Date: Tue, 22 Jan 2008 16:07:25 -0500 From: "Aryeh M. Friedman" <aryeh.friedman@gmail.com> To: Hugo Silva <hugo@barafranca.com> Cc: freebsd-stable@freebsd.org Subject: Re: 7.0-RC1 ath0 will not work for more than a couple days (Access Point) Message-ID: <47965B0D.5060606@gmail.com> In-Reply-To: <47965727.3040307@barafranca.com> References: <47965727.3040307@barafranca.com>
next in thread | previous in thread | raw e-mail | index | archive | help
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 The most recently committed re(4) modifications correct this. Hugo Silva wrote: > re0: discard frame w/o packet header re0: discard frame w/o packet > header re0: discard frame w/o packet header re0: discard frame w/o > packet header re0: discard frame w/o packet header re0: discard > frame w/o packet header re0: discard frame w/o packet header re0: > discard frame w/o packet header re0: discard frame w/o packet > header re0: discard frame w/o packet header re0: discard frame w/o > packet header re0: discard frame w/o packet header re0: discard > frame w/o packet header re0: discard frame w/o packet header re0: > discard frame w/o packet header re0: discard frame w/o packet > header re0: discard frame w/o packet header re0: discard frame w/o > packet header ath0: stuck beacon; resetting (bmiss count 4) ath0: > ath_reset: unable to reset hardware; hal status 3 ath0: stuck > beacon; resetting (bmiss count 4) ath0: ath_reset: unable to reset > hardware; hal status 3 ath0: device timeout ath0: stuck beacon; > resetting (bmiss count 4) ath0: ath_reset: unable to reset > hardware; hal status 3 ath0: device timeout ath0: stuck beacon; > resetting (bmiss count 4) ath0: ath_reset: unable to reset > hardware; hal status 3 ath0: device timeout ath0: stuck beacon; > resetting (bmiss count 4) ath0: ath_reset: unable to reset > hardware; hal status 3 ath0: stuck beacon; resetting (bmiss count > 4) ath0: ath_reset: unable to reset hardware; hal status 3 ath0: > stuck beacon; resetting (bmiss count 4) ath0: ath_reset: unable to > reset hardware; hal status 3 ath0: stuck beacon; resetting (bmiss > count 4) ath0: ath_reset: unable to reset hardware; hal status 3 > ath0: stuck beacon; resetting (bmiss count 4) ath0: ath_reset: > unable to reset hardware; hal status 3 ath0: device timeout ath0: > stuck beacon; resetting (bmiss count 4) ath0: ath_reset: unable to > reset hardware; hal status 3 ath0: stuck beacon; resetting (bmiss > count 4) ath0: ath_reset: unable to reset hardware; hal status 3 > > > > > > ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 > mtu 2290 inet 192.168.200.110 netmask 0xffffff00 broadcast > 192.168.200.255 media: IEEE 802.11 Wireless Ethernet autoselect > mode 11g <hostap> status: associated ssid zaurak_wifi channel 5 > (2432 Mhz 11g) bssid authmode WPA2/802.11i privacy MIXED deftxkey 2 > TKIP 2:128-bit TKIP 3:128-bit txpower 31.5 scanvalid 60 bgscan > bgscanintvl 300 bgscanidle 250 roam:rssi11g 7 roam:rate11g 5 pureg > protmode CTS wme burst hidessid -apbridge dtimperiod 1 > > > > > FreeBSD zaurak.bsdlan.org 7.0-RC1 FreeBSD 7.0-RC1 #1: Wed Jan 2 > 01:45:03 WET 2008 klr@zaurak.bsdlan.org:/usr/obj/usr/src/sys/ZAURAK > amd64 > > > > ath0@pci0:5:1:0: class=0x020000 card=0x5a001385 > chip=0x0013168c rev=0x01 hdr=0x00 vendor = 'Atheros > Communications Inc.' device = 'AR5212, AR5213 802.11a/b/g > Wireless Adapter' class = network subclass = ethernet > re0@pci0:5:4:0: class=0x020000 card=0x820d1043 chip=0x816710ec > rev=0x10 hdr=0x00 vendor = 'Realtek Semiconductor' device = > 'RTL8169/8110 Family Gigabit Ethernet NIC' class = network > subclass = ethernet > > > > > ifconfig'ing ath0 up and down continuously will either make it > usable again for a few hours or result in a panic. > > Regards, > > Hugo > > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable To > unsubscribe, send any mail to > "freebsd-stable-unsubscribe@freebsd.org" > - -- Aryeh M. Friedman FloSoft Systems, Java Tool Developers Developer, not business, friendly http://www.flosoft-systems.com "Free software != Free beer" Blog: http://www.flosoft-systems.com/flosoft_systems_community/blogs/aryeh/index.php -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHllsNQi2hk2LEXBARAobHAKDfiFNge8q3sst9Ia30GyTkSgy0FgCfbyq2 rcnrU+x+AGRhTjkl0It4h90= =ybea -----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?47965B0D.5060606>