> 30:85:a9:f4:52:bd >>> uhid0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/1.01, addr 4> on >>> usbus1 >>> wlan0: Ethernet address: 30:85:a9:f4:52:bd >>> run0: firmware RT3071 ver. 0.33 loaded >>> >>> But found another issue: ifconfig wlan0 list scan command does not show >>> any >>> results: >>> >>> root@test:~ # ifconfig wlan0 list scan >>> root@test:~ # >>> >>> root@test:~ # wlandebug -i wlan0 scan >>> net.wlan.0.debug: 0x0 => 0x200000<scan> >>> >>> wlan0: sta_pick_bss: no scan candidate >>> wlan0: scan_task: done, restart [ticks 487917, dwell min 20 scanend >>> 2147963261] >>> wlan0: scan_task: chan 140a -> 1g [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 1g -> 6g [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 6g -> 11g [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 11g -> 7g [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 7g -> 52a [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 52a -> 56a [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 56a -> 60a [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 60a -> 64a [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 64a -> 36a [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 36a -> 40a [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 40a -> 44a [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 44a -> 48a [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 48a -> 2g [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 2g -> 3g [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 3g -> 4g [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 4g -> 5g [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 5g -> 8g [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 8g -> 9g [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 9g -> 10g [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 10g -> 149a [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 149a -> 153a [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 153a -> 157a [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 157a -> 161a [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 161a -> 100a [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 100a -> 104a [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 104a -> 108a [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 108a -> 112a [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 112a -> 116a [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 116a -> 120a [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 120a -> 124a [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 124a -> 128a [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 128a -> 132a [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 132a -> 136a [active, dwell min 20ms max 200ms] >>> wlan0: scan_task: chan 136a -> 140a [active, dwell min 20ms max 200ms] >>> wlan0: sta_pick_bss: no scan candidate >>> >> >> I have an ZyxXEL NWD2705 working fine. It has the exact same chipset as >> the ASUS USB-N66. So far I haven't been able to come up with a good >> solution to your problem. I purchased the ASUS USB-N66 and will arrive >> in the next couple of days. Hope I could find a new interesting bug :-) >> > > After r258363, I forgot to add a flag to run's device list which uses a > standard scsi eject. The ASUS USB-N66 has been tested to work on my > laptop. > The attached patch should fix your problem :-) Please test it, thanks. > > Kevin > -- Alex Deiter
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAAi9sia2_3SH=xUFKgnDqHJ4x7d9ch-KkgnQiw4gs_55DA1P0Q>